Torsten Ruger
71a7161200
redid div4 with builder
2018-08-08 12:02:24 +03:00
Torsten Ruger
c63e55c2bc
add an operator function
...
to be able to use the builder more
also add ability to load fixnums (for the int functions)
2018-08-07 20:48:36 +03:00
Torsten Ruger
595e032edf
add function_return helper to risc_value
...
create a function_return from within builder
2018-08-06 13:03:33 +03:00
Torsten Ruger
c9d8f750e5
extend type inference for dsl
...
and finally test it
2018-08-06 10:11:12 +03:00
Torsten Ruger
5346077a72
use the return jump to jump to the return sequence
...
thus every method only has one exit
should make multi return messages smaller
especially when we have escape analisis
(maybe will help with inlining too)
2018-08-02 17:36:39 +03:00
Torsten Ruger
4b4528abb2
propagate constants from block_compiler up
...
up to method_compiler, where they are collected by mom_compiler
(and included in binary)
2018-08-01 16:27:34 +03:00
Torsten Ruger
04bcfea8ce
fix scoping of blockcompiler
...
Was accessing caller scope, but must use caller's caller as the yield itself is a call.
2018-07-31 18:00:42 +03:00
Torsten Ruger
9c6a099cde
block test
...
working on return semanitcs
(still avoiding the implicit return)
2018-07-30 14:10:24 +03:00
Torsten Ruger
165036ea39
misc
2018-07-30 10:26:47 +03:00
Torsten Ruger
2dc03f8d1b
push the callable into the callable compiler
...
thus generalizing for .callable access
keep block and method aliases for destinction in derived classes
2018-07-30 10:26:11 +03:00
Torsten Ruger
285a88b59f
generalize assemblers to use callables
...
not just methods, they are almost the same anyway
2018-07-30 10:23:42 +03:00
Torsten Ruger
4055709529
push the name down into callable
...
blocks need a name too
if just for debug, and stacks
2018-07-30 10:21:43 +03:00
Torsten Ruger
1cb07a4164
block arg access was off by one
2018-07-27 12:16:06 +03:00
Torsten Ruger
e1d5592c55
fix boot to include blocks correctly
2018-07-27 10:48:45 +03:00
Torsten Ruger
f5c284b3a0
bring the blocks down to mom level
...
reusing message_setup, but adding yield specific instructions
2018-07-24 11:35:49 +03:00
Torsten Ruger
d80ef4bf4e
store method, not name, in message
...
changes the calling and thus too many test
2018-07-22 22:29:32 +03:00
Torsten Ruger
3c1137066b
more block tests reveal a compiler bug
...
copy/paste, args twice in switch
2018-07-18 10:13:19 +03:00
Torsten Ruger
ff8b95f21a
get block resolution to use the extra
...
block_compiler puts in the extra, that we get out when resolving the type
Thus block args work, though only by assuming direct call
2018-07-17 10:37:33 +03:00
Torsten Ruger
280ea8a8c4
remove resolve_to_register
...
which was, quite simply, from another era when more than message was pinned
2018-07-16 19:19:49 +03:00
Torsten Ruger
73645e1507
rename resolve_type to infer_type
...
as we go from a symbol to a type, more or less by convention
also remove the compiler from there and other not used cases
No tests change, good refactoring
2018-07-16 19:17:57 +03:00
Torsten Ruger
4cc04787e9
remove Risc.resolve_to_index
...
mostly by using better typed registers,
which cleans up the code where it was used
2018-07-16 19:00:04 +03:00
Torsten Ruger
29363e7f72
split compilers resolve_type into the three possibilities
...
cleaner code, though temporary it shifts some dirt
into the index method. up next
2018-07-16 12:03:40 +03:00
Torsten Ruger
3343017dba
move type resolution to compiler
...
from risc_value.
also unite mock compilers
2018-07-16 11:46:18 +03:00
Torsten Ruger
e3673e579c
pass extra info into register init, not just value
...
extra info may be hash, maybe just type info
2018-07-16 11:23:09 +03:00
Torsten Ruger
3bc85805a4
must pass registers to slot_to_reg and reg_to_slot
...
