remove 22
This commit is contained in:
parent
4ef0900c3b
commit
d37a57244b
|
|
@ -1,269 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||
# the files and/or settings you need.
|
||||
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||
# that you follow these steps to properly calibrate your printer:
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
# [include config/boards/btt-skr-pro-12/config.cfg]
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
#[include config/boards/btt-octopus-pro-446/config.cfg]
|
||||
#[include config/boards/btt-octopus-pro-429/config.cfg]
|
||||
#[include config/boards/fysetc-spider/config.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
# COOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
# This increases motor torque, positional accuracy and speed limits.
|
||||
# don't enable this before your printer is fully configured and you have a fan blowing on your stepper drivers.
|
||||
#[include config/printers/v-core-3/speed-limits-performance.cfg]
|
||||
#[include config/printers/v-core-3/tmc2209-performance.cfg]
|
||||
#[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.6a-*.cfg]
|
||||
|
||||
# STEALTH MODE (Enables stealthchop and limits velocity and acceleration)
|
||||
# NOTE: You still need to include one of the above stepper motor definitions.
|
||||
# NOTE: This will make your printer quiter but less accurate, it's an inherent side effect of stealthchop.
|
||||
#[include config/printers/v-core-3/speed-limits-stealth.cfg]
|
||||
#[include config/printers/v-core-3/tmc2209-stealth.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
# Inductive/Capacitive probe
|
||||
# [include config/z-probe/probe.cfg]
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
# Sensorless homing (Beware: this requires manual tinkering and does not work if your x/y stepper drivers
|
||||
# have clipped DIAG pins). It is strongly encouraged to use physical endstops if you're a beginner.
|
||||
# If you still wish to proceed, copy config/templates/sensorless-homing-tmc2209.cfg to the root directory and
|
||||
# remove the # from the line below.
|
||||
#[include sensorless-homing-tmc2209.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
# Remove the # from your printer size below.
|
||||
# Similarly add a # in front of [include config/printers/v-core-3/300.cfg] if you have a bigger machine.
|
||||
#[include config/printers/v-core-3/300.cfg]
|
||||
#[include config/printers/v-core-3/400.cfg]
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### TOOLHEAD
|
||||
### Pick your extruder and hotend
|
||||
#############################################################################################################
|
||||
# Extruder
|
||||
# [include config/extruders/bmg.cfg]
|
||||
[include config/extruders/lgx.cfg]
|
||||
#[include config/extruders/lgx-lite.cfg]
|
||||
#[include config/extruders/orbiter.cfg]
|
||||
#[include config/extruders/orbiter-1004.cfg] # Use this with the LDO-36STH20-1004AHG motor
|
||||
#[include config/extruders/hemera.cfg]
|
||||
#[include config/extruders/titan.cfg]
|
||||
|
||||
# Hotend
|
||||
# [include config/hotends/v6.cfg]
|
||||
#[include config/hotends/dragonfly.cfg]
|
||||
#[include config/hotends/rapido.cfg]
|
||||
#[include config/hotends/copperhead.cfg]
|
||||
[include config/hotends/mosquito.cfg]
|
||||
#[include config/hotends/mosquito-magnum.cfg]
|
||||
#[include config/hotends/dragon-standard-flow.cfg]
|
||||
#[include config/hotends/dragon-high-flow.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "primeline"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 300
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 0.0 # Adjust this to fit your setup
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### USER OVERRIDES
|
||||
### Anything custom you want to add, or RatOS configuration you want to override, do it here.
|
||||
#############################################################################################################
|
||||
|
||||
[bed_mesh]
|
||||
speed: 30
|
||||
horizontal_move_z: 10
|
||||
mesh_min: 15, 15
|
||||
mesh_max: 450, 450
|
||||
probe_count: 5 , 5
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 3.180
|
||||
|
|
@ -1,288 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||
# the files and/or settings you need.
|
||||
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||
# that you follow these steps to properly calibrate your printer:
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
# [include config/boards/btt-skr-pro-12/config.cfg]
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
#[include config/boards/btt-octopus-pro-446/config.cfg]
|
||||
#[include config/boards/btt-octopus-pro-429/config.cfg]
|
||||
#[include config/boards/fysetc-spider/config.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
# COOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
# This increases motor torque, positional accuracy and speed limits.
|
||||
# don't enable this before your printer is fully configured and you have a fan blowing on your stepper drivers.
|
||||
#[include config/printers/v-core-3/speed-limits-performance.cfg]
|
||||
#[include config/printers/v-core-3/tmc2209-performance.cfg]
|
||||
#[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.6a-*.cfg]
|
||||
|
||||
# STEALTH MODE (Enables stealthchop and limits velocity and acceleration)
|
||||
# NOTE: You still need to include one of the above stepper motor definitions.
|
||||
# NOTE: This will make your printer quiter but less accurate, it's an inherent side effect of stealthchop.
|
||||
#[include config/printers/v-core-3/speed-limits-stealth.cfg]
|
||||
#[include config/printers/v-core-3/tmc2209-stealth.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
# Inductive/Capacitive probe
|
||||
# [include config/z-probe/probe.cfg]
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
# Sensorless homing (Beware: this requires manual tinkering and does not work if your x/y stepper drivers
|
||||
# have clipped DIAG pins). It is strongly encouraged to use physical endstops if you're a beginner.
|
||||
# If you still wish to proceed, copy config/templates/sensorless-homing-tmc2209.cfg to the root directory and
|
||||
# remove the # from the line below.
|
||||
#[include sensorless-homing-tmc2209.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
# Remove the # from your printer size below.
|
||||
# Similarly add a # in front of [include config/printers/v-core-3/300.cfg] if you have a bigger machine.
|
||||
#[include config/printers/v-core-3/300.cfg]
|
||||
#[include config/printers/v-core-3/400.cfg]
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### TOOLHEAD
|
||||
### Pick your extruder and hotend
|
||||
#############################################################################################################
|
||||
# Extruder
|
||||
# [include config/extruders/bmg.cfg]
|
||||
[include config/extruders/lgx.cfg]
|
||||
#[include config/extruders/lgx-lite.cfg]
|
||||
#[include config/extruders/orbiter.cfg]
|
||||
#[include config/extruders/orbiter-1004.cfg] # Use this with the LDO-36STH20-1004AHG motor
|
||||
#[include config/extruders/hemera.cfg]
|
||||
#[include config/extruders/titan.cfg]
|
||||
|
||||
# Hotend
|
||||
# [include config/hotends/v6.cfg]
|
||||
#[include config/hotends/dragonfly.cfg]
|
||||
#[include config/hotends/rapido.cfg]
|
||||
#[include config/hotends/copperhead.cfg]
|
||||
[include config/hotends/mosquito.cfg]
|
||||
#[include config/hotends/mosquito-magnum.cfg]
|
||||
#[include config/hotends/dragon-standard-flow.cfg]
|
||||
#[include config/hotends/dragon-high-flow.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "primeline"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 300
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 0.0 # Adjust this to fit your setup
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### USER OVERRIDES
|
||||
### Anything custom you want to add, or RatOS configuration you want to override, do it here.
|
||||
#############################################################################################################
|
||||
|
||||
[bed_mesh]
|
||||
speed: 30
|
||||
horizontal_move_z: 10
|
||||
mesh_min: 15, 15
|
||||
mesh_max: 450, 450
|
||||
probe_count: 5 , 5
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 3.180
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,288 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||
# the files and/or settings you need.
|
||||
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||
# that you follow these steps to properly calibrate your printer:
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
# [include config/boards/btt-skr-pro-12/config.cfg]
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
#[include config/boards/btt-octopus-pro-446/config.cfg]
|
||||
#[include config/boards/btt-octopus-pro-429/config.cfg]
|
||||
#[include config/boards/fysetc-spider/config.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
# COOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
# This increases motor torque, positional accuracy and speed limits.
|
||||
# don't enable this before your printer is fully configured and you have a fan blowing on your stepper drivers.
|
||||
#[include config/printers/v-core-3/speed-limits-performance.cfg]
|
||||
#[include config/printers/v-core-3/tmc2209-performance.cfg]
|
||||
#[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.6a-*.cfg]
|
||||
|
||||
# STEALTH MODE (Enables stealthchop and limits velocity and acceleration)
|
||||
# NOTE: You still need to include one of the above stepper motor definitions.
|
||||
# NOTE: This will make your printer quiter but less accurate, it's an inherent side effect of stealthchop.
|
||||
#[include config/printers/v-core-3/speed-limits-stealth.cfg]
|
||||
#[include config/printers/v-core-3/tmc2209-stealth.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
