Update README_en.md

Delete app-release.apk
bug-fixed
2026-07-27 21:51:29 +08:00 · 2026-07-27 21:48:33 +08:00 · 2026-07-27 21:48:01 +08:00 · 2026-07-27 21:33:17 +08:00 · 2026-07-26 21:51:35 +08:00 · 2026-07-24 23:03:46 +08:00
42 changed files with 1867 additions and 63 deletions
@@ -1,42 +1,805 @@
+## What is SG?

-A mobile gateway that exposes the intranet service points. <br>
-Free, after testing will be open source. <br>
-It contains a Android client app and server program.<br>
-Usage:<br>
-### 1、download android client app<br>
-### 2、register user（the invitation code must be numeric and can be filled with any value）<br>
-![login](https://github.com/lazy-luo/smarGate/blob/master/res/login.png)<br>
-![register](https://github.com/lazy-luo/smarGate/blob/master/res/register.png)<br>
-### 3、remember register key-number(N)<br>
-![register result](https://github.com/lazy-luo/smarGate/blob/master/res/registerok.png)<br>
-### 4、download server program matched you serverOS<br>
-### 5、modify config file(conf-proxy.xml):<br>
+* A cross-network-segment remote port mapping tool
+  * Supports intranet-to-intranet and intranet-to-extranet mapping
+* A portable, flexibly-controlled access gateway
+  * All configuration is done on the app client — full visibility, highly secure and controllable
+  * Access entries can be configured on the mobile phone running the app, or on any SG server computer
+* A simple remote file management tool
+  * Perform file management operations on both the mobile device and server endpoints
+* A simple SOCKS proxy tool
+* A simple HTTP(S) proxy tool
+* ......
+
+## Key Features
+
+* All mappings are configured through the app client; the server requires zero configuration at runtime
+* Supports server-to-app and server-to-server port mapping
+  * Map any port of any machine on the server's LAN to the app's mobile phone, enabling penetration access via the phone's local port
+  * Through app client configuration, map any host/port on Server A's LAN to Server B's host
+* Supports chained proxy
+* Supports multi-user isolation
+* Supports IPv4/IPv6 with TCP-based P2P tunneling
+* Supports self-hosted proxy for data forwarding
+* Supports encrypted data tunnels (TLS)
+* Supports automatic tunnel selection
+  * Priority: P2P → custom proxy → official proxy (fallback)
+* Supports automatic version upgrades and one-click upgrade from the app client
+* SOCKS and HTTP(S) proxy support custom IP whitelists and domain whitelists, including CIDR IP ranges and domain wildcards
+* Supports both TCP and UDP protocols
+  * UDP uses UDP-over-TCP mode
+* ......
+
+## What Problems Does SG Solve?
+
+* Secure access to intranet resources regardless of network boundaries
+* High-bandwidth secure data transfer via P2P
+* Exposing intranet services when you have a public IP
+* ......
+
+## SG Version Guide   
+
+  Android provides two build variants (Product Flavors), **Base** and **Advance**, sharing the same codebase and     
+  differentiated through compile-time feature toggles + R8 dead code elimination:
+                                                                                                                     
+  | Feature | Base | Advance |                                                                                       
+  |------|:----:|:-------:|
+  | Proxy Tunnel | ✓ | ✓ |                                                                                           
+  | File Management | ✓ | ✓ |                                                                                        
+  | Audio Capture/Transmission | ✗ | ✓ |                                                                             
+  | GPS Location Tracking | ✗ | ✓ |                                                                                  
+  | App Upgrade | ✗ | ✓ |                                                                                            
+  | Screen/Camera Monitoring | ✗ | ✗ |                                                                               
+                                                                                                                     
+  - **Base** — Lightweight edition. Retains only core proxy tunneling and file management, stripping out             
+  high-permission/high-risk modules such as audio, location, upgrade, and monitoring. Smaller APK size with fewer    
+  permissions, ideal for users who only need basic proxy and file access.                                            
+  - **Advance** — Full-featured edition. Includes all feature modules except monitoring, supporting remote audio,
+  location tracking, app upgrade, and other advanced capabilities. Suitable for users who require complete remote    
+  management functionality.
+    * Huawei phones may flag the Advance version as a "fraud app" by default. To install, first disable Pure Mode,   
+  then enable Airplane Mode on the phone before installing. For similar issues on other phone brands, search for     
+  solutions online.
+
+## How to Use SG?
+
+* Download the app and register
+* Download the appropriate server version, configure it with your User ID, and run it
+* Log into the app and configure port mapping rules
+* Use the configured mappings to access your services
+
+## Want to Dive Deeper?
+
+<details>
+<summary>
+<mark><font size=3 color=darkred>View Details</font></mark>
+</summary>
+
+#
+## Quick Overview <a href=https://github.com/lazy-luo/smarGate/wiki/快速上手手册>[Quick Start Guide]</a> <a href="https://www.bilibili.com/video/BV1LM411k7Rf">[Video Tutorial - Bilibili]</a><br>
+* **Platform support**: Linux, Windows, macOS, Android (enterprise: HP-UX, Solaris, AIX)<br>
+* **CPU architectures**: x86, ARM, MIPS, RISC-V, LoongArch64 (enterprise: Alpha, PowerPC, SPARC)<br>
+* **Security-first**: "Intranet-to-intranet" tunneling — no ports exposed to the public internet, no firewall configuration changes<br>
+* **Bandwidth-focused**: P2P access to intranet services with "4G phone + IPv6 broadband" (TCP-based, NAT1-3 traversal for IPv4)<br>
+* **Cost-effective**: No VPS required, no public IP needed; repurpose old Android phones as servers<br>
+* **Reliable**: Available on demand, supports 24/7 uninterrupted service, free from UDP QoS throttling<br>
+* **Controllable**: Single-point configuration on the client, with the ability to start/stop services anytime, anywhere<br>
+* **Lightweight**: No installation required, compact footprint (mini version ~1MB), all-in-one, high performance with minimal resource usage<br>
+* **Portable**: Whether working or on vacation, as long as your phone has a network connection, everything is under control<br>
+* ......If all this sounds like what you need, keep reading; if you want more, please submit an issue — the [Changelog] is worth checking out too<br>
+* **Free**. Considering open-sourcing after stability testing.<br>
+* Includes an Android client and a server component to be installed within the intranet.<br>
+
+## App Configuration (Required) — Common Misconfiguration Issues
+* **Must** grant "Allow background execution" permission, otherwise the system will disconnect when switching to background
+* **Must** enable "Keep network connection during sleep", otherwise the system will disconnect when entering sleep mode
+* **Recommended** to grant "Allow auto-start" permission, otherwise the Android server mode cannot auto-start on boot (v0.30+)
+* **Recommended** to grant "Microphone" permission, otherwise the Android server cannot provide audio monitoring (v0.30+)
+* **Note**: SG's official proxy does not forward data to IPs in Hong Kong, Macau, Taiwan, or overseas
+
+## What is smarGate?<br>
+#### Officially named "Mobile Gateway" — exposes intranet server networks on demand through a mobile client, with the core engine implemented in C++.<br>
+#### The "Mobile Gateway" is a user-private gateway. All shared access entries reside on the client, unlike other tunneling tools that primarily promote domain-oriented public access entries. Analogy: smarGate is like carrying your security door with you; other tunneling products are like placing your security door in a public space — sure, it needs a key, but there's a profession called locksmithing...<br>
+
+##### Technical Highlights:<br>
+* **Security** <br>
+  * The mobile client serves as the primary access gateway — open on demand, close promptly.<br>
+  * Supports server-to-server port mapping networking (v0.31+).<br>
+  * Computers can connect to the phone's hotspot or WiFi to access intranet services through ports exposed by the phone (the client displays the phone's IP).<br>
+  * Mobile networks are generally private network segments inaccessible to others.<br>
+  * User isolation.<br>
+* **Extensibility**<br>
+  * Based on intranet segment proxying, can work with numerous tools to enable various network services (Telnet, SSH, HTTP services, intranet cameras, remote desktop, etc.)<br>
+  * Geek-oriented: can access custom intranet services (RPC)<br>
+* **Convenience**<br>
+  * Single-point configuration on the mobile client<br>
+  * Dynamic addition/removal of service capabilities<br>
+* **High Performance**<br>
+  * Since v0.1.1, uses a self-developed network engine with high performance — a budget phone client can support 1,000+ concurrent shared accesses<br>
+  * High-performance design:<br>
+    * Cross-platform socket multiplexing supporting poll, epoll, kqueue, port, select, IOCP models<br>
+    * Lock-free algorithms<br>
+    * Thread pool design<br>
+    * Socket connection pool<br>
+    * Multi-level task queues<br>
+    * ...<br>
+<details>
+<summary>
+<mark><font size=6 color=darkred>Attachment: Architecture Diagram</font></mark>
+</summary>
+<img src="https://github.com/lazy-luo/smarGate/blob/master/res/smarGateArch.png" /><br>
+</details>
+
+## What Are the Main Features of smarGate?<br>
+* **Proxy tunneling support**<br>
+  * Official free proxy servers are provided (shared bandwidth, slower with multiple users — best practice is to set up your own proxy server)<br>
+  * <I>If you have your own cloud server (with a public IP), you can configure a custom proxy server by installing proxy_server on it. All data will be forwarded through your configured proxy server (the proxy server requires certificates, which can be auto-generated or you can use existing ones).</I> <br>
+
+```
+  1. Proxy server configuration (the proxy server must allow inbound connections on any port):
+```
 ```
  <?xml version="1.0" encoding="GBK"?>
    <app-config code="PROXY" name="proxy-server">
+        <app-parameter>
+            <proxy-service-port value="9001"/><!-- Custom proxy port -->
+            <owner-id value="xxxx" /><!-- xxxx is the User ID returned after successful registration -->
+            <access-token value="nnnnn"/><!-- Access token, must be numeric [Optional] -->
+            <ssl-create-certfile value="true" /><!-- If no certificate is specified below, auto-generate one [requires openssl installed]. Default is false (no auto-generation) -->
+          <!-- If you have your own certificate and private key, configure them below to enable secure SSL channels. Filenames must be correct. If you don't have certificates, you can use the auto-generation option above.
+            <ssl-cacert-file value="xxx.crt"/>
+            <ssl-privatekey-file value="xxx.key"/>
+          -->
+       </app-parameter>
+       <moudle-parameter>
+        <log-level value="LOG_ERROR"/>
+        <log-write-mode value="CONSOLE_ONLY"/>
+      </moudle-parameter>
+  </app-config>
+```
+```
+  2. Add the following configuration on the server side:
+```
+```
+......
+    <app-parameter>
+             <ssl-create-certfile value="true" />
+       <!-- If the proxy server has SSL enabled, certificates and private key must be configured here
+         <ssl-cacert-file value="xxx.crt"/>
+         <ssl-privatekey-file value="xxx.key"/>
+       -->
+    </app-parameter>
+    <moudle-parameter>
+      ......
+    </moudle-parameter>
+    <!-- Configure the proxy server IP or domain + port above. Note: the IP must be a public IP. The ssl option must be correctly configured — set to true if the proxy server has certificates (including auto-generated ones) and they are active, otherwise false -->
+    <channel address="xxx.xxx.xxx.xxx:9001" ssl="true" token="nnnnn" /><!-- Access token, must match the proxy server; omit if not configured -->
+```
+* **P2P channel support**<br>
+  * Uses TCP protocol for P2P tunneling, enhancing security<br>
+  * Not all networks support P2P — depends on the NAT types at both ends
+  * v0.14+ directly supports IPv6 with firewall traversal capability
+  * P2P test conclusion: P2P fails when one end is NAT4 and the other is NAT3 or NAT4<br>
+  Note: NAT1 → Full Cone, NAT2 → Restricted Cone, NAT3 → Port Restricted Cone, NAT4 → Symmetric<br>
+  <table>
+    <th>Server NAT</th><th>Client NAT</th><th>P2P Success</th>
+    <tr><td>NAT1-3</td><td>NAT1-3</td><td>YES</td></tr>
+    <tr><td>NAT1-2</td><td>NAT4</td><td>YES</td></tr>
+    <tr><td>NAT4</td><td>NAT1-2</td><td>YES</td></tr>
+    <tr><td>NAT4</td><td>NAT3-4</td><td>NO</td></tr>
+    <tr><td>NAT3-4</td><td>NAT4</td><td>NO</td></tr>
+  </table>
+
+* **Public exposure support** (contrary to the security-first design philosophy, opened in v0.31)<br>
+  * The primary mode promoted by other intranet tunneling tools — directly mapping intranet services to public-facing ports<br>
+* **Server-to-server P2P port mapping** (v0.31+)<br>
+  * Configuration primarily via the ip@index format<br>
+
+<details>
+<summary>
+<mark><font size=6 color=darkred>Attachment: Key Feature Summary</font></mark>
+</summary>
+
+```
+1. TCP-based P2P connection tunnels
+  — Secure and reliable, avoids QoS throttling
+2. Transparent proxying for all TCP-based protocols
+  — Can proxy all intranet TCP services (SSH, RDP, SMB, VNC, cameras, databases, etc.)