as they are typed, those functions don't resolve on Risc, but the register type
miscother changes from previous commits
2018-07-15 16:30:50 +03:00
Torsten Ruger
f31d22d901
use real type in register, not symbol
...
this has some more consequences, upcoming
2018-07-15 15:16:12 +03:00
Torsten Ruger
a71a6d34fb
use message reg not message
...
for upcoming change
2018-07-15 15:14:38 +03:00
Torsten Ruger
58c7294abd
finish the loop in slot_load
...
thus rewrite of that old nested if thing is done
2018-07-14 11:04:21 +03:00
Torsten Ruger
61c840c023
start to move slot_load code to register_value
...
the iea is to iterate through register_values while reducing the slot_load to a number of Slot_to_regs
wip
2018-07-13 21:56:55 +03:00
Torsten Ruger
21009b0e9b
delegate resolve to compiler when needed
...
and forgotten space test
2018-07-13 21:55:27 +03:00
Torsten Ruger
a095515b0e
new get_type_by_class_name helper for space
...
sorely needed, with 36 occurences replaced
2018-07-13 21:50:40 +03:00
Torsten Ruger
27a142f2a3
use compiler base class for blocks too
...
can now go to mom level and add
test harness still looks overly complicated, but works
first block tests at mom level
2018-07-10 22:03:32 +03:00
Torsten Ruger
a3e758357c
extract base class from method_compiler
...
to be used for blocks too
2018-07-10 22:02:11 +03:00
Torsten Ruger
edea9ac080
makeing the method of the compiler more or less private
...
in preparation for using the same code for bocks
2018-07-09 19:32:17 +03:00
Torsten Ruger
63b55f2aa4
refactor a bit for upcoming delegations
...
must get method to be private
more tell, not ask
2018-07-09 18:16:51 +03:00
Torsten Ruger
4ac89ece66
start delegating scope matters to the compiler(s)
...
slot_type_for to return the slot way to access variable
this is off course version 0.0.1 alpha, no types are checked or errors handled
2018-07-09 17:53:56 +03:00
Torsten Ruger
dd544214b3
start with block_compiler
...
as a copy of method_compiler
re-merge later, when we know what's needed
2018-07-09 16:48:23 +03:00
Torsten Ruger
0d900de695
block creation and insertion with correct types
2018-07-07 22:42:00 +03:00
Torsten Ruger
2f07cc34f3
add parfait block
2018-07-07 15:50:43 +03:00
Torsten Ruger
9005513368
rename typed_method to callable_method
...
seems to make the essence clearer
also extracted base class
2018-07-07 09:11:09 +03:00
Torsten Ruger
acd5cd8f30
rename for_type to self_type
...
and split a base class off TypedMethod
2018-07-06 20:01:17 +03:00
Torsten Ruger
d8b58d8da6
fix inital main (again)
...
stop even compiling a fake main if a real exists (in builtin)
previous version was still buggy: using builting methods types (especially locals) even comiled version had different
2018-07-04 09:17:30 +03:00
Torsten Ruger
6f936f190d
misc to_s and small fixes
2018-07-04 08:28:29 +03:00
Torsten Ruger
e099014d63
fix dunamic jump in interpreter and misc
2018-07-03 19:15:36 +03:00
Torsten Ruger
bb1d1495db
fix constant propagation through the layers
...
so they can end up in the binary
2018-07-03 10:12:22 +03:00
Torsten Ruger
56f2742e89
fix code listener logic bug
...
next's position was only updated initially
previous logic relied on pushing everything long rightly
but it wasn't right, and no harm in setting position twice,
as events only fire if there is real change
2018-07-02 23:03:00 +03:00
Torsten Ruger
a1197fb70c
interpreter tests working again
2018-07-02 17:29:26 +03:00
Torsten Ruger
6af651a886
text writer working
...
adjusted ordering as psoitioning, ie
methods in order of the assemblers of the linker
(not the object space)
2018-07-02 17:05:02 +03:00
Torsten Ruger
474cd4b348
linker and collector test work again
...
had to give space a fixed number of addresses
2018-07-02 16:19:01 +03:00
Torsten Ruger
6a4c90e2bd
fix the cpu_init for linker
...
cpu_init still translates from risc_init
but since interpreter is a platform risc_init is a private thing
and the cpu_init does not need to be lazily created, so it's done in the init
2018-07-02 15:51:50 +03:00
Torsten Ruger
1132309f6a
unify space collection attribute naming
...
currently space is still acting as a sort of memory manager.
