41 lines
1.8 KiB
Markdown
41 lines
1.8 KiB
Markdown
[Index page](../)
|
|
|
|
## Access EDL mode
|
|
|
|
EDL (Emergency Download) mode is used in Qualcomm-based devices for unbricking/flashing purposes. EDL mode bypasses the bootloader and MiFlash can interact with it. There are several ways to access EDL mode but they usually require the bootloader to be unlocked.
|
|
|
|
**Note: EDL mode is not accessible on locked devices that were released in 2017 or later.**
|
|
|
|
### ADB/Fastboot method
|
|
|
|
1. Download and launch the Xiaomi ADB/Fastboot Tools from [here](Tools_for_Xiaomi_devices.md).
|
|
|
|
2. Connect the device in ADB or Fastboot mode. See the instructions [here](https://szaki.github.io/XiaomiADBFastbootTools/).
|
|
|
|
3. Reboot the device to EDL mode by clicking Reboot device to EDL in the top menu.
|
|
|
|
4. Upon entering EDL mode, the phone's screen should turn blank and the notification LED might also be blinking.
|
|
|
|
To exit EDL mode, hold the Power button for 5-10 seconds.
|
|
|
|
### Fastboot method for the Redmi Note 3 SD / Special Edition
|
|
|
|
1. Download and extract [this package](https://www.androidfilehost.com/?fid=24591000424940129) on your PC.
|
|
|
|
2. Enter fastboot mode by holding Power and Vol- at the same time. Wait until the Mi Bunny appears, then connect the device to the PC.
|
|
|
|
3. Run reboot.bat in the extracted package. A command prompt will appear. Press a key to reboot the device to EDL mode.
|
|
|
|
4. Upon entering EDL mode, the phone's screen should turn blank and the notification LED might also be blinking.
|
|
|
|
To exit EDL mode, hold the Power button for about 10 seconds.
|
|
|
|
### Recovery menu method for the Redmi 3/4 series
|
|
|
|
1. Enter the recovery menu by holding Power and Vol+ at the same time until recovery menu comes up.
|
|
|
|
2. In the recovery menu, select Download Mode.
|
|
|
|
3. Upon entering EDL mode, the phone's screen should turn blank and the notification LED might also be blinking.
|
|
|
|
To exit EDL mode, hold the Power button for about 10 seconds. |