+3. HTTP and HTTPS-to-HTTP support
+  — HTTP header rewriting, proxying HTTPS services as HTTP
+4. UDP-over-TCP
+  — Proxy support for UDP-based services
+5. Transparent IPv6 tunneling (no need to manage IPv6 addresses)
+  — Automatic IPv6 tunnel establishment, always use IPv4 addresses for access
+6. Custom proxy support (requires a public IP) — handles all data forwarding
+  — Automatically connects to the custom proxy when P2P is unavailable
+7. Custom proxy supports token and whitelist configuration
+  — Security mechanisms included
+8. Multi-level cascading proxy
+  — Chained proxy support, multi-level loop-free proxy
+9. Mobile phone as the sole access gateway — security + mobile convenience
+  — Phone in hand, access on demand
+10. Fully dynamic port mapping configuration with hot-plug support
+  — Proxy additions and deletions take effect immediately, no restart required
+11. All features configurable from the app — single-point configuration
+  — Client-side one-click configuration, server requires zero config at runtime
+12. Automatic P2P tunnel and custom proxy tunnel detection and connection
+  — No manual intervention; the app auto-connects and auto-retries
+13. Dynamic and designated negotiation port support
+  — Default dynamic port negotiation; supports designated negotiation ports for firewall configuration
+14. Tunnel connection priority (P2P → Custom Proxy → Official Proxy)
+  — Priority-based tunnel selection during data transfer
+15. SSL-encrypted tunnels
+  — SSL encryption for both P2P and proxy tunnels, ensuring data confidentiality
+16. Traffic throttling support
+  — Network bandwidth limiting, unlimited by default
+17. Automatic network switch detection (e.g., Mobile ↔ WiFi) with auto-reconnection
+  — Intelligent app-side reconnection, always ensuring service availability
+18. Cross-LAN host port mapping — direct public access if one host has a public IP (v0.31+)
+  — Server-to-server mesh mapping, traffic does not pass through the mobile app (traditional tunneling mode)
+19. App supports server mode — can configure the phone as a server
+  — Android phones can act as servers
+20. Remote file management: browse, upload, download, delete, with resume support (v0.31.6+)
+  — File management features activate when P2P or custom proxy connections are available; basic file operations on both phone and server
+21. Built-in SOCKS5 and HTTP proxy (v0.32.1+)
+  — Since professional third-party tools like SS5 and Squid exist, SOCKS5 and HTTP proxy are optional features
+22. SOCKS5 and HTTP proxy support domain and IP whitelists (v0.32.1+)
+  — Domain whitelist supports four match modes (exact, prefix, suffix, substring), default config file: .white_list
+  — IP whitelist supports CIDR-format IP range configuration, default config file: .ipchecks
+...to be continued
+
+```
+</details>
+
+## Usage Guide:<br>
+<a href="https://www.bilibili.com/video/BV1LM411k7Rf">Video Tutorial - Bilibili</a><br><br>
+<a href="https://www.baidu.com/s?wd=smargate%20内网穿透">Usage Examples - Baidu</a><br><br>
+<a href="https://www.google.com/search?q=smargate+内网穿透">Usage Examples - Google</a>
+
+### 1. Download the App & Register a New User
+* Download the Android app (app-release.apk includes both client and server) — supports armv7 and arm64 CPU architectures<br>
+* Register a new user (invitation code is required, must be numeric, can be anything. Note: if required fields are incomplete or contain Chinese characters, registration will fail)<br>
+* After successful registration, be sure to remember the returned Service ID (N). **[Important]**: You must complete your first login within 1 hour of registration<br>
+<details>
+<summary>
+<mark><font size=5 color=darkred>Expand Screenshots</font></mark>
+</summary>
+<img src="https://github.com/lazy-luo/smarGate/blob/master/res/login.png" /><br>
+<img src="https://github.com/lazy-luo/smarGate/blob/master/res/reg.png" /><br>
+</details>
+
+### 2. Download the Server & Configure
+* Download the appropriate server version for your intranet environment (currently supporting Linux x86-32/64, Windows, and Linux-ARM [Raspberry Pi, Synology]; also: Android app has built-in server mode)<br>
+* Extract the server archive and modify the configuration file (conf-proxy.xml):<br>
+<details>
+<summary>
+<mark><font size=5 color=darkred>Configuration Example</font></mark>
+</summary>
+
+```
+  <?xml version="1.0" encoding="GBK"?>
+    <app-config code="PROXY" name="proxy-server">
+       <app-parameter>
+    <!-- [ none | first | only ], none is default. Enable SSL encryption for P2P connections; "only" means only encrypted connections are accepted -->
+    <ssl-tunnel-required value="first" />
+    <!-- If no certificate is specified below, auto-generate one [requires openssl installed]. Default is false (no auto-generation) -->
+    <ssl-create-certfile value="true" />
+ <!-- The following options apply only to the mini version under dynamic. Specify the actual paths of the SSL and crypto libraries. On Linux, obtain via: ldd $(which openssl)|grep -E "libssl|libcrypto"|awk '{print $1}'
+    <libssl value="libssl.so" />
+    <libcrypto value="libcrypto.so" />
+ -->
+       </app-parameter>
       <moudle-parameter>
        <log-level value="LOG_ERROR"/>
        <log-write-mode value="CONSOLE_ONLY"/>
        <app-name value="xxxxx [name of service points]." /><!-- need modify -->
        <app-description value="yyyyy [description of service points]" /><!-- need modify -->
-        <user-audit value="N:index"/><!-- need modify (N is step 3 return,index is you service point order. e.g:[12345:1])-->
+    <!-- user-audit need modify (N is the Service ID returned after successful registration; index is a custom server instance number, recommended starting from 1, must not duplicate. e.g., [12345:1])-->
+        <user-audit value="N:index"/>
    </moudle-parameter>
  </app-config>
 ```
-### 6、excute shell "nohup ./proxy_server -i1000 -o1000 -w8 >/dev/null &"(parameter i:input connections,o:output connections,w:max threads)<br>
-### 7、login from android client app<br>
-![operator](https://github.com/lazy-luo/smarGate/blob/master/res/oper1.png)<br>
-### 8、create service local proxy in android app<br>
-![operator](https://github.com/lazy-luo/smarGate/blob/master/res/oper2.png)<br>
-![operator](https://github.com/lazy-luo/smarGate/blob/master/res/oper3.png)<br>
-### 9、enjoy it！<br>
-## ps:<br>
-* The server does dependless any third party package.<br>
-* Android Client app requires permission:<br>
->> 1、background running privileges<br>
->> 2、network access<br>
-* Cell phone settings (Android):<br>
->> 1、setting -> wireless and network -> WLAN -> maintain WLAN connections in dormant state  "ALLOW"<br>
->> 2、setting -> wireless and network -> mobile network -> advanced ->always connected network data service "ALLOW"<br>
+</details>

+### 3. Run the Intranet Server (command parameters: i = max inbound connections, o = max outbound connections, w = max threads)<br>
+* **Linux**: `chmod +x proxy_server && nohup ./proxy_server -i1000 -o1000 -w8 >/dev/null &` <br>
+* **Windows**: `proxy_server.exe -i1000 -o1000 -w8` <br>
+* **Android phone/device**: Run the app → in edit mode, configure server info → toggle "Server" switch on → restart the app <br>
+* **OpenWrt MIPS devices**: see <a href=https://github.com/lazy-luo/smarGate/issues/65>[Correct usage on MIPS Linux]</a><br>

+### 4. Log into the Mobile App & Configure Port Mappings <a href="https://github.com/lazy-luo/smarGate/wiki/常用服务穿透配置">[Common Service Configurations]</a><br>
+* In the client, you can see the online servers ("Access Points") and define port mapping rules on the client<br>
+<details>
+<summary>
+<mark><font size=5 color=darkred>Expand Screenshots</font></mark>
+</summary>
+<img src="https://github.com/lazy-luo/smarGate/blob/master/res/proxy.png" /><br>
+<b>For server-to-server port mapping, append the server index number to the IP in the format: ip@idx</b>
+<img src="https://github.com/lazy-luo/smarGate/blob/master/res/server-proxy.png" /><br>
+</details>
+
+### 5. Computers or Phones Can Access Services Configured on the Mobile Client (e.g., SSH, HTTP, etc.)<br>
+
+</details>
+
+## Additional Notes:<br>
+* All versions are self-contained with bundled dependencies — ready to use out of the box.<br>
+* The system will automatically purge "zombie accounts" that have been unused for 30+ days.<br>
+* Android client required permissions:<br>
+>> 1. Background execution permission (the app will disconnect when backgrounded if not granted)<br>
+>> 2. Network access permission (basic permission)<br>
+* Phone settings (Android):<br>
+>> 1. Settings → Wireless & Networks → WLAN → Keep connection during sleep → "Always" (otherwise the system will disconnect during sleep)<br>
+>> 2. Settings → Wireless & Networks → Mobile Network → Advanced → Always keep data connection → "Enabled"<br>
+
+<details>
+<summary>
+<mark><font size=5 color=darkred>FAQ</font></mark>
+</summary>
+
+* **Q: How to download and install the Android app?**<br>
+  >> 1. Open https://github.com/lazy-luo/smarGate/raw/master/app-release.apk in an Android browser<br>
+  >> 2. Download and install from the popup dialog<br>
+  >> The GitHub release may lag slightly behind the latest test version.<br>
+  >> Baidu Disk download link: https://pan.baidu.com/s/14Iq60kxHW711NVoCVKWySg <br>
+  >> Gitee mirror (faster access, no image display issues): https://gitee.com/lazy-luo/smarGate <br>
+  >> If needed, add WeChat: ws_lzy008 with the note "smarGate" — a technical discussion group may be formed based on interest.<br>
+* **Q: To access multiple devices on the home LAN, does each device need the server installed?**<br>
+   >> A: No. Just install the server on any one device.<br>
+* **Q: Why does the connection sometimes fail?**<br>
+   >> A: The server will automatically disconnect after 2-3 minutes of idle time. Wait about 10 seconds for automatic reconnection.<br>
+* **Q: Why can't IPv6 P2P work?**<br>
+   >> A: Update both client and server to the latest version; ensure both the phone and intranet computer can obtain a global IPv6 address; ensure the firewall is not blocking (Windows); verify that both IPv6 addresses are routable; check the hosts file to ensure hostnames resolve to IPv6 addresses.<br>
+* **Q: Why are there no UDP ports for IPv4 and IPv6 P2P connections?**<br>
+   >> A: smarGate uses TCP protocol for P2P tunneling, providing better security and connection reliability.<br>
+* **Q: Why can't the mobile NAS client log in?**<br>
+   >> A: Ensure that localhost (127.0.0.1) is not in the mobile NAS client's IP blacklist.<br>
+* **Q: How to share a remote office's intranet machines with multiple teams?**<br>
+   >> A: Connect the phone to WiFi and have team members' computers connect to the phone's IP:PORT, directly accessing through the phone proxy. In practice, a phone priced above 2,000 yuan can support sharing among approximately 100 team members.<br>
+* **Q: Why is there no console window for the Windows server?**<br>
+   >> A: To prevent accidental closure, the new version of the Windows server runs in the background. If you need to close it, use Task Manager.<br>
+* **Q: Does P2P traffic still go through the intermediary proxy?**<br>
+   >> A: No. It's a direct peer-to-peer connection. The speed depends on the networks where your client and server are located.<br>
+* **Q: Is smarGate's background operation power-hungry?**<br>
+   >> A: After extensive testing, for occasional usage, power consumption is extremely low — comparable to any system process. For frequent background usage, overall power consumption is similar to occasional WeChat usage. Power management warnings about "frequent background refresh..." can be ignored — any background data transfer triggers these alerts; the key metric is the power consumption ranking.<br>
+* **Q: What are smarGate's connection priority rules?**<br>
+   >> A: P2P connection is preferred. When P2P is unavailable, a custom proxy connection is used. When neither is available, the official proxy connection is used.<br>
+* **Q: Can the same user log in from multiple locations?**<br>
+   >> A: Yes, multi-point login is supported, but only one client can establish P2P connections at a time. Only one server instance can run on a single machine; ensure server instance indices do not duplicate, otherwise normal operation will be affected.<br>
+* **Q: Can the server run on an Android phone?**<br>
+   >> A: Starting from v0.27, the Android app has added "Server Mode" support.<br>
+* **Q: What do the different colors on the client mean?**<br>
+   >> A: IPv4 P2P indicator:<br>
+   ![ipv4 p2p](https://github.com/lazy-luo/smarGate/blob/master/res/ipv4p2p.png)<br>
+   >> A: IPv6 P2P indicator:<br>
+   ![ipv6 p2p](https://github.com/lazy-luo/smarGate/blob/master/res/ipv6p2p.png)<br>
+   >> A: Custom route indicator:<br>
+   ![userdefineproxyer p2p](https://github.com/lazy-luo/smarGate/blob/master/res/userdefineproxyer.png)<br>
+
+</details>
+
+## Best Practices<br>
+* Recommended best practices for reference:<br>
+  1. Set the Android client to "Auto Login" to avoid the hassle of entering username/password each time;<br>
+  2. After configuration, let the Android client run in the background. Keeping it in the foreground causes periodic refreshes and the WebView control consumes power unnecessarily;<br>
+  3. Keep the server running in the background — it's safe and secure, only you can access it;<br>
+  ...Usage scenarios...<br>
+  <a href="https://cloud.tencent.com/developer/article/1926888">[Home Camera P2P Direct Connection]</a><br>
+
+## Disclaimer<br>
+* Please read the following disclaimer carefully. By using the smarGate software tool, you indicate your acceptance of the following:<br>
+  1. It is strictly prohibited to use this software for computer hacking or any other activities that compromise computer network security;<br>
+  2. This software is a legitimate network access tool. Please use it reasonably and lawfully; do not use it for activities that violate laws, ethics, or the interests of others. If used for illegal purposes, the resulting adverse consequences shall be borne by the user; the developer of this software assumes no responsibility or liability for any losses.<br>
+
+## Donation
+If you find smarGate helpful, donations are welcome to support the long-term development of the project!<br>
+PS: It is recommended to include your registered username with the donation.<br>
+<details>
+<summary>
+<mark><font size=5 color=darkred>WeChat Donation</font></mark>
+</summary>
+<img src="https://github.com/lazy-luo/smarGate/blob/master/res/donation.png"/>
+</details>
+
+## Appendix<br>
+<details>
+<summary>
+<mark><font size=5 color=darkred>Changelog</font></mark>
+</summary>
+
+### 2026-07-24 — Updated to v0.41.1<br>
+1. Added three new service display layouts, switchable via the top toolbar with one click:<br>
+- **Card Mode**: Classic card view — service information at a glance
+- **Tab Mode**: Horizontal scrolling tab bar at the top, grouped by access point, with scroll position auto-memorized
+- **Compact Mode**: Compressed list view, click to expand details — ideal for managing large numbers of services
+
+2. Theme selection support; layout preference automatically persisted (localStorage), restored on next launch<br>
+3. Network engine optimization — improved performance and stability<br>
+4. Added multi-language support for Persian, Korean, and Russian<br>
+5. Version updated to v0.41.1<br>
+
+### 2026-03-03 — Updated to v0.40.6<br>
+1. Fixed TCP connection delayed disconnect issue<br>
+2. Tuned the network engine for improved performance<br>
+3. Version updated to v0.40.6<br>
+
+### 2025-09-26 — Updated to v0.40.5<br>
+1. Fixed a bug where connections would intermittently drop in proxy mode<br>
+2. Enhanced stability and improved performance<br>
+3. Added auto-start scripts. Usage:<br>
+* Windows
+```
+On Windows, ensure enable_autostart.bat and enable_autostart.ps1 are in the same directory as the server executable.