For proper linking, all objects must be reachable from space, hence the plural versions like messages and addresses (even they are instances, it is the list that is important)
To dish out instance to use, the head must be kept, ie next_XXX for intergers, return addresses and messages
2018-07-02 15:49:51 +03:00
Torsten Ruger
07a154be70
code listener now get platform explicitly
...
used to grab it from global machine.
Now passed in from linker
tests fixed accordingly
2018-07-02 09:39:07 +03:00
Torsten Ruger
8952b39446
linker goes through assemblers, not space
...
used to traverse all methods in space
now "just" use the passed assemblers, which usually should be compiled and builtin (but for testing . . .)
tests fixed accordingly
2018-07-02 09:37:58 +03:00
Torsten Ruger
c6f0dc636d
platform helper
2018-07-02 09:36:29 +03:00
Torsten Ruger
f4b1290e58
position tests working
2018-07-02 09:35:57 +03:00
Torsten Ruger
22408b86c6
return the linker from mom_compiler
...
linker holds assemblers
assemblers come from method compilation
and so the layers come into focus
2018-07-01 21:51:48 +03:00
Torsten Ruger
5f2a256608
fix platform derivation and some tests
2018-07-01 21:27:27 +03:00
Torsten Ruger
c947c27a14
clean up booting
...
many machine boot became obsolete
or just neede parfait to boot
actual linker functionality pending
2018-07-01 14:12:42 +03:00
Torsten Ruger
e75aef933d
have to pass constants around now
...
as they are not global anymore
2018-07-01 14:11:29 +03:00
Torsten Ruger
e10092a4be
rename machine to linker
...
even work is not quite finished, but helps root out offenders
(needless to say this is wip, deep red wip)
2018-07-01 13:45:14 +03:00
Torsten Ruger
57fc67ddf6
move address list to object_space
...
where i guess it should have been from the start
2018-07-01 13:43:53 +03:00
Torsten Ruger
35b10c46a3
adds the risc instructions to the compiler
...
since they are not in the method anymore
2018-07-01 11:59:52 +03:00
Torsten Ruger
1505df894a
remove translation
...
from machine, which is quickly becoming a linker
2018-07-01 11:58:06 +03:00
Torsten Ruger
1a97408e22
return compiler, not generated mom
...
does make the tests more verbose, but the code cleaner
2018-07-01 11:57:17 +03:00
Torsten Ruger
2d83473d74
add assembler
...
getting the layers better
2018-07-01 11:53:18 +03:00
Torsten Ruger
05669065ca
back to method_compiler
...
it is what it is
2018-06-30 23:26:28 +03:00
Torsten Ruger
91a99b1239
let boot_functions return the compilers
...
methods are still added, but this is a good step to removing the risc/cpu level from the methods
2018-06-30 23:16:17 +03:00
Torsten Ruger
208b98d709
start to move translate code
2018-06-30 22:53:32 +03:00
Torsten Ruger
46d8f5002f
hoist parfait boot out of the machine boot
2018-06-30 00:39:23 +03:00
Torsten Ruger
ae35fed0ab
fix list to expand
...
prevously fixed max length list
now expanding on demand, using next
quite like binary_code, a pattern is emerging
2018-06-29 20:58:59 +03:00
Torsten Ruger
6bd01fd55f
rename method_compiler
...
in line with other compiler XX_Compiler being the compiler for that layer
remove type from compiler as it is in method available
2018-06-29 14:48:52 +03:00
Torsten Ruger
114dc95b60
move parfait boot into parfait
...