# Inductive/Capacitive probe
|
||||
# [include config/z-probe/probe.cfg]
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
# Sensorless homing (Beware: this requires manual tinkering and does not work if your x/y stepper drivers
|
||||
# have clipped DIAG pins). It is strongly encouraged to use physical endstops if you're a beginner.
|
||||
# If you still wish to proceed, copy config/templates/sensorless-homing-tmc2209.cfg to the root directory and
|
||||
# remove the # from the line below.
|
||||
#[include sensorless-homing-tmc2209.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
# Remove the # from your printer size below.
|
||||
# Similarly add a # in front of [include config/printers/v-core-3/300.cfg] if you have a bigger machine.
|
||||
#[include config/printers/v-core-3/300.cfg]
|
||||
#[include config/printers/v-core-3/400.cfg]
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### TOOLHEAD
|
||||
### Pick your extruder and hotend
|
||||
#############################################################################################################
|
||||
# Extruder
|
||||
# [include config/extruders/bmg.cfg]
|
||||
[include config/extruders/lgx.cfg]
|
||||
#[include config/extruders/lgx-lite.cfg]
|
||||
#[include config/extruders/orbiter.cfg]
|
||||
#[include config/extruders/orbiter-1004.cfg] # Use this with the LDO-36STH20-1004AHG motor
|
||||
#[include config/extruders/hemera.cfg]
|
||||
#[include config/extruders/titan.cfg]
|
||||
|
||||
# Hotend
|
||||
# [include config/hotends/v6.cfg]
|
||||
#[include config/hotends/dragonfly.cfg]
|
||||
#[include config/hotends/rapido.cfg]
|
||||
#[include config/hotends/copperhead.cfg]
|
||||
[include config/hotends/mosquito.cfg]
|
||||
#[include config/hotends/mosquito-magnum.cfg]
|
||||
#[include config/hotends/dragon-standard-flow.cfg]
|
||||
#[include config/hotends/dragon-high-flow.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "primeline"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 300
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 0.0 # Adjust this to fit your setup
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### USER OVERRIDES
|
||||
### Anything custom you want to add, or RatOS configuration you want to override, do it here.
|
||||
#############################################################################################################
|
||||
|
||||
[bed_mesh]
|
||||
speed: 30
|
||||
horizontal_move_z: 10
|
||||
mesh_min: 15, 15
|
||||
mesh_max: 450, 450
|
||||
probe_count: 5 , 5
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 4.100
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,288 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||
# the files and/or settings you need.
|
||||
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||
# that you follow these steps to properly calibrate your printer:
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
# [include config/boards/btt-skr-pro-12/config.cfg]
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
#[include config/boards/btt-octopus-pro-446/config.cfg]
|
||||
#[include config/boards/btt-octopus-pro-429/config.cfg]
|
||||
#[include config/boards/fysetc-spider/config.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
# COOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
# This increases motor torque, positional accuracy and speed limits.
|
||||
# don't enable this before your printer is fully configured and you have a fan blowing on your stepper drivers.
|
||||
#[include config/printers/v-core-3/speed-limits-performance.cfg]
|
||||
#[include config/printers/v-core-3/tmc2209-performance.cfg]
|
||||
#[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.6a-*.cfg]
|
||||
|
||||
# STEALTH MODE (Enables stealthchop and limits velocity and acceleration)
|
||||
# NOTE: You still need to include one of the above stepper motor definitions.
|
||||
# NOTE: This will make your printer quiter but less accurate, it's an inherent side effect of stealthchop.
|
||||
#[include config/printers/v-core-3/speed-limits-stealth.cfg]
|
||||
#[include config/printers/v-core-3/tmc2209-stealth.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
# Inductive/Capacitive probe
|
||||
# [include config/z-probe/probe.cfg]
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
# Sensorless homing (Beware: this requires manual tinkering and does not work if your x/y stepper drivers
|
||||
# have clipped DIAG pins). It is strongly encouraged to use physical endstops if you're a beginner.
|
||||
# If you still wish to proceed, copy config/templates/sensorless-homing-tmc2209.cfg to the root directory and
|
||||
# remove the # from the line below.
|
||||
#[include sensorless-homing-tmc2209.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