+Open a cmd window and run:
+enable_autostart.bat on    → enable auto-start
+enable_autostart.bat off   → disable auto-start
+The script requires administrator privileges.
+```
+* Linux/macOS
+```
+Ensure enable_autostart.sh is in the same directory as the server executable.
+enable_autostart.sh on     → enable auto-start
+enable_autostart.sh off    → disable auto-start
+```
+4. Version updated to v0.40.5<br>
+
+### 2025-03-25<br>
+1. File management now supports deleting empty directories<br>
+2. Server-to-server connections now connect on demand (retry once within 20 seconds)<br>
+3. Enhanced stability — fixed unexpected exit issues<br>
+
+### 2024-10-12 — Updated to v0.40.4:<br>
+1. Added PROXY protocol — single port supports both SOCKS5 and HTTP proxy<br>
+2. Added HTTP proxy username/password authentication<br>
+```
+<app-parameter>
+    ...
+    <httpx-user value="user" />
+    <httpx-passwd value="pwd" />
+    <socks-user value="user" />
+    <socks-passwd value="pwd" />
+    ...
+</app-parameter>
+```
+3. Other optimizations<br>
+
+### 2024-08-20<br>
+1. Improved file transfer speed<br>
+2. Other optimizations<br>
+
+### 2024-08-17<br>
+1. Fixed a bug where the server would be lost for extended periods when the network egress changed<br>
+2. Improved P2P connection mechanism — increased P2P connection success rate<br>
+
+### 2024-08-06 — Updated to v0.40.3<br>
+1. Fixed an intermittent proxy connection drop bug on Windows<br>
+2. Fixed a high CPU usage bug on Windows under low bandwidth<br>
+3. Server now supports dynamic resource reclamation — suitable for memory-constrained devices<br>
+4. Added build package supporting LoongArch64 architecture<br>
+5. Version updated to v0.40.3<br>
+
+### 2024-07-11<br>
+1. Fixed a bug where the proxy address was incorrectly displayed as localhost<br>
+2. Fixed an intermittent coredump bug on Windows<br>
+
+### 2024-05-11<br>
+1. Enabled asynchronous connections to prevent slow connections from blocking normal connections<br>
+2. Fixed a bug where chained proxy, SOCKS5, and HTTP proxy connections could not be released under certain conditions<br>
+
+### 2024-04-27 — Updated to v0.40.2:<br>
+1. Improved P2P connection success rate<br>
+2. Fixed some known bugs<br>
+3. Version updated to v0.40.2<br>
+
+### 2024-04-18:<br>
+1. Fixed favorites bug<br>
+2. Added service memo/note feature for easier service identification and tagging<br>
+
+### 2024-04-10:<br>
+1. VIP users now support Baidu Maps location tracking<br>
+* App server supports GPS positioning
+* Register on Baidu Maps Open Platform, apply for a "Browser" AK, then configure the AK in the SG client to use the map positioning feature
+
+2. Version updated to v0.40.1<br>
+
+### 2024-02-02:<br>
+1. App usability update — future versions will adopt an entirely new interface<br>
+2. Fixed a bug where IPv6 tunnels could not be created under certain conditions<br>
+3. App now includes a Favorites feature for a clear overview of frequently used connections<br>
+4. Version updated to v0.32.3<br>
+
+### 2023-11-28:<br>
+1. Safety protection for children and elderly — GPS positioning support to track the location of care recipients (manual authorization required)<br>
+* This feature only supports Android server<br>
+* Once coordinates are successfully obtained, latitude and longitude are automatically copied to the clipboard<br>
+
+2. Other optimizations<br>
+
+### 2023-11-17 — Updated to v0.32.2:<br>
+1. SOCKS protocol now supports username/password authentication<br>
+2. Audio recording save and playback support (VIP)<br>
+3. Version updated to v0.32.2<br>
+
+### 2023-10-25 — Updated to v0.32.1:<br>
+1. Bug fixes<br>
+2. Improved SOCKS protocol support (IPv4 TCP only)<br>
+3. Improved HTTP proxy protocol support<br>
+4. App now supports VIP feature licensing<br>
+5. Version updated to v0.32.1<br>
+
+### 2023-09-08 — Updated to v0.31.12:<br>
+1. Bug fixes<br>
+2. Experimental SOCKS protocol support (IPv4 TCP only)<br>
+3. Added built-in HTTP proxy protocol support<br>
+4. Memory reclamation (suitable for memory-constrained devices)<br>
+5. Fully asynchronous approach for improved responsiveness<br>
+6. Version updated to v0.31.12<br>
+
+### 2023-08-29 — Updated to v0.31.11:<br>
+1. File management now supports default sorting by time<br>
+2. Added macOS M1/M2 support<br>
+3. Version updated to v0.31.11<br>
+
+### 2023-06-03 — Updated to v0.31.10:<br>
+1. Network reliability optimization<br>
+2. Optimized network transmission efficiency<br>
+3. Version updated to v0.31.10<br>
+
+### 2023-03-04 — Updated to v0.31.9:<br>
+1. App server mode now includes an "Accessibility" service — users can enable it to achieve automatic restart<br>
+2. App operation optimization: added auto-fill on click for easier configuration of new entries<br>
+3. Fixed a bug where custom proxy services could not be provided when installed on MIPS routers<br>
+4. Added periodic IP refresh for custom proxy domain names on the server side (dynamic DNS)<br>
+5. Other optimizations<br>
+
+### 2022-12-14 — Updated to v0.31.8:<br>
+1. App server mode now supports custom proxy configuration and SSL encryption<br>
+2. Custom proxy server supports SSL self-signed certificate distribution<br>
+3. Other optimizations<br>
+
+### 2022-11-04 — Updated to v0.31.7:<br>
+1. Added one-click version upgrade — no manual update required<br>
+* This feature sources versions from GitHub; if updates fail, check GitHub connectivity<br>
+* Service typically restores within 10-20 seconds after updating<br>
+* Server provides an auto-update option (checks once daily), disabled by default<br>
+```
+<auto-update value="true" />
+```
+
+### 2022-10-20 — Updated to v0.31.6:<br>
+1. File management now supports file deletion<br>
+2. File management now supports resumable transfer (breakpoint resume)<br>
+3. File management now displays file timestamps<br>
+4. File management now supports disk switching on Windows<br>
+* This feature activates only when P2P or custom proxy connections are available<br>
+* Upload and download via drag-and-drop<br>
+* Double-click to open the file deletion confirmation dialog<br>
+
+### 2022-10-14 — Updated to v0.31.5:<br>
+1. Fixed a bug where custom proxy connections would fail after short-interval reconnection attempts<br>
+2. Added basic file upload/download functionality for convenient cross-location document synchronization<br>
+* This feature activates only when P2P or custom proxy connections are available<br>
+* Upload and download via drag-and-drop<br>
+
+3. Version updated to v0.31.5<br>
+
+### 2022-09-05:<br>
+1. Fixed a bug where custom proxy connections would disconnect abnormally<br>
+2. Version unchanged<br>
+
+### 2022-08-30 — Updated to v0.31.4:<br>
+1. Reduced runtime virtual memory usage<br>
+2. Routine optimizations<br>
+3. Version updated to v0.31.4<br>
+
+### 2022-08-14 — Updated to v0.31.3:<br>
+1. Fixed a bug where MIPS architecture systems could not connect to custom proxies<br>
+2. Fixed an issue with long HTTP protocol loading times<br>
+3. Version updated to v0.31.3<br>
+
+### 2022-08-06 — Updated to v0.31.2:<br>
+1. Fixed an intermittent crash bug on Windows — enhanced stability<br>
+2. Added keep-alive for P2P and custom proxy connections to minimize reconnection time windows and improve availability<br>
+3. Other usability optimizations — reduced app power consumption<br>
+4. Version updated to v0.31.2<br>
+
+### 2022-07-28 — Updated to v0.31.1:<br>
+1. Fixed a bug where server restarts under certain conditions caused mesh network configuration to become ineffective<br>
+2. Fixed a P2P negotiation bug for NAT1 servers<br>
+3. Version updated to v0.31.1<br>
+
+### 2022-07-22 — Updated to v0.31:<br>
+1. Added server-to-server port mapping — servers with public IPs can be directly accessed from the public internet (configuration via app only)
+* Configuration: In the existing mapping "Remote IP" field, use the format ip@idx (where idx is the access point index)
+* The "local port" configured this way is actually on the host of the current access point (note: NOT on the app phone)
+* The mapping takes effect only if P2P (or custom proxy) between the servers succeeds
+* Server-to-server proxy status is refreshed on the app only during P2P connections
+* After configuration, wait about 10 seconds for the actual status to appear on the app
+
+2. Version updated to v0.31<br>
+
+### 2022-06-30:<br>
+1. Fixed a bug where 32-bit big-endian machines could not proxy correctly when running the server<br>
+2. Version unchanged<br>
+
+### 2022-05-17:<br>
+1. Server now supports auto-generation of self-signed certificates (default filename: server.xxx)<br>
+  a. Configure the ssl-create-certfile option<br>
+```
+<app-parameter>
+  <ssl-create-certfile value="true" />
+...
+</app-parameter>
+```
+  b. Ensure openssl is installed<br>
+  c. Do not specify certificate files (do not configure ssl-cacert-file or ssl-privatekey-file)<br>
+
+### 2022-05-04:<br>
+1. Added RISC-V 32/64 architecture support — compiled with musl library (same as MIPS architecture)<br>
+2. Optimized network transport layer<br>
+3. Version unchanged<br>
+
+### 2022-02-07 — Updated to v0.30.4:<br>
+1. Added MIPS64el support<br>
+2. Added system icon display on the app side<br>
+3. Other optimizations<br>
+
+### 2021-11-06 — Updated to v0.30.3:<br>
+1. Fixed a bug where the app's memory usage display only showed JVM memory, excluding native memory<br>
+2. Optimized the network engine — improved stability and fairness under high concurrency<br>
+
+### 2021-10-17 — Updated to v0.30.2:<br>
+1. Custom proxy now supports SSL verification<br>
+2. P2P connections can now be configured as SSL tunnels ( **server must have certificates configured** )<br>
+```
+<app-parameter>
+  <ssl-tunnel-required value="first" /><!-- 3 values: none, first, only -->
+  ...
+</app-parameter>
+```
+3. Other optimizations<br>
+
+### 2021-09-24 — Updated to v0.30:<br>
+1. Added Android server auto-start on boot support (server mode only, requires manual authorization)<br>
+2. Android server in P2P mode now supports real-time audio (microphone permission requires manual authorization; the SG app must be open to record)<br>
+3. Other optimizations<br>
+
+### 2021-05-03 — Updated to v0.29.2:<br>
+1. Fixed an issue where the app could not exit on newer Android versions<br>
+2. Network optimization: fixed a bug that could cause network latency, further improved network transfer speed<br>
+3. Added version number display for easier client and server version management<br>
+4. Optimized app CPU usage — reduced power consumption<br>
+
+### 2021-03-05 — Updated to v0.29:<br>
+1. Fixed a server core dump issue when switching between IPv6 and IPv4 networks<br>
+2. Client now includes an "IPv4-only" network mode option — for scenarios where IPv4 P2P connection is required in an IPv6 network environment (forces P2P via IPv4)<br>
+3. Other bug fixes<br>
+Note: Due to a critical core dump issue in certain scenarios, v0.29 requires simultaneous update of both client and server.
+
+### 2020-12-13 — Updated to v0.28:<br>
+1. Custom proxy now supports token-based access control to prevent unauthorized access. Also supports access restriction list configuration (access-token must be numeric; access-restricting accepts allowed SIDs, multiple SIDs separated by ":"; access-restricting is optional).<br>
+ A. Proxy server configuration:
+ ```
+ <app-parameter>
+  <proxy-service-port value="9001"/>
+  <access-token value="nnnnn"/>
+  <access-restricting value="xxxxx"/>
+  ...
+ </app-parameter>
+ ```
+ B. Server configuration (token must match the proxy server):
+ ```
+ <channel address="x.x.x.x:9001" ssl="true" token="nnnnn" />
+```
+2. Optimized tunnel timeout disconnect mechanism (P2P tunnels and user proxy tunnels only): When connections are active and in normal condition, the client sends heartbeats at random intervals to prevent timeout disconnection.<br>
+ Scenario: During SSH sessions, the connection stays alive even with extended periods of inactivity — no more disconnection after 1-2 minutes of idling.