and out of risc
2018-06-29 14:36:11 +03:00
Torsten Ruger
e6f01748ff
move adapter stuff around
2018-06-29 14:26:25 +03:00
Torsten Ruger
86b1edb40c
add seperate builders
...
remove if with polymorphism for different builders
(easier to understand by naming)
2018-06-29 13:27:57 +03:00
Torsten Ruger
3dffebed3f
rename a bit
2018-06-29 13:03:19 +03:00
Torsten Ruger
d50893bb0f
rename risc_value to register_value
...
almost to register, but it still carries that value
2018-06-29 11:39:07 +03:00
Torsten Ruger
606c7bf906
remove booted flag
...
just boot if needed
2018-06-29 11:36:14 +03:00
Torsten Ruger
f1b09ac58d
move builtin boot to builtin module
2018-06-29 11:23:26 +03:00
Torsten Ruger
ce79617875
fix the exit sequence
...
was returning wrong register (1, not 0)
also saving the message for test, which changes order as the return value destroys the message
2018-06-19 19:52:06 +03:00
Torsten Ruger
5f7683efcf
pass return integer back out through exit
...
for testing of binaries later (and off course general correctness)
Some tests were using the fact that the interpreter was used, changed those to return ints rather than strings
2018-06-19 18:55:47 +03:00
Torsten Ruger
db459fcd3d
fix label loading in arm
...
was still loading the integer address
instead of the return address's address
Hello World working
2018-06-19 17:35:00 +03:00
Torsten Ruger
956c2ebe54
make arm use branch_lsteners
2018-06-19 10:51:03 +03:00
Torsten Ruger
046617f8dc
add branch listener functionaliy
...
have to store the branches and loop again as labels
dont neccessarily have positions yet
2018-06-17 22:25:38 +03:00
Torsten Ruger
3298651238
split create_binary into two phases
...
Which gives instructions a chance to check everything
and in Arms case check the constant loads/ instruction adding
So that during assembly no more change happens (and we don't have to reassemble)
2018-06-17 13:53:17 +03:00
Torsten Ruger
7543236f4f
objects didn't get positions
...
positions.empty? was wrong check
2018-06-16 10:58:54 +03:00
Torsten Ruger
698c845297
seperate position create and register
...
many test fixes
2018-06-15 22:00:49 +03:00
Torsten Ruger
9c93b38b8f
crete positions while collecting objects
...
clear two phase lifecycle for positions
always created invalid and set later
new does not auto add to cache
but create and get_or_create do
2018-06-15 21:54:21 +03:00
Torsten Ruger
2c765c8f14
rename the objects accessor
...
and move to object keys, not object_id
2018-06-15 09:18:39 +03:00
Torsten Ruger
3cc9175efa
start BranchListener
...
but on hold, since it needs positions before we have them
Must create them during collection phase
2018-06-14 21:29:34 +03:00
Torsten Ruger
5ec235d049
fixes outstanding misc, All green
...
Well. it's been a while, positioning is fixed (again)
apart from the upcoming BranchListener
2018-06-10 13:19:55 +03:00
Torsten Ruger
e1683938ed
fix label positioning bug
...
where a label at the end of a binary code resulted in the
label actually taking up a position, instead of sharing it with it's next
2018-06-10 13:18:56 +03:00
Torsten Ruger
0513cd504f
update return address in label
...
so return jumps go to the right address
2018-06-10 09:15:57 +03:00
Torsten Ruger
c7ad1d98ca
introduce the LabeListener to move instructions along when first code position changes
2018-06-09 22:13:43 +03:00
Torsten Ruger
ec1d38f5a6
reimplement instruction listeners with indexes
...
easier to understand, as indexes map to Binarycode indexes, and can thus later be used to assemble directoy into the code
Almost no change in tests (now only multiples of 4 addresses allowed)
2018-06-09 17:41:39 +03:00
Torsten Ruger
cf94227b2c
fix code init bug
...
where initial pos wasnt propagated
2018-06-09 09:16:23 +03:00
Torsten Ruger
e4b4551acf
minor simplification
2018-06-09 08:13:37 +03:00
Torsten Ruger
ad3040a846
add position_chaning to event interface
...
by reacting to the change _before it happens, we can move any BinaryCode out of the way
So when Instruction are inserted and code gets inserted, we don't need to set up the correct listener explicitly (which is tricky across mathods and changing chains), but instead just move anything that is in the way along
2018-06-09 08:10:41 +03:00
Torsten Ruger
5815d32bde
make the instructions jump over the BinaryCode end
2018-06-07 19:27:44 +03:00
Torsten Ruger
2d218bbc48
work on jump insertion continues
...