# Remove the # from your printer size below.
|
||||
# Similarly add a # in front of [include config/printers/v-core-3/300.cfg] if you have a bigger machine.
|
||||
#[include config/printers/v-core-3/300.cfg]
|
||||
#[include config/printers/v-core-3/400.cfg]
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### TOOLHEAD
|
||||
### Pick your extruder and hotend
|
||||
#############################################################################################################
|
||||
# Extruder
|
||||
# [include config/extruders/bmg.cfg]
|
||||
[include config/extruders/lgx.cfg]
|
||||
#[include config/extruders/lgx-lite.cfg]
|
||||
#[include config/extruders/orbiter.cfg]
|
||||
#[include config/extruders/orbiter-1004.cfg] # Use this with the LDO-36STH20-1004AHG motor
|
||||
#[include config/extruders/hemera.cfg]
|
||||
#[include config/extruders/titan.cfg]
|
||||
|
||||
# Hotend
|
||||
# [include config/hotends/v6.cfg]
|
||||
#[include config/hotends/dragonfly.cfg]
|
||||
#[include config/hotends/rapido.cfg]
|
||||
#[include config/hotends/copperhead.cfg]
|
||||
[include config/hotends/mosquito.cfg]
|
||||
#[include config/hotends/mosquito-magnum.cfg]
|
||||
#[include config/hotends/dragon-standard-flow.cfg]
|
||||
#[include config/hotends/dragon-high-flow.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "primeline"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 300
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 0.0 # Adjust this to fit your setup
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### USER OVERRIDES
|
||||
### Anything custom you want to add, or RatOS configuration you want to override, do it here.
|
||||
#############################################################################################################
|
||||
|
||||
[bed_mesh]
|
||||
speed: 30
|
||||
horizontal_move_z: 10
|
||||
mesh_min: 15, 15
|
||||
mesh_max: 450, 450
|
||||
probe_count: 5 , 5
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.970
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,288 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||
# the files and/or settings you need.
|
||||
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||
# that you follow these steps to properly calibrate your printer:
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
# [include config/boards/btt-skr-pro-12/config.cfg]
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
#[include config/boards/btt-octopus-pro-446/config.cfg]
|
||||
#[include config/boards/btt-octopus-pro-429/config.cfg]
|
||||
#[include config/boards/fysetc-spider/config.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
# COOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
# This increases motor torque, positional accuracy and speed limits.
|
||||
# don't enable this before your printer is fully configured and you have a fan blowing on your stepper drivers.
|
||||
#[include config/printers/v-core-3/speed-limits-performance.cfg]
|
||||
#[include config/printers/v-core-3/tmc2209-performance.cfg]
|
||||
#[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.6a-*.cfg]
|
||||
|
||||
# STEALTH MODE (Enables stealthchop and limits velocity and acceleration)
|
||||
# NOTE: You still need to include one of the above stepper motor definitions.
|
||||
# NOTE: This will make your printer quiter but less accurate, it's an inherent side effect of stealthchop.
|
||||
#[include config/printers/v-core-3/speed-limits-stealth.cfg]
|
||||
#[include config/printers/v-core-3/tmc2209-stealth.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
# Inductive/Capacitive probe
|
||||
# [include config/z-probe/probe.cfg]
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
# Sensorless homing (Beware: this requires manual tinkering and does not work if your x/y stepper drivers
|
||||
# have clipped DIAG pins). It is strongly encouraged to use physical endstops if you're a beginner.
|
||||
# If you still wish to proceed, copy config/templates/sensorless-homing-tmc2209.cfg to the root directory and
|
||||
# remove the # from the line below.
|
||||
#[include sensorless-homing-tmc2209.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
# Remove the # from your printer size below.
|
||||
# Similarly add a # in front of [include config/printers/v-core-3/300.cfg] if you have a bigger machine.
|
||||
#[include config/printers/v-core-3/300.cfg]
|
||||
#[include config/printers/v-core-3/400.cfg]
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### TOOLHEAD
|
||||
### Pick your extruder and hotend
|
||||
#############################################################################################################
|
||||
# Extruder
|
||||
# [include config/extruders/bmg.cfg]
|
||||
[include config/extruders/lgx.cfg]
|
||||
#[include config/extruders/lgx-lite.cfg]
|
||||
#[include config/extruders/orbiter.cfg]
|
||||
#[include config/extruders/orbiter-1004.cfg] # Use this with the LDO-36STH20-1004AHG motor
|
||||
#[include config/extruders/hemera.cfg]
|
||||
#[include config/extruders/titan.cfg]
|
||||
|
||||
# Hotend
|
||||
# [include config/hotends/v6.cfg]
|
||||
#[include config/hotends/dragonfly.cfg]
|
||||
#[include config/hotends/rapido.cfg]
|
||||
#[include config/hotends/copperhead.cfg]
|
||||
[include config/hotends/mosquito.cfg]
|
||||
#[include config/hotends/mosquito-magnum.cfg]
|
||||
#[include config/hotends/dragon-standard-flow.cfg]
|
||||
#[include config/hotends/dragon-high-flow.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "primeline"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 300
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 0.0 # Adjust this to fit your setup