+
+### 2020-05-23 — Updated to v0.27:<br>
+1. Removed root permission acquisition — maintaining minimal permission requirements. Support for configuring ports below 1024 is currently not planned.<br>
+2. Since my personal Raspberry Pi was broken by my child, I had to maximize the remaining value of old phones — Android app now supports "Server Mode", allowing old phones to serve as home servers.<br>
+
+### 2020-04-30 — Updated to v0.26:<br>
+1. Fixed an issue where configured HTTP services might become unavailable when the IP changed<br>
+~~2. For rooted phones, attempted to acquire root privileges to support configuring reserved ports below 1024~~<br>
+3. Fixed an issue where absolute path execution (common in startup scripts) without the -f parameter could not locate the default configuration file<br>
+4. Server now includes an HTTP content replacement option (affects efficiency, ignores compressed data. For non-standard intranet web applications that embed IP:port in JS and return it to the browser). Default: no content filtering.<br>
+```
+    ...
+    <moudle-parameter>
+        <http-content-type-filter value="application/javascript" />
+        ...
+    <moudle-parameter/>
+    ...
+```
+5. Server now includes a designated P2P negotiation port option — default is random port<br>
+```
+    ...
+    <moudle-parameter>
+        <negotiation-port value="xxxxx" />
+        ...
+    <moudle-parameter/>
+    ...
+```
+6. Added an "Official Proxy" toggle — enabled by default. When disabled, data will never be forwarded through the official proxy.<br>
+
+### 2020-03-13:<br>
+1. Fixed a TCP-CORK bug where writable-event loss caused network latency under certain conditions<br>
+2. Improved memory pool runtime performance<br>
+3. Added -f command line parameter to specify the full path of the configuration file<br>
+4. Other optimizations — version unchanged<br>
+
+### 2020-01-18 — Updated to v0.25:<br>
+1. Fixed an HTTP proxy failure bug<br>
+2. App now displays IPv6 addresses<br>
+3. Version updated to v0.25<br>
+
+### 2019-11-30 — Updated to v0.24:<br>
+1. PeanutShell now supports UDP? Alright then — UDP port forwarding is now supported. Game streaming users can give it a try.<br>
+2. UDP over TCP mode supported<br>
+3. Other minor optimizations<br>
+
+### 2019-11-03:<br>
+1. Fixed a memory leak bug<br>
+2. Other minor optimizations — version unchanged<br>
+3. Improved P2P reconnection reliability<br>
+
+### 2019-09-30 — Updated to v0.23:<br>
+1. Fixed a high CPU usage bug on the Windows server under weak network conditions<br>
+2. Overall network transfer speed improvement<br>
+
+### 2019-09-20 — Updated to v0.22:<br>
+1. Improved P2P detection reliability<br>
+2. Fixed a Windows bug where P2P connections could not be established under certain conditions<br>
+3. Client now provides manual P2P reconnection (automatic reconnection may fail in weak network conditions; manual retry is available)
+
+### 2019-09-15:<br>
+1. Further reduced server CPU usage at low transfer rates<br>
+2. Routine optimization — version unchanged<br>
+
+### 2019-09-10 — Updated to v0.21:<br>
+1. Network performance optimization<br>
+2. Client now displays real-time network speed<br>
+
+### 2019-09-05:<br>
+1. Fixed a bug where auto-login would fail after changing the password on the client<br>
+2. Added auto-login timeout control<br>
+
+### 2019-09-01 — Updated to v0.20:<br>
+1. Optimized connection check performance (parallel asynchronous detection)<br>
+2. HTTPS-to-HTTP proxying support (client accesses via HTTP, server connects via HTTPS)<br>
+
+### 2019-08-18 — Updated to v0.19:<br>
+1. Performance optimization<br>
+2. Fixed a bug where server connections could not be reliably disconnected under certain conditions (custom routes)<br>
+3. Static compilation — no longer depends on Linux system GCC dynamic libraries; can run directly on Alpine (requires symlink creation)<br>
+4. Added mini version build support — no longer statically compiles OpenSSL; dynamically compatible with OpenSSL library versions from 0.9.8 to 1.1.1. Binary package reduced to ~1MB (placed in the dynamic directory; requires SSL library configuration).<br>
+
+### 2019-05-27 — Updated to v0.18:<br>
+1. Performance optimization<br>
+2. Added IPv6 P2P toggle mechanism: `<ipv4-tunnel-first value="false"/>` — set to "true" to disable IPv6 P2P. Default is "false"<br>
+3. Added IPv6 indicator and connection status prompts on the client<br>
+
+### 2019-05-21:<br>
+1. Fixed a bug where IPv6 could not be detected on Raspbian Jessie<br>
+
+### 2019-05-16 — Updated to v0.17:<br>
+1. Performance optimization<br>
+2. Added P2P disconnection and reconnection mechanism<br>
+
+### 2019-05-04:<br>
+1. Fixed an intermittent high CPU usage bug on the server when running with fewer than 4 threads and a private route was mounted — version unchanged<br>
+
+### 2019-04-23 — Updated to v0.16:<br>
+1. Fixed an intermittent core dump bug on the server when a private route was mounted<br>
+
+### 2019-04-16 — Updated to v0.15:<br>
+1. Fixed a bug where P2P would fail when switching between IPv4 and IPv6 networks<br>
+
+### 2019-04-15 — Updated to v0.14:<br>
+1. Fixed network switch reconnection failures<br>
+2. Engine performance optimization<br>
+3. Added IPv6 firewall traversal support (requires IPv6 support on the mobile device and the intranet server)<br>
+**[Important Notice]** v0.14 is incompatible with previous versions. Please update all components!<br>
+
+### .... Initial version v0.13<br>
+</details>
@@ -22,12 +22,12 @@ var g_languages = [
    ,"姓名"//20
    ,"联系电话"//21
    ,"邮箱"//22
-    ,"同意协议"//23
+    ,"用户协议"//23
    ,"必须填写邀请码"//24
    ,"描述"//25
    ,"基础信息"//26
-    ,"发送"//27
-    ,"接收"//28
+    ,"发送 ↑ "//27
+    ,"接收 ↓ "//28
    ,"总内存"//29
    ,"已用内存"//30
    ,"内存峰值"//31
@@ -35,14 +35,14 @@ var g_languages = [
    ,"在线"//33
    ,"离线"//34
    ,"系统状态"//35
-    ,"工作线程数"//36
-    ,"空闲线程数"//37
-    ,"最大连接数"//38
-    ,"当前连接数"//39
-    ,"待处理事件"//40
-    ,"检测线程数"//41
+    ,"工作线程"//36
+    ,"空闲线程"//37
+    ,"最大连接"//38
+    ,"当前连接"//39
+    ,"等待事件"//40
+    ,"检测线程"//41
    ,"服务集合"//42
-    ,"本地端口"//43
+    ,"本地绑定"//43
    ,"路由指向"//44
    ,"协议"//45
    ,"远程IP"//46
@@ -104,6 +104,105 @@ var g_languages = [
    ,"移动网关将保持提供服务"//102
    ,"服务启动时间"//103
    ,"暴露服务集"//104
+    ,"服务端代理"//105
+    ,"请选择文件操作："//106
+    ,"上传"//107
+    ,"下载"//108
+    ,"文件管理"//109
+    ,"文件名"//110
+    ,"大小"//111
+    ,"当前版本过低,不支持自动升级,请手动更新！"//112
+    ,"自定义代理"//113
+    ,"自定义代理 IP:port..."//114
+    ,"访问Token"//115
+    ,"代理服务器Token..."//116
+    ,"P2P加密选项" //117
+    ,"none"//118
+    ,"first"//119
+    ,"only"//120
+    ,"序列号注册成功！"//121
+    ,"序列号注册失败！"//122
+    ,"序列号注册" //123
+    ,"序列号" //124
+    ,"必须输入序列号" //125
+    ,"VIP 到期剩余时间（天）:" //126
+    ,"播放" //127
+    ,"已发送定位请求..." //128
+    ,"定位请求失败" //129
+    ,"已成功获取定位信息" //130
+    ,"请输入账号"//131
+    ,"请输入密码"//132
+    ,"账号最短为 3 个字符"//133
+    ,"密码长度至少为 6 个字符"//134
+    ,"邀请码必须输入数字，且不为0"//135
+    ,"邮箱地址格式错误"//136
+    ,"请输入邀请码"//137
+    ,"请确认密码"//138
+    ,"请输入电话号码"//139
+    ,"请输入邮箱"//140
+    ,"注册成功后，请于2小时内完成首次登录，用户名、密码请妥善保管，用户相关数据仅存储于本地。"//141
+    ,"密码两次输入不一致"//142
+    ,"设置"//143
+    ,"左滑可以打开设置"//144
+    ,"设置完成后，即时生效，你可以右滑返回"//145
+    ,"语言选择"//146
+    ,"常用设置"//147
+    ,"高级设置"//148
+    ,"操作确认"//149
+    ,"确认删除该条收藏记录？"//150
+    ,"系统免费用户"//151
+    ,"确认删除该条代理记录？"//152
+    ,"添加映射配置"//153
+    ,"注意：请仔细核对，如输入序列号错误，须等待半小时才能继续注册"//154
+    ,"下拉可以刷新"//155
+    ,"释放立即刷新"//156
+    ,"正在刷新..."//157
+    ,"提示信息"//158
+    ,"错误信息"//159
+    ,"常用收藏"//160
+    ,"为常用连接提供收藏"//161
+    ,"请输入收藏标题"//162
+    ,"加入收藏"//163
+    ,"文件传输功能只能在P2P或自定义代理生效时使用"//164
+    ,"您暂时没有此功能权限"//165
+    ,"目标文件夹"//166
+    ,"当前文件夹"//167
+    ,"任务区"//168
+    ,"可点击切换文件主机"//169
+    ,"刷新操作需要30秒间隔"//170
+    ,"操作失败，条目可能已添加" //171
+    ,"是否切换为服务端模式？"//172
+    ,"切换服务端/客户端模式后，需要重启APP才能生效！" //173
+    ,"请输入姓名"//174
+    ,"请间隔30秒后再试！"//175
+    ,"新用户注册失败！"//176
+    ,"网络太慢，数据加载超时！"//177
+    ,"确认删除当前选中文件？"//178
+    ,"确认传输当前选中文件？"//179
+    ,"玩命加载中..."//180
+    ,"请自行申请百度地图浏览器版AK。如首次使用地图，请在配置中设置AK"//181
+    ,"AK码设置"//182
+    ,"请输入百度地图浏览器版AK码"//183
+    ,"地图"//184
+    ,"描述"//185
+    ,"备注设置"//186
+    ,"请输入服务简短备注"//187
+    ,"设置[电池优化]"//188
+    ,"设置后台[无限制]"//189
+    ,"关闭应用速冻"//190
+    ,"允许后台高耗电"//191
+    ,"前往[电池优化]-[应用名称]，设置[不允许]"//192
+    ,"设置MIUI系统后台配置为[无限制]"//193
+    ,"前往[电池]-[应用名称]，关闭[后台冻结]和[检测到异常时自动优化]"//194
+    ,"前往[电池]-[后台耗电管理]-[应用名称]，设置[允许后台高耗电]"//195
+    ,"跳转设置失败"//196
+    ,"未知机型，请自行设置后台运行权限"//197
+    ,"展开"//198
+    ,"收起"//199
+    ,"浅色"//200
+    ,"深色"//201
+    ,"跟随系统"//202
+    ,"主题模式"//203
    ],
    ["English"
    , "OK" //1
@@ -123,17 +222,17 @@ var g_languages = [
    , "Password" //15
    , "Auto login" //16
    , "User registration" //17
-    , "Invitation code" //18
-    , "Confirm password" //19
+    , "Invitation NO" //18
+    , "Confirm" //19
    , "Name" //20
-    , "Contact number" //21
+    , "Phone NO" //21
    , "Mailbox" //22
-    , "Agreement of consent" //23
+    , "User Agreement" //23
    , "Invitation code must be filled in" //24
    , "Desc" //25
    , "Info" //26
-    , "SND" //27
-    , "RX" //28
+    , "SND ↑ " //27
+    , "RX ↓ " //28
    , "Tot-mem" //29
    , "Usage" //30
    , "Max-usage" //31
@@ -141,14 +240,14 @@ var g_languages = [
    , "Online" //33
    , "Offline" //34
    , "Summery" //35
-    , "Tot-threads" //36
-    , "Idle threads" //37