Now registering CodeListener instead of PositionListener
Also instead of on the previous, in itself, which is simpler
and allows to react to insertion at end
2018-06-07 19:26:02 +03:00
Torsten Ruger
7fa8397b56
insertion pushes, split position tests
2018-06-06 10:19:18 +03:00
Torsten Ruger
c22aff4c4f
start on insertion events and handling
2018-06-06 10:00:07 +03:00
Torsten Ruger
4789b63fcb
fix the gapping of instructions
...
so last binary stays empty and new starts at 8
2018-06-06 01:16:00 +03:00
Torsten Ruger
4ab6d62acf
small arm fixes etc
2018-06-06 00:53:41 +03:00
Torsten Ruger
d7b3368b28
fix some pesty errors
...
need to fix instruction overlap beofre interpreter starts again
2018-06-05 19:05:12 +03:00
Torsten Ruger
8d953a619f
propagate instruction positions
...
still overlapping onto binaries, but a start
2018-06-05 18:11:25 +03:00
Torsten Ruger
f35ee6425a
renaming and test fixing
2018-06-02 23:48:12 +03:00
Torsten Ruger
1d1c7105b4
introduce some helper methods
2018-06-02 23:02:59 +03:00
Torsten Ruger
c2d450f779
fold position module and object position
...
simpler that way, aslo code is moving to listners
2018-06-02 21:59:41 +03:00
Torsten Ruger
24f6e30b54
start on redoing instruction positions
...
using insruction listeners (wip)
2018-06-02 21:20:15 +03:00
Torsten Ruger
3bc35c2275
rework binary code positioning setup
...
dependency chain set up explicitly.
Next have to react to events correctly
2018-06-02 17:29:38 +03:00
Torsten Ruger
91c7903848
start simple with code listner
2018-06-02 16:34:44 +03:00
Torsten Ruger
aa6707337a
positioning wip
2018-06-02 16:12:01 +03:00
Torsten Ruger
46fbfb7101
adds the simple object dependency
...
where the next object is dependent on the previous one
and just behind it, the padded_length away
2018-05-31 20:41:04 +03:00
Torsten Ruger
21a9c56ba9
change position event code to use util
...
general purpose event fireing
can then be used for several event types
2018-05-31 19:05:53 +03:00
Torsten Ruger
2544bc5a85
move position module to folder
2018-05-31 19:01:10 +03:00
Torsten Ruger
49849939a1
little event mechanism for changed positions
2018-05-31 17:01:23 +03:00
Torsten Ruger
67100a3ef8
write adjusted address
...
and rename integer to address in label
1k hurray
2018-05-31 00:07:58 +03:00
Torsten Ruger
e39e96f646
create return address as own class to hold return addresses
...
to distinguish from integer, which does not need adjusting
2018-05-30 23:49:01 +03:00
Torsten Ruger
e86ca5ae9d
integer was wrong padded§ length
...
or rather right (2 as should be and will be)
but currently we use next AND value + type means 3, rounded 4
because we can’t swap types at compile time (as is planned at runtime,
we use next OR value)
2018-05-30 14:55:17 +03:00
Torsten Ruger
53107d3ef8
reducing the label's int for return
...
placing the raw address in the register to jump to
puts the extra instruction at the risc level (not arm), thus changing a
lot of (brittle?) tests
2018-05-30 12:54:40 +03:00
Torsten Ruger
01a2911483
using label int in interpreter
2018-05-30 11:49:29 +03:00
Torsten Ruger
0dc89c772a
get the label int to work consistently
...
still need to use it in the return
2018-05-30 10:54:18 +03:00
Torsten Ruger
074ec34659
wip, fixed some label, need more fixing
2018-05-30 10:29:38 +03:00
Torsten Ruger
c55b41afae
sort objects by class before positioning
...
since we don’t have pages yet, but want consistent layout
2018-05-29 20:52:58 +03:00
Torsten Ruger
296617cbaf
set label integer to position
2018-05-29 20:30:02 +03:00
Torsten Ruger
8322fca7b3
give labels an integer that will end up being the position at runtime
...