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### USER OVERRIDES
|
||||
### Anything custom you want to add, or RatOS configuration you want to override, do it here.
|
||||
#############################################################################################################
|
||||
|
||||
[bed_mesh]
|
||||
speed: 30
|
||||
horizontal_move_z: 10
|
||||
mesh_min: 15, 15
|
||||
mesh_max: 450, 450
|
||||
probe_count: 5 , 5
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 3.000
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,317 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||
# the files and/or settings you need.
|
||||
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||
# that you follow these steps to properly calibrate your printer:
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
# [include config/boards/btt-skr-pro-12/config.cfg]
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
#[include config/boards/btt-octopus-pro-446/config.cfg]
|
||||
#[include config/boards/btt-octopus-pro-429/config.cfg]
|
||||
#[include config/boards/fysetc-spider/config.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
# COOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
# This increases motor torque, positional accuracy and speed limits.
|
||||
# don't enable this before your printer is fully configured and you have a fan blowing on your stepper drivers.
|
||||
#[include config/printers/v-core-3/speed-limits-performance.cfg]
|
||||
#[include config/printers/v-core-3/tmc2209-performance.cfg]
|
||||
#[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.6a-*.cfg]
|
||||
|
||||
# STEALTH MODE (Enables stealthchop and limits velocity and acceleration)
|
||||
# NOTE: You still need to include one of the above stepper motor definitions.
|
||||
# NOTE: This will make your printer quiter but less accurate, it's an inherent side effect of stealthchop.
|
||||
#[include config/printers/v-core-3/speed-limits-stealth.cfg]
|
||||
#[include config/printers/v-core-3/tmc2209-stealth.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
# Inductive/Capacitive probe
|
||||
# [include config/z-probe/probe.cfg]
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
# Sensorless homing (Beware: this requires manual tinkering and does not work if your x/y stepper drivers
|
||||
# have clipped DIAG pins). It is strongly encouraged to use physical endstops if you're a beginner.
|
||||
# If you still wish to proceed, copy config/templates/sensorless-homing-tmc2209.cfg to the root directory and
|
||||
# remove the # from the line below.
|
||||
#[include sensorless-homing-tmc2209.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
# Remove the # from your printer size below.
|
||||
# Similarly add a # in front of [include config/printers/v-core-3/300.cfg] if you have a bigger machine.
|
||||
#[include config/printers/v-core-3/300.cfg]
|
||||
#[include config/printers/v-core-3/400.cfg]
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### TOOLHEAD
|
||||
### Pick your extruder and hotend
|
||||
#############################################################################################################
|
||||
# Extruder
|
||||
# [include config/extruders/bmg.cfg]
|
||||
#[include config/extruders/lgx.cfg]
|
||||
#[include config/extruders/lgx-lite.cfg]
|
||||
[include config/extruders/orbiter.cfg]
|
||||
#[include config/extruders/orbiter-1004.cfg] # Use this with the LDO-36STH20-1004AHG motor
|
||||
#[include config/extruders/hemera.cfg]
|
||||
#[include config/extruders/titan.cfg]
|
||||
|
||||
# Hotend
|
||||
# [include config/hotends/v6.cfg]
|
||||
#[include config/hotends/dragonfly.cfg]
|
||||
#[include config/hotends/rapido.cfg]
|
||||
#[include config/hotends/copperhead.cfg]
|
||||
[include config/hotends/mosquito.cfg]
|
||||
#[include config/hotends/mosquito-magnum.cfg]
|
||||
#[include config/hotends/dragon-standard-flow.cfg]
|
||||
#[include config/hotends/dragon-high-flow.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "primeline"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 200
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
z_offset: 3.250 # Adjust this to fit your setup
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### USER OVERRIDES
|
||||
### Anything custom you want to add, or RatOS configuration you want to override, do it here.
|
||||
#############################################################################################################
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
[bed_mesh]
|
||||
speed: 30
|
||||
horizontal_move_z: 10
|
||||
mesh_min: 15, 15
|
||||
mesh_max: 450, 450
|
||||
probe_count: 5 , 5
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 3.000
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.665625, 0.318437, 0.321250, 0.343125, 0.492500
|
||||
#*# 0.355000, 0.167187, 0.182187, 0.291250, 0.432187
|
||||
#*# -0.072813, -0.134063, 0.024687, 0.226562, 0.419062
|
||||
#*# -0.187813, -0.070938, 0.104375, 0.360312, 0.524062
|
||||
#*# 0.080937, 0.189687, 0.425000, 0.623750, 0.892500
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,309 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# The first thing you'll need to do is go through this file and comment out / uncomment