+    , "Workers" //36
+    , "Idles" //37
    , "Max-sockets" //38
    , "Connections" //39
-    , "Pending event" //40
-    , "Event threads" //41
+    , "Pending" //40
+    , "Products" //41
    , "Services" //42
-    , "Local port" //43
+    , "Local bind" //43
    , "Routing to" //44
    , "Protocol" //45
    , "Peer IP" //46
@@ -167,8 +266,8 @@ var g_languages = [
    , "No need specified by default..." //59
    , "The access point number must be entered and is an integer of <64" //60
    , "Change password" //61
-    , "Old password" //62
-    , "New password" //63
+    , "Older" //62
+    , "Newer" //63
    , "Congratulations: registration request is successful. Please keep your service ID properly" //64
    , "Login failed. Please verify the user name password you entered!"// 65
    , "Logging in..." //66
@@ -210,5 +309,722 @@ var g_languages = [
    , "The SmarGate will remain in service" // 102
    , "Service start time" // 103
    , "Exposed services"//104
+    , "Server Proxy"//105
+    , "Please select a file operation:"//106
+    , "upload"//107
+    , "download"//108
+    , "File Manager" //109
+    , "file name" //110
+    , "size" //111
+    , "The current version is too low to support automatic upgrade, please update manually!" //112
+    , "User proxy"//113
+    , "User proxy IP:port..."//114
+    , "Access token"//115
+    , "Token of proxy server..."//116
+    , "SSL for P2P" //117
+    , "none"//118
+    , "first"//119
+    , "only"//120
+    , "Successful license register！"//121
+    , "Fault to license register！"//122
+    , "License register" //123
+    , "License key" //124
+    , "license key must be filled" //125
+    , "VIP exp-after-days:" //126
+    , "Play" //127
+    , "Location request has been sent..." //128
+    , "Location request failed" //129
+    , "Successfully obtained location information" //130
+    , "Please enter your account"//131
+    , "Please enter password"//132
+    , "The minimum account length is 3 characters"//133
+    , "The password length should be at least 6 characters"//134
+    , "The invitation code must be entered as a number and not 0"//135
+    , "Email address format error"//136
+    , "Please enter the invitation code"//137
+    , "Please confirm password"//138
+    , "Please enter a phone number"//139
+    , "Please enter your email address"//140
+    , "After successful registration, please complete the first login within 2 hours. Please keep your username and password properly, and user related data is only stored locally."//141
+    , "The password entered twice is inconsistent"//142
+    , "Setting"//143
+    , "Left swipe to open settings"//144
+    , "After setting up, you can slide right to return"//145
+    , "Language "//146
+    , "Common Settings"//147
+    , "Advanced Setting"//148
+    , "Operate Confirm"//149
+    , "Are you sure to delete this favorite record?"//150
+    , "You are free users"//151
+    , "Confirm deleting the proxy record?"//152
+    , "Add mapping configuration" //153
+    , "Attention: Please check carefully. If you enter the wrong serial number, you will need to wait for half an hour before continuing to register"//154
+    , "Dropdown can refresh"//155
+    , "Release and refresh immediately"//156
+    , "Refreshing..."//157
+    , "Information"//158
+    , "Error"//159
+    , "Favorites"//160
+    , "Provide favorites for commonly used connections"//161
+    , "Please enter the bookmark title"//162
+    , "Add to favorites"//163
+    , "The file transfer function can only be used when P2P or custom proxies are in effect"//164
+    , "You currently do not have permission for this feature"//165
+    , "Destination Folder"//166
+    , "Current Folder"//167
+    , "Mission Area"//168
+    , "Click to switch file hosts"//169
+    , "The refresh operation requires a 30 second interval"//170
+    , "Operation failed, entry may have been added"//171
+    , "Switch to server-side mode?"//172
+    , "After switching between server/client mode, you need to restart the app to take effect!"//173
+    , "Please enter your name"//174
+    , "Please try again after a 30 second interval"//175
+    , "New user registration failed！"//176
+    , "The network is too slow, data loading timed out!"//177
+    , "Confirm deleting the currently selected file？"//178
+    , "Confirm the transfer of the currently selected file？"//179
+    , "Loading..."//180
+    , "Please apply for Baidu Map Browser version AK by yourself. If using the map for the first time, please set AK in the configuration"//181
+    , "AK code setting"//182
+    , "Enter AK code of the Baidu Map"//183
+    , "Map"//184
+    , "MEMO"//185
+    , "Notes modify"//186
+    , "Enter notes of the services"//187
+    , "Settings [Battery Optimization]"//188
+    , "Set up background [unlimited]"//189
+    , "Close application quick freeze"//190
+    , "Allow high power consumption in the background"//191
+    , "Go to [Battery Optimization]-[App Name] and set [Not Allowed]"//192
+    , "Set the MIUI system background configuration to [Unlimited]"//193
+    , "Go to [Battery]-[App Name], turn off [Background Freeze] and [Automatic Optimization when Abnormality Detected]"//194
+    , "Go to [Battery]-[Background Power Consumption Management]-[App Name] and set [Allow background high power consumption]"//195
+    , "Load setting failed"//196
+    , "Unknown model, please set background running permissions yourself"//197
+    ,"Expand"//198
+    ,"Collapse"//199
+    ,"Light"//200
+    ,"Dark"//201
+    ,"Auto"//202
+    ,"Theme"//203
+    ]
+    ,
+    ["فارسی"
+    ,"تایید"//1
+    ,"لغو"//2
+    ,"تازه‌سازی"//3
+    ,"پاک کردن"//4
+    ,"تغییر رمز"//5
+    ,"ذخیره"//6
+    ,"تغییر حالت"//7
+    ,"حذف"//8
+    ,"ورود"//9
+    ,"ثبت نام"//10
+    ,"بازگشت به ورود"//11
+    ,"SmarGate"//12
+    ,"ورود کاربر"//13
+    ,"نام کاربری"//14
+    ,"رمز عبور"//15
+    ,"ورود خودکار"//16
+    ,"ثبت نام کاربر"//17
+    ,"کد دعوت"//18
+    ,"تایید رمز"//19
+    ,"نام"//20
+    ,"شماره تماس"//21
+    ,"ایمیل"//22
+    ,"قوانین کاربری"//23
+    ,"کد دعوت الزامی است"//24
+    ,"توضیحات"//25
+    ,"اطلاعات"//26
+    ,"ارسال ↑"//27
+    ,"دریافت ↓"//28
+    ,"کل حافظه"//29
+    ,"مصرفی"//30
+    ,"حداکثر مصرف"//31
+    ,"وضعیت"//32
+    ,"آنلاین"//33
+    ,"آفلاین"//34
+    ,"خلاصه"//35
+    ,"کارگرها"//36
+    ,"آزاد"//37
+    ,"حداکثر سوکت"//38
+    ,"اتصالات"//39
+    ,"در انتظار"//40
+    ,"محصولات"//41
+    ,"سرویس‌ها"//42
+    ,"اتصال محلی"//43
+    ,"مسیریابی به"//44
+    ,"پروتکل"//45
+    ,"IP همتا"//46
+    ,"پورت همتا"//47
+    ,"سرور"//48
+    ,"پیکربندی"//49
+    ,"نماینده"//50
+    ,"پیکربندی نقطه دسترسی"//51
+    ,"شناسه نقطه"//52
+    ,"نام نقطه"//53
+    ,"توضیحات نقطه"//54
+    ,"پورت مذاکره"//55
+    ,"عددی کمتر از 64 وارد کنید..."//56
+    ,"نام گره را وارد کنید..."//57
+    ,"توضیح کوتاه وارد کنید..."//58
+    ,"به طور پیش‌فرض نیازی به تعیین نیست..."//59
+    ,"شماره نقطه دسترسی باید وارد شود و عدد صحیح کمتر از 64 باشد"//60
+    ,"تغییر رمز عبور"//61
+    ,"قدیمی"//62
+    ,"جدید"//63
+    ,"تبریک: درخواست ثبت نام موفقیت‌آمیز بود. لطفاً شناسه سرویس خود را به خوبی نگهداری کنید"//64
+    ,"ورود ناموفق. لطفاً نام کاربری و رمز عبور را بررسی کنید!"//65
+    ,"در حال ورود..."//66
+    ,"ثبت نام ناموفق. لطفاً اطلاعات را به درستی تکمیل کنید!"//67
+    ,"تغییر رمز عبور ناموفق!!"//68
+    ,"لطفاً صبر کنید..."//69
+    ,"در حال ثبت نام..."//70
+    ,"رمز عبور قدیمی الزامی است"//71
+    ,"رمز عبور نمی‌تواند خالی باشد"//72
+    ,"رمز جدید نمی‌تواند با رمز قدیمی یکسان باشد"//73
+    ,"تایید رمز عبور مطابقت ندارد"//74
+    ,"نام نقطه دسترسی نمی‌تواند خالی باشد و طول آن کمتر از 64 است"//75
+    ,"توضیح کوتاه نقطه دسترسی نمی‌تواند خالی باشد و طول آن کمتر از 64 است"//76
+    ,"کد دعوت الزامی است"//77
+    ,"نام کاربری الزامی است"//78
+    ,"رمز عبور باید تنظیم شود"//79
+    ,"تایید رمز عبور باید تنظیم شده و با رمز عبور مطابقت داشته باشد"//80
+    ,"نام مستعار الزامی است"//81
+    ,"آیا واقعاً می‌خواهید پروکسی پیکربندی شده فعلی را حذف کنید؟"//82
+    ,"در حال ورود خودکار، لطفاً صبر کنید..."//83
+    ,"شبکه در دسترس نیست، لطفاً تنظیمات شبکه را بررسی کنید"//84
+    ,"پورت"//85
+    ,"حالت سرور"//86
+    ,"نقطه دسترسی"//87
+    ,"در انتظار تشخیص"//88
+    ,"در حال تشخیص اتصال..."//89
+    ,"نسخه قدیمی"//90
+    ,"ورود ناموفق! کاربر وجود ندارد یا رمز عبور اشتباه است"//91
+    ,"رمز عبور با موفقیت تغییر کرد! لطفاً آن را به خوبی نگهداری کنید"//92
+    ,"رمز عبور با موفقیت تغییر کرد! ورود بعدی نیاز به وارد کردن رمز جدید دارد"//93
+    ,"ثبت نام ناموفق! کد دعوت اشتباه است"//94
+    ,"تغییر رمز عبور ناموفق. لطفاً بعداً دوباره تلاش کنید"//95
+    ,"خطای پیکربندی ارسال [پورت محلی باید بیشتر از 1024 باشد]"//96
+    ,"خطای پیکربندی پورت ارسال [کمتر از 65536]"//97
+    ,"خطای پیکربندی پورت راه دور، محدوده [1-65535]"//98
+    ,"خطای پیکربندی ارسال [تداخل پورت]"//99
+    ,"خطای پیکربندی ارسال [خطای ناشناخته]"//100
+    ,"پیکربندی با موفقیت تغییر کرد! در راه‌اندازی بعدی اعمال خواهد شد"//101
+    ,"SmarGate در حال ارائه سرویس باقی خواهد ماند"//102
+    ,"زمان شروع سرویس"//103
+    ,"سرویس‌های در معرض نمایش"//104
+    ,"پروکسی سرور"//105
+    ,"لطفاً عملیات فایل را انتخاب کنید:"//106
+    ,"آپلود"//107
+    ,"دانلود"//108
+    ,"مدیریت فایل"//109
+    ,"نام فایل"//110
+    ,"اندازه"//111
+    ,"نسخه فعلی برای پشتیبانی از به‌روزرسانی خودکار بسیار پایین است، لطفاً به صورت دستی به‌روزرسانی کنید!"//112
+    ,"پروکسی کاربر"//113