Since integers are first class objects, we need to use an integer object
as the return address. The actual address can not be stored in an
instance variable since it is not an object.
The address is unique to the label and never changes after positioning
(using the int is next up)
2018-05-29 20:26:00 +03:00
Torsten Ruger
4b34546c11
fixing the binary code indexes
...
AGAIN, that third of all bugs, the off by one
2018-05-28 18:20:09 +03:00
Torsten Ruger
8ef1a471a4
finally change List to derive from data object
...
can’t derive from data16 as some lists are longer
have to get the delegation to work first
2018-05-28 15:45:29 +03:00
Torsten Ruger
f9a89db10c
use fake memory
...
fix integer offset bug
(which only didn’t cause errors as fixnums are still an order too big
and the famous +1 error hit the empty space)
2018-05-28 15:09:59 +03:00
Torsten Ruger
6c06f61ab8
start on fake memory
...
get index checks on the array access of parfait
2018-05-28 14:46:26 +03:00
Torsten Ruger
be1bc63ff2
jump was written off the end of binary code, fixed
2018-05-28 11:45:04 +03:00
Torsten Ruger
c0cd1e0740
fix an issue where instruction was in wrong code
...
embarrassingly used instance variable where it should have been local
2018-05-25 19:16:13 +03:00
Torsten Ruger
6f0fad0957
dragging the extra through resets
...
as the binary the instruction is in may change when repositioning
2018-05-25 19:04:48 +03:00
Torsten Ruger
ddd408e245
trying to fix the darn jump over object header
2018-05-25 19:03:46 +03:00
Torsten Ruger
8d8cc4b016
more test fixing
...
only one bug to go
2018-05-24 21:20:56 +03:00
Torsten Ruger
183d4152d5
loading label must translate the labels too
...
(psst: like arm translator already did. duh)
2018-05-24 19:20:06 +03:00
Torsten Ruger
dae8e88b7a
recurring bug, don't save label positions
...
labels are ethereal, no length, so they don’t get to occupy a position
2018-05-24 16:26:56 +03:00
Torsten Ruger
8d510c2e7e
getting instruction repositioning right
...
big bug hunt, involving complicated maths (%)
2018-05-24 14:27:53 +03:00
Torsten Ruger
0293320bb8
use a constant for the binary code offset
...
where the instructions start
2018-05-23 21:35:22 +03:00
Torsten Ruger
8ca70a6835
Steamline objectPosition init
...
check for resetting on the same position with different class, which
should not happen
Ie it’s ok for an object to push another object up,
but not for an instruction to land on code
2018-05-23 21:34:49 +03:00
Torsten Ruger
f5d1090c39
no-ops really
2018-05-23 18:06:55 +03:00
Torsten Ruger
a2e7d7c469
give interpreter a clock and pc
...
where the pc, like in cpu’s is the memory position.
That is what the interpreter works on.
But for humans, the clock is a simpler way to count where the program
is at, no. of instructions executed
2018-05-23 18:05:22 +03:00
Torsten Ruger
ef2dc932ad
use positions in interpreter
2018-05-20 15:52:13 +03:00
Torsten Ruger
c0f10bb42b
fix opal error
2018-05-20 15:51:36 +03:00
Torsten Ruger
a7a62d53b2
use modified opal logger
...
logger was having bizarre format errors
copied and simplified (to get on)
2018-05-20 14:45:48 +03:00
Torsten Ruger
a350325b6b
fix function call and simple call logic
...
