FeenixMakers
/
vcore
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

some unification of sections

This commit is contained in:
Torsten 2023-01-30 15:04:04 +02:00
parent fda68e3dee
commit 7b25917946
1 changed files with 41 additions and 111 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

152
printer.cfg
View File

@ -12,7 +12,6 @@
baud: 250000
serial: /dev/btt-octopus-11
[temperature_sensor Octopus]
sensor_type: temperature_mcu
min_temp: 0
@ -105,8 +104,10 @@ rotation_distance: 40
microsteps: 64
homing_speed: 50
homing_retract_dist: 0
position_max: 500
[stepper_y]
position_max: 500
step_pin: PG0
dir_pin: PG1
enable_pin: !PF15
@ -124,6 +125,7 @@ rotation_distance: 4
microsteps: 64
position_min: -5 # Needed for z-offset calibration and tilt_adjust.
homing_speed: 10
position_max: 500
[stepper_z1]
step_pin: PE2
@ -166,102 +168,52 @@ square_corner_velocity: 5
uart_pin: PC4
run_current: 1.1
stealthchop_threshold: 1
driver_TBL: 1
driver_TOFF: 3
driver_HEND: 0
driver_HSTRT: 0
[tmc2209 stepper_y]
uart_pin: y_uart_pin
uart_pin: PD11
run_current: 1.1
stealthchop_threshold: 1
driver_TBL: 1
driver_TOFF: 3
driver_HEND: 0
driver_HSTRT: 0
[tmc2209 stepper_z]
uart_pin: PE4
run_current: 1.0
stealthchop_threshold: 1
driver_TBL: 1
driver_TOFF: 3
driver_HEND: 0
driver_HSTRT: 0
[tmc2209 stepper_z1]
uart_pin: PE1
run_current: 1.1
stealthchop_threshold: 1
driver_TBL: 1
driver_TOFF: 3
driver_HEND: 0
driver_HSTRT: 0
[tmc2209 stepper_z2]
uart_pin: PD3
run_current: 1.0
stealthchop_threshold: 1
driver_TBL: 1
driver_TOFF: 3
driver_HEND: 0
driver_HSTRT: 0
[tmc2209 extruder]
uart_pin: PC6
run_current: 0.5
run_current: 0.35
stealthchop_threshold: 0
[tmc2209 stepper_z]
uart_pin: z0_uart_pin
run_current: 1.0
stealthchop_threshold: 1
[tmc2209 stepper_z1]
uart_pin: PE1
run_current: 1.1
stealthchop_threshold: 1
[tmc2209 stepper_z2]
uart_pin: PD3
run_current: 1.0
stealthchop_threshold: 1
[tmc2209 stepper_x]
uart_pin: PC4
run_current: 1.1
stealthchop_threshold: 1
[tmc2209 stepper_y]
uart_pin: y_uart_pin
run_current: 1.1
stealthchop_threshold: 1
[tmc2209 extruder]
uart_pin: PC6
run_current: 0.5
stealthchop_threshold: 0
[tmc2209 stepper_z]
uart_pin: z0_uart_pin
run_current: 1.0
stealthchop_threshold: 1
[tmc2209 stepper_z1]
uart_pin: PE1
run_current: 1.1
stealthchop_threshold: 1
[tmc2209 stepper_z2]
uart_pin: PD3
run_current: 1.0
stealthchop_threshold: 1
[tmc2209 stepper_x]
uart_pin: PC4
run_current: 1.1
driver_TBL: 1
driver_TOFF: 3
driver_HEND: 0
driver_HSTRT: 0
[tmc2209 stepper_y]
uart_pin: y_uart_pin
run_current: 1.1
driver_TBL: 1
driver_TOFF: 3
driver_HEND: 0
driver_HSTRT: 0
[tmc2209 stepper_z]
uart_pin: z0_uart_pin
run_current: 1.1
driver_TBL: 1
driver_TOFF: 3
driver_HEND: 0
driver_HSTRT: 0
[tmc2209 stepper_z1]
uart_pin: PE1
run_current: 1.1
driver_TBL: 1
driver_TOFF: 3
driver_HEND: 0
driver_HSTRT: 0
[tmc2209 stepper_z2]
uart_pin: PD3
run_current: 1.1
driver_TBL: 1
driver_TOFF: 3
driver_HEND: 0
driver_HSTRT: 0
#############################################################################################################
### HOMING
@ -274,7 +226,7 @@ control_pin: PB6
speed: 7
pin_move_time: 0.675
sample_retract_dist: 10
pin_move_time: 0.8
pin_up_reports_not_triggered: True
pin_up_touch_mode_reports_triggered: True
x_offset: -28
@ -302,14 +254,6 @@ z_hop: 12
#############################################################################################################
[stepper_x]
position_max: 500
[stepper_y]
position_max: 500
[stepper_z]
position_max: 500
[bed_mesh]
horizontal_move_z: 5
@ -357,10 +301,6 @@ min_temp: 0
max_temp: 400
pressure_advance: 0.05
[tmc2209 extruder]
run_current: 0.35
stealthchop_threshold: 0
[firmware_retraction]
retract_speed: 60
unretract_extra_length: 0
@ -471,16 +411,6 @@ dir_pin: !PA14 # Add ! in front of pin name to reverse Z2 direction
rotation_distance: 4 # 4 for TR8*4 lead screws
endstop_pin: probe: z_virtual_endstop
#Z Probe configuration
[bltouch]
sensor_pin: ^PB7
control_pin: PB6
x_offset: -27.0
y_offset: -21.0
#pin_up_touch_mode_reports_triggered: True
pin_move_time: 0.8
#z_offset: 3.20 # USE FOR PLA
#z_offset: 2.75 # USE FOR PETG
# [probe]
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!