+    ,"IP:port پروکسی کاربر..."//114
+    ,"توکن دسترسی"//115
+    ,"توکن سرور پروکسی..."//116
+    ,"SSL برای P2P"//117
+    ,"هیچ"//118
+    ,"اول"//119
+    ,"فقط"//120
+    ,"ثبت مجوز موفقیت‌آمیز!"//121
+    ,"خطای ثبت مجوز!"//122
+    ,"ثبت مجوز"//123
+    ,"کلید مجوز"//124
+    ,"کلید مجوز باید وارد شود"//125
+    ,"VIP روزهای باقی‌مانده:"//126
+    ,"پخش"//127
+    ,"درخواست موقعیت مکانی ارسال شد..."//128
+    ,"درخواست موقعیت مکانی ناموفق بود"//129
+    ,"اطلاعات موقعیت مکانی با موفقیت دریافت شد"//130
+    ,"لطفاً حساب کاربری خود را وارد کنید"//131
+    ,"لطفاً رمز عبور را وارد کنید"//132
+    ,"حداقل طول حساب کاربری 3 کاراکتر است"//133
+    ,"طول رمز عبور باید حداقل 6 کاراکتر باشد"//134
+    ,"کد دعوت باید به صورت عدد وارد شود و صفر نباشد"//135
+    ,"خطای فرمت آدرس ایمیل"//136
+    ,"لطفاً کد دعوت را وارد کنید"//137
+    ,"لطفاً رمز عبور را تایید کنید"//138
+    ,"لطفاً شماره تلفن را وارد کنید"//139
+    ,"لطفاً ایمیل خود را وارد کنید"//140
+    ,"پس از ثبت نام موفق، لطفاً اولین ورود را ظرف 2 ساعت انجام دهید. نام کاربری و رمز عبور خود را به خوبی نگهداری کنید، داده‌های کاربری فقط به صورت محلی ذخیره می‌شوند."//141
+    ,"رمز عبور دو بار وارد شده مطابقت ندارد"//142
+    ,"تنظیمات"//143
+    ,"کشیدن به چپ برای باز کردن تنظیمات"//144
+    ,"پس از تنظیم، می‌توانید به راست بکشید تا بازگردید"//145
+    ,"انتخاب زبان"//146
+    ,"تنظیمات عمومی"//147
+    ,"تنظیمات پیشرفته"//148
+    ,"تایید عملیات"//149
+    ,"آیا از حذف این رکورد مورد علاقه اطمینان دارید؟"//150
+    ,"شما کاربر رایگان هستید"//151
+    ,"تایید حذف رکورد پروکسی؟"//152
+    ,"افزودن پیکربندی نگاشت"//153
+    ,"توجه: لطفاً به دقت بررسی کنید. اگر شماره سریال اشتباه وارد کنید، باید نیم ساعت قبل از ادامه ثبت نام صبر کنید"//154
+    ,"کشیدن به پایین برای تازه‌سازی"//155
+    ,"رها کردن برای تازه‌سازی فوری"//156
+    ,"در حال تازه‌سازی..."//157
+    ,"اطلاعات"//158
+    ,"خطا"//159
+    ,"علاقه‌مندی‌ها"//160
+    ,"ارائه علاقه‌مندی برای اتصالات پرکاربرد"//161
+    ,"لطفاً عنوان نشانک را وارد کنید"//162
+    ,"افزودن به علاقه‌مندی‌ها"//163
+    ,"عملکرد انتقال فایل فقط زمانی قابل استفاده است که P2P یا پروکسی سفارشی فعال باشد"//164
+    ,"شما در حال حاضر مجوز این ویژگی را ندارید"//165
+    ,"پوشه مقصد"//166
+    ,"پوشه فعلی"//167
+    ,"ناحیه ماموریت"//168
+    ,"برای تغییر میزبان فایل کلیک کنید"//169
+    ,"عملیات تازه‌سازی نیاز به فاصله 30 ثانیه دارد"//170
+    ,"عملیات ناموفق، ورودی ممکن است قبلاً اضافه شده باشد"//171
+    ,"آیا به حالت سرور تغییر کند؟"//172
+    ,"پس از تغییر حالت سرور/کلاینت، باید برنامه را مجدداً راه‌اندازی کنید تا اعمال شود!"//173
+    ,"لطفاً نام خود را وارد کنید"//174
+    ,"لطفاً پس از 30 ثانیه دوباره تلاش کنید"//175
+    ,"ثبت نام کاربر جدید ناموفق!"//176
+    ,"سرعت شبکه بسیار پایین است، بارگذاری داده‌ها با خطای زمان مواجه شد!"//177
+    ,"تایید حذف فایل انتخاب شده؟"//178
+    ,"تایید انتقال فایل انتخاب شده؟"//179
+    ,"در حال بارگذاری..."//180
+    ,"لطفاً کلید AK نسخه مرورگر نقشه بایدو را خودتان درخواست دهید. اگر برای اولین بار از نقشه استفاده می‌کنید، لطفاً AK را در تنظیمات وارد کنید"//181
+    ,"تنظیم کد AK"//182
+    ,"کد AK نقشه بایدو را وارد کنید"//183
+    ,"نقشه"//184
+    ,"یادداشت"//185
+    ,"ویرایش یادداشت"//186
+    ,"یادداشت سرویس را وارد کنید"//187
+    ,"تنظیمات [بهینه‌سازی باتری]"//188
+    ,"تنظیم پس‌زمینه [نامحدود]"//189
+    ,"بستن انجماد سریع برنامه"//190
+    ,"اجازه مصرف بالای باتری در پس‌زمینه"//191
+    ,"به [بهینه‌سازی باتری]-[نام برنامه] بروید و [مجاز نیست] را تنظیم کنید"//192
+    ,"پیکربندی پس‌زمینه سیستم MIUI را روی [نامحدود] تنظیم کنید"//193
+    ,"به [باتری]-[نام برنامه] بروید، [انجماد پس‌زمینه] و [بهینه‌سازی خودکار هنگام تشخیص خطا] را خاموش کنید"//194
+    ,"به [باتری]-[مدیریت مصرف پس‌زمینه]-[نام برنامه] بروید و [اجازه مصرف بالای باتری در پس‌زمینه] را تنظیم کنید"//195
+    ,"بارگذاری تنظیمات ناموفق"//196
+    ,"مدل ناشناخته، لطفاً مجوزهای اجرای پس‌زمینه را خودتان تنظیم کنید"//197
+    ,"باز کردن"//198
+    ,"جمع کردن"//199
+    ,"روشن"//200
+    ,"تاریک"//201
+    ,"خودکار"//202
+    ,"پوسته"//203
+    ]
+    ,
+    ["한국어"
+    ,"확인"//1
+    ,"취소"//2
+    ,"새로고침"//3
+    ,"지우기"//4
+    ,"비밀번호 변경"//5
+    ,"저장"//6
+    ,"모드 전환"//7
+    ,"삭제"//8
+    ,"로그인"//9
+    ,"회원가입"//10
+    ,"로그인으로 돌아가기"//11
+    ,"SmarGate"//12
+    ,"사용자 로그인"//13
+    ,"사용자 이름"//14
+    ,"비밀번호"//15
+    ,"자동 로그인"//16
+    ,"사용자 등록"//17
+    ,"초대 코드"//18
+    ,"비밀번호 확인"//19
+    ,"이름"//20
+    ,"전화번호"//21
+    ,"이메일"//22
+    ,"사용자 약관"//23
+    ,"초대 코드를 입력해야 합니다"//24
+    ,"설명"//25
+    ,"정보"//26
+    ,"전송 ↑"//27
+    ,"수신 ↓"//28
+    ,"전체 메모리"//29
+    ,"사용량"//30
+    ,"최대 사용량"//31
+    ,"상태"//32
+    ,"온라인"//33
+    ,"오프라인"//34
+    ,"요약"//35
+    ,"작업자"//36
+    ,"유휴"//37
+    ,"최대 소켓"//38
+    ,"연결"//39
+    ,"대기 중"//40
+    ,"제품"//41
+    ,"서비스"//42
+    ,"로컬 바인드"//43
+    ,"라우팅 대상"//44
+    ,"프로토콜"//45
+    ,"피어 IP"//46
+    ,"피어 포트"//47
+    ,"서버"//48
+    ,"구성"//49
+    ,"에이전트"//50
+    ,"엔드포인트 구성"//51
+    ,"엔드포인트 번호"//52
+    ,"엔드포인트 이름"//53
+    ,"엔드포인트 설명"//54
+    ,"협상 포트"//55
+    ,"64 미만의 숫자 입력..."//56
+    ,"노드 이름 입력..."//57
+    ,"간단한 설명 입력..."//58
+    ,"기본적으로 지정할 필요 없음..."//59
+    ,"액세스 포인트 번호를 입력해야 하며 64 미만의 정수여야 합니다"//60
+    ,"비밀번호 변경"//61
+    ,"이전 비밀번호"//62
+    ,"새 비밀번호"//63
+    ,"축하합니다: 등록 요청이 성공했습니다. 서비스 ID를 잘 보관하세요"//64
+    ,"로그인 실패. 사용자 이름과 비밀번호를 확인하세요!"//65
+    ,"로그인 중..."//66
+    ,"등록 실패. 정보가 올바르게 입력되었는지 확인하세요!"//67
+    ,"비밀번호 변경 실패!!"//68
+    ,"잠시 기다려 주세요..."//69
+    ,"등록 중..."//70
+    ,"이전 비밀번호를 입력해야 합니다"//71
+    ,"비밀번호는 비워둘 수 없습니다"//72
+    ,"새 비밀번호는 이전 비밀번호와 같을 수 없습니다"//73
+    ,"비밀번호 확인이 일치하지 않습니다"//74
+    ,"엔드포인트 이름은 비워둘 수 없으며 길이는 64 미만입니다"//75
+    ,"엔드포인트 간단 설명은 비워둘 수 없으며 길이는 64 미만입니다"//76
+    ,"초대 코드를 입력해야 합니다"//77
+    ,"사용자 이름을 입력해야 합니다"//78
+    ,"비밀번호를 설정해야 합니다"//79
+    ,"비밀번호 확인을 설정하고 비밀번호와 일치해야 합니다"//80
+    ,"닉네임을 입력해야 합니다"//81
+    ,"현재 구성된 프록시를 정말 삭제하시겠습니까?"//82
+    ,"자동 로그인 중입니다. 잠시 기다려 주세요..."//83
+    ,"네트워크를 사용할 수 없습니다. 네트워크 설정을 확인하세요"//84
+    ,"포트"//85
+    ,"서버 모드"//86
+    ,"엔드포인트"//87
+    ,"감지 대기 중"//88
+    ,"연결 감지 중..."//89
+    ,"이전 버전"//90
+    ,"로그인 실패! 사용자가 존재하지 않거나 비밀번호 오류"//91
+    ,"비밀번호가 성공적으로 변경되었습니다! 비밀번호를 잘 보관하세요"//92
+    ,"비밀번호가 성공적으로 변경되었습니다! 다음 로그인 시 새 비밀번호를 입력해야 합니다"//93
+    ,"등록 실패! 초대 코드 오류"//94
+    ,"비밀번호 변경 실패. 나중에 다시 시도해 주세요"//95
+    ,"전달 구성 오류 [로컬 포트는 1024보다 커야 함]"//96
+    ,"전달 포트 구성 오류 [65536 미만]"//97
+    ,"원격 포트 구성 오류, 범위 [1-65535]"//98
+    ,"전달 구성 오류 [포트 충돌]"//99
+    ,"전달 구성 오류 [알 수 없는 오류]"//100
+    ,"구성 수정 성공! 다음 재부팅 시 적용됩니다"//101
+    ,"SmarGate가 계속 서비스를 제공합니다"//102
+    ,"서비스 시작 시간"//103
+    ,"노출된 서비스"//104
+    ,"서버 프록시"//105
+    ,"파일 작업을 선택하세요:"//106
+    ,"업로드"//107
+    ,"다운로드"//108
+    ,"파일 관리자"//109
+    ,"파일 이름"//110
+    ,"크기"//111
+    ,"현재 버전이 자동 업데이트를 지원하기에 너무 낮습니다. 수동으로 업데이트하세요!"//112
+    ,"사용자 프록시"//113
+    ,"사용자 프록시 IP:port..."//114
+    ,"액세스 토큰"//115
+    ,"프록시 서버 토큰..."//116
+    ,"P2P용 SSL"//117
+    ,"없음"//118
+    ,"처음"//119
+    ,"만"//120
+    ,"라이선스 등록 성공!"//121
+    ,"라이선스 등록 실패!"//122
+    ,"라이선스 등록"//123
+    ,"라이선스 키"//124
+    ,"라이선스 키를 입력해야 합니다"//125
+    ,"VIP 남은 일수:"//126
+    ,"재생"//127
+    ,"위치 요청이 전송되었습니다..."//128
+    ,"위치 요청 실패"//129
+    ,"위치 정보를 성공적으로 가져왔습니다"//130
+    ,"계정을 입력하세요"//131
+    ,"비밀번호를 입력하세요"//132
+    ,"계정 최소 길이는 3자입니다"//133
+    ,"비밀번호 길이는 최소 6자 이상이어야 합니다"//134
+    ,"초대 코드는 숫자로 입력해야 하며 0이 아니어야 합니다"//135
+    ,"이메일 주소 형식 오류"//136
+    ,"초대 코드를 입력하세요"//137
+    ,"비밀번호를 확인하세요"//138
+    ,"전화번호를 입력하세요"//139
+    ,"이메일을 입력하세요"//140
+    ,"등록 성공 후 2시간 이내에 첫 로그인을 완료하세요. 사용자 이름과 비밀번호를 잘 보관하세요. 사용자 데이터는 로컬에만 저장됩니다."//141
+    ,"두 번 입력한 비밀번호가 일치하지 않습니다"//142
+    ,"설정"//143
+    ,"왼쪽으로 밀어 설정 열기"//144
+    ,"설정 후 오른쪽으로 밀어 돌아가기"//145
+    ,"언어 선택"//146
+    ,"일반 설정"//147
+    ,"고급 설정"//148
+    ,"작업 확인"//149
+    ,"이 즐겨찾기 기록을 삭제하시겠습니까?"//150
+    ,"무료 사용자입니다"//151
+    ,"프록시 기록을 삭제하시겠습니까?"//152
+    ,"매핑 구성 추가"//153
+    ,"주의: 신중하게 확인하세요. 잘못된 일련번호를 입력하면 등록을 계속하기 전에 30분을 기다려야 합니다"//154
+    ,"아래로 당겨 새로고침"//155
+    ,"놓아서 즉시 새로고침"//156
+    ,"새로고침 중..."//157
+    ,"정보"//158
+    ,"오류"//159
+    ,"즐겨찾기"//160
+    ,"자주 사용하는 연결을 즐겨찾기에 추가"//161
+    ,"북마크 제목을 입력하세요"//162
+    ,"즐겨찾기에 추가"//163
+    ,"파일 전송 기능은 P2P 또는 사용자 정의 프록시가 활성화된 경우에만 사용할 수 있습니다"//164
+    ,"현재 이 기능에 대한 권한이 없습니다"//165
+    ,"대상 폴더"//166
+    ,"현재 폴더"//167
+    ,"작업 영역"//168
+    ,"클릭하여 파일 호스트 전환"//169
+    ,"새로고침 작업은 30초 간격이 필요합니다"//170
+    ,"작업 실패, 항목이 이미 추가되었을 수 있습니다"//171
+    ,"서버 모드로 전환하시겠습니까?"//172
+    ,"서버/클라이언트 모드 전환 후 앱을 재시작해야 적용됩니다!"//173
+    ,"이름을 입력하세요"//174
+    ,"30초 후에 다시 시도하세요"//175
+    ,"새 사용자 등록 실패!"//176
+    ,"네트워크가 너무 느립니다. 데이터 로딩 시간 초과!"//177
+    ,"선택한 파일을 삭제하시겠습니까?"//178
+    ,"선택한 파일을 전송하시겠습니까?"//179
+    ,"로딩 중..."//180
+    ,"바이두 지도 브라우저 버전 AK를 직접 신청하세요. 처음 지도를 사용하는 경우 구성에서 AK를 설정하세요"//181
+    ,"AK 코드 설정"//182
+    ,"바이두 지도의 AK 코드 입력"//183
+    ,"지도"//184
+    ,"메모"//185
+    ,"메모 수정"//186
+    ,"서비스 메모 입력"//187
+    ,"설정 [배터리 최적화]"//188
+    ,"백그라운드 [무제한] 설정"//189
+    ,"앱 빠른 동결 닫기"//190
+    ,"백그라운드 높은 전력 소비 허용"//191
+    ,"[배터리 최적화]-[앱 이름]으로 이동하여 [허용 안 함] 설정"//192
+    ,"MIUI 시스템 백그라운드 구성을 [무제한]으로 설정"//193
+    ,"[배터리]-[앱 이름]으로 이동하여 [백그라운드 동결] 및 [이상 감지 시 자동 최적화] 끄기"//194
+    ,"[배터리]-[백그라운드 전력 관리]-[앱 이름]으로 이동하여 [백그라운드 높은 전력 소비 허용] 설정"//195
+    ,"설정 로드 실패"//196
+    ,"알 수 없는 모델입니다. 백그라운드 실행 권한을 직접 설정하세요"//197
+    ,"펼치기"//198
+    ,"접기"//199
+    ,"라이트"//200
+    ,"다크"//201
+    ,"자동"//202
+    ,"테마"//203
+    ]
+    ,
+    ["Русский"
+    ,"ОК"//1
+    ,"Отмена"//2