Before creating DynamicJump, the FunctionCall got a register for a
possible jump address. Now that is handled by DynamicJump and
FunctionCall just needs the method, from which it determines the
binaryCode address
2018-05-19 12:21:20 +03:00
Torsten Ruger
15e4533a2f
fix interpreter to use positions
...
tick from one (simulated memory) position to the next
(not from one instruction to the next)
2018-05-17 20:14:59 +03:00
Torsten Ruger
8966a50a8a
getter by position
...
extract and expand position testing
never return labels (that have the same position as their target)
2018-05-17 20:13:33 +03:00
Torsten Ruger
37d62d298e
assemble risc to it's position (not itself)
...
So in the next step the interpreter can use positions as program counter
and would be much more like the real thing
2018-05-17 09:49:01 +03:00
Torsten Ruger
49c4d170ce
make the interpreter platform
...
but still using the risc_instruction stream
2018-05-17 09:31:36 +03:00
Torsten Ruger
07ed16d765
groundwork for interpreter platform
...
especially positioning makes the previous interpreter approach to
fragile (too far off the real thing)
Interpreter should be it’s own platform (still use the risc
instructions),
get a translator and use positions
2018-05-16 21:00:14 +03:00
Torsten Ruger
ab4bc370ed
another +1 bug
2018-05-15 16:25:55 +03:00
Torsten Ruger
e237bc625a
remove unused methods
...
and a whole lot more index fixes
2018-05-14 20:50:52 +03:00
Torsten Ruger
3c00239f36
another million index fixes
2018-05-14 15:17:04 +03:00
Torsten Ruger
4a88f342d3
random checkin
...
still suffering -1 trauma
2018-05-14 12:38:44 +03:00
Torsten Ruger
4856b9891d
simplify writing binary
...
loop as should be, fixes the problem (one problem at least)
2018-05-13 18:01:45 +03:00
Torsten Ruger
39902401b9
positioning code by setting first method code
...
codes will initial (and on reset) propagate the whole chain
2018-05-13 15:28:10 +03:00
Torsten Ruger
2d901bf7b6
not wrapping the cpu initial jump anymore
...
also introduce padding after cpu_init (wip)
2018-05-12 18:36:59 +03:00
Torsten Ruger
232fe67c09
introduce platform to abstract cpu and load address
2018-05-12 18:32:10 +03:00
Torsten Ruger
776a97986d
fix instruction positioning
...
use at as at and only compute difference when needed (to determine if
there is a jump in binary)
Easier to understand that way
2018-05-11 18:36:45 +03:00
Torsten Ruger
bc1e29e4f6
seperate different Position classes into own files
...
also tests
and have Position module keep all positions
(singletons should be at module, not class level)
2018-05-10 20:56:12 +03:00
Torsten Ruger
1169fa7220
propagating binary code position on extend
2018-05-09 20:36:49 +03:00
Torsten Ruger
6a1528e75a
Fix instruction resetting
...
which happens on insert of a new instruction
2018-05-08 20:53:48 +03:00
Torsten Ruger
7ca7e92dda
remove link exception class
2018-05-08 20:22:04 +03:00
Torsten Ruger
cf06642768
start passing positions along inside the position code
2018-05-08 19:59:43 +03:00
Torsten Ruger
ce3cc72f9e
move all position setting into position
...
Position and subclasses handle the logic, external to
the classes, so it can be swapped out later
(at runtime positions can’t change)
2018-05-07 22:30:43 +03:00
Torsten Ruger
68fb9b1bdc
rename Position get/set
2018-05-06 20:04:02 +03:00
Torsten Ruger
e89c4d1ce1
pass binary that arm instruction belongs to in
...
at least to first. repositioning and stuff next
2018-05-06 19:56:36 +03:00
Torsten Ruger
415df49199
hand context into position
2018-05-06 00:34:59 +03:00
Torsten Ruger
40f4bfc287
change to position objects complete
2018-05-05 20:25:10 +03:00
Torsten Ruger
3244c7d633
add position tests
...
and refactor padding out
2018-05-05 20:11:08 +03:00
Torsten Ruger
d65a982454
start by moving positioned(module) to position(class)
2018-05-05 19:47:18 +03:00
Torsten Ruger
43d5521cfc
debugging positions
2018-05-05 19:32:01 +03:00
Torsten Ruger
d49d2665c5
reinit risc_init
...