+    ,"Обновить"//3
+    ,"Очистить"//4
+    ,"Сменить пароль"//5
+    ,"Сохранить"//6
+    ,"Сменить режим"//7
+    ,"Удалить"//8
+    ,"Вход"//9
+    ,"Регистрация"//10
+    ,"Вернуться ко входу"//11
+    ,"SmarGate"//12
+    ,"Вход пользователя"//13
+    ,"Имя пользователя"//14
+    ,"Пароль"//15
+    ,"Автовход"//16
+    ,"Регистрация пользователя"//17
+    ,"Код приглашения"//18
+    ,"Подтверждение"//19
+    ,"Имя"//20
+    ,"Телефон"//21
+    ,"Эл. почта"//22
+    ,"Соглашение"//23
+    ,"Необходимо ввести код приглашения"//24
+    ,"Описание"//25
+    ,"Информация"//26
+    ,"Отправлено ↑"//27
+    ,"Получено ↓"//28
+    ,"Всего памяти"//29
+    ,"Использовано"//30
+    ,"Макс. использование"//31
+    ,"Статус"//32
+    ,"Онлайн"//33
+    ,"Офлайн"//34
+    ,"Сводка"//35
+    ,"Рабочие потоки"//36
+    ,"Простаивающие"//37
+    ,"Макс. сокетов"//38
+    ,"Подключений"//39
+    ,"Ожидание"//40
+    ,"Продукты"//41
+    ,"Сервисы"//42
+    ,"Локальный бинд"//43
+    ,"Маршрут к"//44
+    ,"Протокол"//45
+    ,"IP узла"//46
+    ,"Порт узла"//47
+    ,"Сервер"//48
+    ,"Настроить"//49
+    ,"Агент"//50
+    ,"Конфигурация точки доступа"//51
+    ,"Индекс точки"//52
+    ,"Имя точки"//53
+    ,"Описание точки"//54
+    ,"Порт согласования"//55
+    ,"Введите число менее 64..."//56
+    ,"Введите имя узла..."//57
+    ,"Введите краткое описание..."//58
+    ,"По умолчанию не требуется..."//59
+    ,"Необходимо ввести номер точки доступа — целое число <64"//60
+    ,"Смена пароля"//61
+    ,"Старый"//62
+    ,"Новый"//63
+    ,"Поздравляем: запрос на регистрацию успешен. Сохраните ваш ID сервиса"//64
+    ,"Ошибка входа. Проверьте имя пользователя и пароль!"//65
+    ,"Вход..."//66
+    ,"Ошибка регистрации. Проверьте правильность заполнения данных!"//67
+    ,"Ошибка смены пароля!!"//68
+    ,"Пожалуйста, подождите..."//69
+    ,"Регистрация..."//70
+    ,"Необходимо ввести старый пароль"//71
+    ,"Пароль не может быть пустым"//72
+    ,"Новый пароль не должен совпадать со старым"//73
+    ,"Подтверждение пароля не совпадает"//74
+    ,"Имя точки доступа не может быть пустым, длина <64"//75
+    ,"Краткое описание точки не может быть пустым, длина <64"//76
+    ,"Необходимо ввести код приглашения"//77
+    ,"Необходимо ввести имя пользователя"//78
+    ,"Необходимо задать пароль"//79
+    ,"Необходимо задать подтверждение пароля, совпадающее с паролем"//80
+    ,"Необходимо ввести псевдоним"//81
+    ,"Вы действительно хотите удалить текущий настроенный прокси?"//82
+    ,"Выполняется автоматический вход, подождите..."//83
+    ,"Сеть недоступна, проверьте настройки сети"//84
+    ,"Порт"//85
+    ,"Режим сервера"//86
+    ,"Точка доступа"//87
+    ,"Ожидание обнаружения"//88
+    ,"Обнаружение соединения..."//89
+    ,"Старая версия"//90
+    ,"Ошибка входа! Пользователь не существует или неверный пароль"//91
+    ,"Пароль успешно изменён! Храните его в безопасности"//92
+    ,"Пароль успешно изменён! При следующем входе потребуется новый пароль"//93
+    ,"Ошибка регистрации! Неверный код приглашения"//94
+    ,"Ошибка смены пароля. Попробуйте позже"//95
+    ,"Ошибка конфигурации пересылки [локальный порт должен быть >1024]"//96
+    ,"Ошибка конфигурации порта пересылки [менее 65536]"//97
+    ,"Ошибка конфигурации удалённого порта, диапазон [1-65535]"//98
+    ,"Ошибка конфигурации пересылки [конфликт портов]"//99
+    ,"Ошибка конфигурации пересылки [неизвестная ошибка]"//100
+    ,"Конфигурация успешно изменена! Вступит в силу при следующем перезапуске"//101
+    ,"SmarGate продолжит предоставление услуг"//102
+    ,"Время запуска сервиса"//103
+    ,"Открытые сервисы"//104
+    ,"Серверный прокси"//105
+    ,"Выберите операцию с файлом:"//106
+    ,"Загрузить"//107
+    ,"Скачать"//108
+    ,"Файловый менеджер"//109
+    ,"Имя файла"//110
+    ,"Размер"//111
+    ,"Текущая версия слишком стара для автоматического обновления, обновите вручную!"//112
+    ,"Пользовательский прокси"//113
+    ,"Пользовательский прокси IP:port..."//114
+    ,"Токен доступа"//115
+    ,"Токен прокси-сервера..."//116
+    ,"SSL для P2P"//117
+    ,"нет"//118
+    ,"первый"//119
+    ,"только"//120
+    ,"Лицензия успешно зарегистрирована!"//121
+    ,"Ошибка регистрации лицензии!"//122
+    ,"Регистрация лицензии"//123
+    ,"Лицензионный ключ"//124
+    ,"Необходимо ввести лицензионный ключ"//125
+    ,"VIP осталось дней:"//126
+    ,"Воспроизвести"//127
+    ,"Запрос местоположения отправлен..."//128
+    ,"Ошибка запроса местоположения"//129
+    ,"Местоположение успешно получено"//130
+    ,"Введите аккаунт"//131
+    ,"Введите пароль"//132
+    ,"Минимальная длина аккаунта — 3 символа"//133
+    ,"Длина пароля должна быть не менее 6 символов"//134
+    ,"Код приглашения должен быть числом и не равен 0"//135
+    ,"Неверный формат эл. почты"//136
+    ,"Введите код приглашения"//137
+    ,"Подтвердите пароль"//138
+    ,"Введите номер телефона"//139
+    ,"Введите эл. почту"//140
+    ,"После успешной регистрации выполните первый вход в течение 2 часов. Сохраните имя пользователя и пароль — данные хранятся только локально."//141
+    ,"Пароли, введённые дважды, не совпадают"//142
+    ,"Настройки"//143
+    ,"Свайп влево, чтобы открыть настройки"//144
+    ,"После настройки свайпните вправо, чтобы вернуться"//145
+    ,"Выбор языка"//146
+    ,"Общие настройки"//147
+    ,"Расширенные настройки"//148
+    ,"Подтверждение операции"//149
+    ,"Вы уверены, что хотите удалить эту запись из избранного?"//150
+    ,"Вы бесплатный пользователь"//151
+    ,"Подтвердите удаление записи прокси?"//152
+    ,"Добавить конфигурацию сопоставления"//153
+    ,"Внимание: проверьте внимательно. При неверном вводе серийного номера придётся ждать полчаса для продолжения регистрации"//154
+    ,"Потяните вниз для обновления"//155
+    ,"Отпустите для немедленного обновления"//156
+    ,"Обновление..."//157
+    ,"Информация"//158
+    ,"Ошибка"//159
+    ,"Избранное"//160
+    ,"Добавление часто используемых подключений в избранное"//161
+    ,"Введите название закладки"//162
+    ,"Добавить в избранное"//163
+    ,"Функция передачи файлов доступна только при активном P2P или пользовательском прокси"//164
+    ,"У вас нет прав на эту функцию"//165
+    ,"Целевая папка"//166
+    ,"Текущая папка"//167
+    ,"Область задач"//168
+    ,"Нажмите для переключения файлового хоста"//169
+    ,"Операция обновления требует интервала в 30 секунд"//170
+    ,"Операция не удалась, запись, возможно, уже добавлена"//171
+    ,"Переключиться в режим сервера?"//172
+    ,"После переключения режима сервер/клиент необходимо перезапустить приложение!"//173
+    ,"Введите ваше имя"//174
+    ,"Повторите попытку через 30 секунд"//175
+    ,"Ошибка регистрации нового пользователя!"//176
+    ,"Сеть слишком медленная, время загрузки данных истекло!"//177
+    ,"Подтвердите удаление выбранного файла?"//178
+    ,"Подтвердите передачу выбранного файла?"//179
+    ,"Загрузка..."//180
+    ,"Пожалуйста, самостоятельно запросите AK для браузерной версии Baidu Maps. При первом использовании карты укажите AK в настройках"//181
+    ,"Настройка кода AK"//182
+    ,"Введите код AK Baidu Maps"//183
+    ,"Карта"//184
+    ,"Памятка"//185
+    ,"Изменить памятку"//186
+    ,"Введите краткую заметку о сервисе"//187
+    ,"Настройки [Оптимизация батареи]"//188
+    ,"Установить фон [Без ограничений]"//189
+    ,"Отключить быструю заморозку приложения"//190
+    ,"Разрешить высокое энергопотребление в фоне"//191
+    ,"Перейдите в [Оптимизация батареи]-[Имя приложения] и установите [Запрещено]"//192
+    ,"Установите фоновую конфигурацию MIUI в [Без ограничений]"//193
+    ,"Перейдите в [Батарея]-[Имя приложения], отключите [Фоновую заморозку] и [Автооптимизацию при обнаружении аномалий]"//194
+    ,"Перейдите в [Батарея]-[Управление фоновым энергопотреблением]-[Имя приложения] и установите [Разрешить высокое фоновое энергопотребление]"//195
+    ,"Ошибка загрузки настроек"//196
+    ,"Неизвестная модель, настройте разрешения фонового выполнения самостоятельно"//197
+    ,"Развернуть"//198
+    ,"Свернуть"//199
+    ,"Светлая"//200
+    ,"Тёмная"//201
+    ,"Авто"//202
+    ,"Тема"//203
    ]
  ];
@@ -1,7 +1,73 @@
-# 中文 | [English](https://github.com/lazy-luo/smarGate/blob/master/README_en.md)
-# 快速概览<a href=https://github.com/lazy-luo/smarGate/wiki/快速上手手册>【快速上手手册】</a> <a href="https://b23.tv/nm52P5Q">【三方视频教学- B站】</a><br>
-* 平台适配，支持linux、windows、macos、android、（tob，小型机：hp-unix、solaris、AIX）<br>
-* cpu架构，支持x86、arm、mips、riscv（tob：alpha、PowerPC、SPRAC）<br>
+# samrGate（SG） 中文 | [English](https://github.com/lazy-luo/smarGate/blob/master/README_en.md)
+
+## SG是什么？
+* 是个跨网段远程端口映射工具
+  * 支持内网到内网、内网到外网映射
+* 是个随身携带可灵活控制访问入口的工具
+  * 所有配置操作都在app客户端，一眼看全、高度安全可控
+  * 访问入口既可配置到app所在手机上，也能配置到任意SG服务端电脑上
+* 是个简单的远程文件管理工具
+  * 可对手机及服务端所在服务器进行文件管理操作
+* 是个简单的socks代理工具
+* 是个简单的http(s)代理工具
+* ......
+
+## SG有什么特点？
+* 所有映射都通过app客户端进行配置，服务端运行时免配置
+* 支持服务端到APP及服务端到服务端的端口映射
+  * 可以将服务端所在内网任意机器任意端口映射到app所在手机上，通过访问手机本地端口进行穿透访问
+  * 可以通过app客户端配置，将A服务端内网任意主机任意端口映射到B服务端所在主机上
+* 支持链式代理
+* 支持多用户隔离
+* 支持ipv4/6，基于TCP进行P2P穿透
+* 支持自建代理进行数据转发
+* 支持数据隧道加密（TLS）
+* 支持自动数据隧道选择
+  * 优先P2P，次选自定义代理，官方代理兜底
+* 支持自动版本升级及APP客户端上一键升级
+* socks及http(s)代理支持自定义ip白名单及域名白名单，支持CIDR格式IP段及域名统配符
+* 支持TCP协议服务，也支持UDP协议
+  * UDP采用UDP over TCP模式
+* ......
+
+## SG能解决什么问题？
+* 无视内外网，安全访问内网资源的场景
+* 需要P2P高带宽安全传输的场景
+* 有公网IP，需要将内网服务发布出去的场景
+* ......