fixes over 100 tests :-)
2018-05-01 22:36:46 +03:00
Torsten Ruger
6be28e7f55
fix (re)positioning when link exceptions are thrown
...
slow design, but sort of works
2018-05-01 19:48:11 +03:00
Torsten Ruger
1c52ab6b67
use hex for labels
...
idea was to be able to compare to positions
(but they are different positions)
2018-05-01 19:20:16 +03:00
Torsten Ruger
dd2c2cb975
fix init jump bug
...
the label for the jump was not translated correctly
call needs to go through to_cpu to create single instance
on the way init order slightly changed
2018-05-01 19:19:04 +03:00
Torsten Ruger
1acd231a33
debugging binaries, initial jump issues
2018-04-30 13:28:55 +03:00
Torsten Ruger
ec5a7f8a02
implement larger/smaller or equal
2018-04-24 19:45:58 +03:00
Torsten Ruger
7a2160e9b4
fix comparison operator
...
< implemented <=
2018-04-23 19:39:16 +03:00
Torsten Ruger
04359546b7
implement greater than
2018-04-19 22:57:31 +03:00
Torsten Ruger
be3d125b82
implement smaller than comparison
...
which is NOT an operator in the risc sense
rather a minus and a check for sign
(which _could be more efficient in arm, with conditional execution)
2018-04-19 22:41:40 +03:00
Torsten Ruger
9e21719aeb
generalise the operator handling
...
ie passing them through
implementing more
2018-04-19 22:13:52 +03:00
Torsten Ruger
3a50b7dd0e
fix mod4 name
...
really did div4
2018-04-19 10:00:55 +03:00
Torsten Ruger
8e1efa3993
fix source for exit label
2018-04-18 20:10:07 +03:00
Torsten Ruger
75d5fff611
let builder pass the source down, but inly once
2018-04-18 19:27:46 +03:00
Torsten Ruger
059ff4a868
pass a source into the builder
...
for debugging
2018-04-18 19:12:30 +03:00
Torsten Ruger
7c33f19bee
dont patch over existing string method
2018-04-16 21:24:27 +03:00
Torsten Ruger
59e6298879
first resolved call running though
...
and returning an int, as it should
just the value . . .
2018-04-08 23:45:23 +03:00
Torsten Ruger
e5d014b936
bit more regs, bit more resets
2018-04-08 22:29:08 +03:00
Torsten Ruger
33ffcf1d88
move resolve_method code from word to mom
...
rather make resolve an instruction.
Since it was coded in risc anyway, we not only save the setup and call
But also makes the mom instruction flow clearer
The method really came from not wanting to code it in risc, but with
the Builder, that is now surprisingly painless
2018-04-08 18:55:17 +03:00
Torsten Ruger
8c322329fb
fix builtin methods according to last commit
2018-04-08 18:52:17 +03:00
Torsten Ruger
9867234c38
move most code from method_compiler to builder
...
rather use builder in two ways, than sometimes compiler and sometimes
builder
Also makes it possible to reuse builtin code in mom’s to_risc, as both
use builder. The builtin code by directly adding to compiler, the mom
code not.
2018-04-08 18:51:20 +03:00
Torsten Ruger
c2860bef7a
fix interpreter operator args
...
as in binary strings words symbols will be same
2018-04-08 01:26:29 +03:00
Torsten Ruger
c30e461385
add operator to builder
...
just minus for now, easily extended
2018-04-08 01:01:24 +03:00
Torsten Ruger
5d4b9d4834
add branches to builder
2018-04-08 00:50:51 +03:00
Torsten Ruger
695ae5ad99
add label generation to builder
2018-04-08 00:39:35 +03:00
Torsten Ruger
6958fc31ab
rework resolve_method, using builder
2018-04-07 23:07:44 +03:00
Torsten Ruger
bf8e9e508b
opal hack
2018-04-07 22:35:48 +03:00
Torsten Ruger
26cf911a5c
change build names a little and document
2018-04-07 22:35:40 +03:00