+  
+## SG版本说明                                                                                                      
+Android 提供 **Base** 和 **Advance** 两个构建变体（Product Flavor），共用同一代码库，通过编译时功能开关 + R8死代码消除实现差异化：
+| 功能 | Base | Advance |
+|------|:----:|:-------:|
+| 代理隧道 | ✓ | ✓ |                                                                                               
+| 文件管理 | ✓ | ✓ |                                                                                               
+| 音频采集/传输 | ✗ | ✓ |                                                                                          
+| GPS 定位追踪 | ✗ | ✓ |                                                                                           
+| 应用升级 | ✗ | ✓ |                                                                                               
+| 屏幕/摄像头监控 | ✗ | ✗ |
+
+- **Base** — 轻量版。仅保留核心代理隧道和文件管理，裁剪掉音频、定位、升级、监控等高权限/高风险功能模块。APK体积更小，权限更少，适合只需基础代理和文件访问的用户。
+- **Advance** — 完整版。包含除监控外的全部功能模块，支持远程音频、位置追踪、应用升级等高级特性。适合需要完整远程管理能力的用户。
+  * 完整版华为手机会被默认识别为“诈骗程序”，需首先关闭纯净模式，下载后设置手机为“飞行模式”后再安装。其它手机类似问题自行搜索解决办法。
+  
+## SG怎么使用？
+* 下载APP并注册
+* 下载合适的服务端版本，根据用户ID进行配置并运行
+* 登录APP进行端口映射配置
+* 使用配置的映射进行访问
+
+## 有兴趣再细看
+
+<details>
+<summary>
+	<mark><font size=3 color=darkred>查看详细</font></mark>
+</summary>
+
+# 
+## 快速概览<a href=https://github.com/lazy-luo/smarGate/wiki/快速上手手册>【快速上手手册】</a> <a href="https://www.bilibili.com/video/BV1LM411k7Rf">【三方视频教学- B站】</a><br>
+* 平台适配，支持linux、windows、macos、android（tob，小型机：hp-unix、solaris、AIX）<br>
+* cpu架构，支持x86、arm、mips、riscv、LoongArch64（tob：alpha、PowerPC、SPRAC）<br>
 * 注重安全，“内网”到“内网”的穿透，无需映射任何端口到外网，不更改任何防火墙配置<br>
 * 注重带宽，”4G手机+v6宽带“采用P2P方式访问内网服务（基于TCP协议，v4支持NAT1-3穿透）<br>
 * 注重节约，无需购买vps、无需公网IP；家中淘汰Android手机可做服务器<br>
@@ -13,7 +79,7 @@
 * 免费，测试稳定后考虑开源. <br>
 * 包含一个android客户端和需内网安装的服务端.<br>

-# APP端配置（必须）--- 无法正常使用典型情况
+## APP端配置（必须）--- 无法正常使用典型情况
 * 必须配置“允许后台运行”权限，否则切后台即被系统断连
 * 必须配置“休眠时始终保持网络连接”，否则一旦休眠则被系统断连
 * 可以配置“允许自启动”权限，否则Android服务端模式下无法开机启动（v0.30及后续版本）
@@ -163,13 +229,18 @@
 	。android手机可作为服务端
 20、支持远程文件管理功能：浏览、上传、下载、删除，支持断点续传（version >= v0.31.6）
 	。在有p2p或自定义代理时，激活文件管理功能，可对手机和服务端电脑文件进行基本操作
+21、支持内置socks5、http代理（version >= v0.32.1）
+	。毕竟有三方专业工具如ss5、squid等，因此socks5及http代理是可选的功能
+22、socks5、http代理支持域名和IP白名单（version >= v0.32.1）
+	。域名白名单支持四种模式匹配(完全匹配、向前匹配、向后匹配、中间匹配)，默认配置文件名.white_list
+	。IP白名单支持CIDR格式ip-range配置，默认配置文件名.ipchecks
 。。。待续
 	
 ```
 </details>
 	
 ## 使用指南:<br>
-<a href="https://b23.tv/nm52P5Q">三方视频教学- B站</a><br><br>
+<a href="https://www.bilibili.com/video/BV1LM411k7Rf">三方视频教学- B站</a><br><br>
 <a href="https://www.baidu.com/s?wd=smargate%20内网穿透">使用实践-度娘</a><br><br>
 <a href="https://www.google.com/search?q=smargate+内网穿透">使用实践-google</a>
 ### 1、下载app && 注册新用户
@@ -181,8 +252,7 @@
 	<mark><font size=5 color=darkred>展开图示</font></mark>
 </summary>
 <img src="https://github.com/lazy-luo/smarGate/blob/master/res/login.png" /><br>
-<img src="https://github.com/lazy-luo/smarGate/blob/master/res/register.png" /><br>
-<img src="https://github.com/lazy-luo/smarGate/blob/master/res/registerok.png" /><br>
+<img src="https://github.com/lazy-luo/smarGate/blob/master/res/reg.png" /><br>
 </details>

 ### 2、下载服务端 && 配置
@@ -229,12 +299,15 @@
 <summary>
 	<mark><font size=5 color=darkred>展开图示</font></mark>
 </summary>
-<img src="https://github.com/lazy-luo/smarGate/blob/master/res/oper2.png" /><br>
-<b>配置中的“远程ip”为“访问点”对应内网中的某台主机ip（localhost或127.0.0.1代表内网server端所在机器本身）</b>
-<img src="https://github.com/lazy-luo/smarGate/blob/master/res/oper3.png" /><br>
+<img src="https://github.com/lazy-luo/smarGate/blob/master/res/proxy.png" /><br>
+<b>服务端间端口映射配置需要在ip后加上服务端index序号，格式为：ip@idx</b>
+<img src="https://github.com/lazy-luo/smarGate/blob/master/res/server-proxy.png" /><br>
 </details>

 ### 5、电脑或手机可以直接访问手机客户端设置的服务（如ssh、http等）<br>
+
+</details>
+
 ## 补充说明:<br>
 * 所有版本已经打包了依赖，开箱即用.<br>
 * 系统将自动清除30天以上未使用的“僵尸账号”.<br>
@@ -245,6 +318,11 @@
 >> 1、设置 -> 无线及网络 -> WLAN -> 系统休眠保持连接  "允许" （否则，系统休眠会被断连）<br>
 >> 2、设置 -> 无线及网络 -> 移动网络 -> 高级 ->始终保持数据连接 "允许"<br>

+<details>
+<summary>
+	<mark><font size=5 color=darkred>常见问题答疑</font></mark>
+</summary>
+	
 * Q：如何下载安装 android app？<br>
  >> 1、用android手机浏览器打开 https://github.com/lazy-luo/smarGate/raw/master/app-release.apk <br>
  >> 2、弹出框中下载安装 <br>
@@ -283,7 +361,9 @@
   ![ipv6 p2p](https://github.com/lazy-luo/smarGate/blob/master/res/ipv6p2p.png)<br>
   >> A:自定义路由标识为：<br>
   ![userdefineproxyer p2p](https://github.com/lazy-luo/smarGate/blob/master/res/userdefineproxyer.png)<br>
-   
+
+</details>
+
 ## 最佳实践<br>  
 * 以下为推荐使用的最佳实践，供参考：<br> 
  1、android客户端设置为“自动登录”，免除每次输入用户名/密码的麻烦;<br> 
@@ -311,6 +391,148 @@ ps：捐赠建议附上注册用户名<br>
 	<mark><font size=5 color=darkred>更新历史</font></mark>
 </summary>

+### 2026-07-24更新到v0.41.1<br>                                                                    
+1、新增三种服务展示布局，顶部工具栏一键切换：<br>
+- **卡片模式（Card）**：经典卡片视图，服务信息一目了然                                           
+- **标签模式（Tab）**：顶部Tab栏横向滚动，按访问点分组切换，滚动位置自动记忆                     
+- **紧凑模式（Compact）**：列表式压缩展示，点击展开查看详情，适合大批量服务管理
+    
+2、支持主题选择，布局偏好自动持久化（localStorage），下次启动恢复上次选择<br>
+3、网络引擎优化，提示性能及稳定性<br>
+4、新增”波斯语“、“韩语”、“俄罗斯语”的多语言支持<br>
+5、版本更新到v0.41.1<br>
+
+### 2026-03-03更新到v0.40.6<br>
+1、解决tcp连接延迟断开的问题<br>
+2、调整网络引擎，提升性能<br>
+3、版本更新到v0.40.6<br>
+
+### 2025-09-26更新到v0.40.5<br>
+1、解决代理模式下连接概率性断开的BUG<br>
+2、增强稳定性，提升性能<br>
+3、增加开机自启动脚本，使用方式如下：<br>
+* windows
+```
+windows下，确保 enable_autostart.bat 和 enable_autostart.ps1 文件与服务端在同一个目录
+打开cmd窗口，开启自启动输入:
+enable_autostart.bat on
+关闭自启动输入:
+enable_autostart.bat off
+过程中要求脚本以管理员方式运行
+```
+* linux/macOS
+```
+确保 enable_autostart.sh 文件与服务端在同一个目录
+开启自启动输入:
+enable_autostart.sh on
+关闭自启动输入:
+enable_autostart.sh off
+```
+4、版本更新到v0.40.5<br>
+
+### 2025-03-25<br>
+1、文件管理新增空目录删除功能<br>
+2、服务端间连接增加使用时连接功能（20秒内重连1次）<br>
+3、增强稳定性，修复异常退出问题<br>
+
+### 2024-10-12更新到v0.40.4：<br>
+1、新增PROXY协议，单端口同时支持socks5及http代理<br>
+2、新增http代理用户/密码认证<br>
+
+```
+<app-parameter>
+	...
+	<httpx-user value="user" />
+	<httpx-passwd value="pwd" />
+	<socks-user value="user" />
+	<socks-passwd value="pwd" />
+	...
+</app-parameter>
+```
+3、其它优化<br>
+
+### 2024-08-20<br>
+1、提升文件传输速度<br>
+2、其它优化<br>
+
+### 2024-08-17<br>
+1、修复网络出口变化时服务端长时间丢失的BUG<br>
+2、改进P2P连接机制，提升P2P连接成功率<br>
+
+### 2024-08-06更新到v0.40.3<br>
+1、修复windows下代理连接偶发断开的BUG<br>
+2、修复windows下低带宽时高CPU占用的BUG<br>
+3、服务端支持动态资源回收，适合内存限制设备<br>
+4、新增编译包，支持LoongArch64架构<br>
+5、版本更新到v0.40.3<br>
+
+### 2024-07-11<br>
+1、修复代理地址错误显示为localhost的BUG<br>
+2、修复windows下偶发coredump的BUG<br>
+
+### 2024-05-11<br>
+1、启用异步连接，防止慢连接阻塞正常连接<br>
+2、修复链式代理、Socks5、http代理在特定情况下无法释放连接的BUG<br>
+
+### 2024-04-27更新到v0.40.2：<br>
+1、改进P2P的连接成功率<br>
+2、修复部分已知BUG<br>
+3、版本更新到v0.40.2<br>
+  
+### 2024-04-18：<br>
+1、收藏夹BUG修复<br>
+2、新增服务备注功能，便于服务识别及打标<br>
+  
+### 2024-04-10：<br>
+1、VIP支持百度地图定位<br>
+* APP服务端支持GPS定位
+* 百度地图开放平台，自行申请“浏览器端”AK，然后将AK配置到SG客户端中，即可正常使用地图定位功能
+  
+2、版本更新到v0.40.1<br>
+
+### 2024-02-02：<br>
+1、APP易用性更新，后续版本将采用全新界面<br>
+2、修复特定情况无法创建ipv6隧道的BUG<br>
+3、APP增加收藏夹功能，常用连接一览无余<br>
+4、版本更新到v0.32.3<br>
+
+### 2023-11-28：<br>
+1、老幼安全防护，支持GPS定位，便于掌握关怀对象所在经纬度（自行手动授权）<br>
+* 此功能仅支持Android服务端<br>
+* 坐标获取成功，则经纬度坐标将会自动复制到剪贴板<br>
+
+2、其它优化<br>
+
+### 2023-11-17更新到v0.32.2：<br>
+1、socks协议支持用户名/密码验证<br>
+2、支持保存及播放录音（VIP）<br>
+3、版本更新到v0.32.2<br>
+
+### 2023-10-25更新到v0.32.1：<br>
+1、修复bug<br>
+2、完善支持socks协议(仅支持ipv4 tcp)<br>
+3、完善支持HTTP proxy协议<br>
+4、APP支持VIP功能许可<br>
+5、版本更新到v0.32.1<br>
+
+### 2023-09-08更新到v0.31.12：<br>
+1、修复bug<br>
+2、试验性支持socks协议(仅支持ipv4 tcp)<br>
+3、新增内置支持HTTP proxy协议<br>
+4、内存回收（适用于内存限制设备）<br>
+5、全异步方式提升响应速度 <br>
+6、版本更新到v0.31.12<br>
+
+### 2023-08-29更新到v0.31.11：<br>
+1、文件管理支持默认按时间排序<br>
+2、新增macos M1/M2支持<br>
+3、版本更新到v0.31.11<br>
+
+### 2023-06-03更新到v0.31.10：<br>
+1、网络可靠性优化<br>
+2、优化网络传输效率<br>
+3、版本更新到v0.31.10<br>
+	
 ### 2023-03-04更新到v0.31.9：<br>
 1、APP服务端模式新增“无障碍”服务，用户自行打开,实现自动重启<br>
 2、APP端操作优化：新增点击操作自动填充功能，便于新增配置<br>
@@ -550,3 +772,6 @@ ps：捐赠建议附上注册用户名<br>
 【重要提示】v0.14版本将于之前版本不兼容，请务必更新版本！！！<br>
 ### ....初始版本v0.13<br>
 </details>
+
+
+