|
||||
# the files and/or settings you need.
|
||||
# You'll be able to print just fine with this config as it is, but it is recommended
|
||||
# that you follow these steps to properly calibrate your printer:
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### TOOLHEAD
|
||||
### Pick your extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[include config/extruders/orbiter.cfg]
|
||||
|
||||
|
||||
|
||||
[include config/hotends/mosquito.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "primeline"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 200
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.250 # USE FOR PLA
|
||||
z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### USER OVERRIDES
|
||||
### Anything custom you want to add, or RatOS configuration you want to override, do it here.
|
||||
#############################################################################################################
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
[bed_mesh]
|
||||
speed: 30
|
||||
horizontal_move_z: 10
|
||||
mesh_min: 15, 15
|
||||
mesh_max: 450, 450
|
||||
probe_count: 5 , 5
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.665625, 0.318437, 0.321250, 0.343125, 0.492500
|
||||
#*# 0.355000, 0.167187, 0.182187, 0.291250, 0.432187
|
||||
#*# -0.072813, -0.134063, 0.024687, 0.226562, 0.419062
|
||||
#*# -0.187813, -0.070938, 0.104375, 0.360312, 0.524062
|
||||
#*# 0.080937, 0.189687, 0.425000, 0.623750, 0.892500
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,324 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "primeline"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 200
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
z_offset: 3.250 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.665625, 0.318437, 0.321250, 0.343125, 0.492500
|
||||
#*# 0.355000, 0.167187, 0.182187, 0.291250, 0.432187
|
||||
#*# -0.072813, -0.134063, 0.024687, 0.226562, 0.419062
|
||||
#*# -0.187813, -0.070938, 0.104375, 0.360312, 0.524062
|
||||
#*# 0.080937, 0.189687, 0.425000, 0.623750, 0.892500
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,325 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "primeline"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 200
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# -0.235313, -0.193125, -0.027813, 0.191875, 0.476875, 0.754062, 1.087812
|
||||
#*# -0.378125, -0.287188, -0.063438, 0.204375, 0.473125, 0.758125, 1.094375
|
||||
#*# -0.641250, -0.455000, -0.162813, 0.093437, 0.465000, 0.760000, 1.108750
|
||||
#*# -0.817188, -0.576875, -0.252188, 0.101562, 0.465625, 0.779375, 1.198437
|
||||
#*# -0.790938, -0.513750, -0.152188, 0.205312, 0.618750, 0.991875, 1.332187
|
||||
#*# -0.656875, -0.310625, 0.096250, 0.469375, 0.854062, 1.195625, 1.360000
|
||||
#*# -0.368750, -0.051563, 0.107500, 0.780625, 1.135000, 1.506562, 1.395312
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,325 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "primeline"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 200
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.076994, -0.084569, -0.111131, -0.102694, -0.081444, -0.037381, 0.026994
|
||||
#*# -0.119569, -0.203631, -0.207069, -0.183006, -0.136756, -0.085194, 0.025119
|
||||
#*# -0.448006, -0.488944, -0.417381, -0.373319, -0.235819, -0.161131, -0.018631
|
||||
#*# -0.689256, -0.702069, -0.599569, -0.460194, -0.332069, -0.228006, -0.039881
|
||||
#*# -0.778944, -0.676444, -0.572381, -0.391756, -0.245194, -0.123631, -0.011444
|
||||
#*# -0.694881, -0.585194, -0.413631, -0.256131, -0.088944, 0.020744, 0.171369
|
||||
#*# -0.536444, -0.409569, -0.210819, -0.007381, 0.111369, 0.250119, 0.395119
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,326 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "primeline"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 200
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 3.000
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.076994, -0.084569, -0.111131, -0.102694, -0.081444, -0.037381, 0.026994
|
||||
#*# -0.119569, -0.203631, -0.207069, -0.183006, -0.136756, -0.085194, 0.025119
|
||||
#*# -0.448006, -0.488944, -0.417381, -0.373319, -0.235819, -0.161131, -0.018631
|
||||
#*# -0.689256, -0.702069, -0.599569, -0.460194, -0.332069, -0.228006, -0.039881
|
||||
#*# -0.778944, -0.676444, -0.572381, -0.391756, -0.245194, -0.123631, -0.011444
|
||||
#*# -0.694881, -0.585194, -0.413631, -0.256131, -0.088944, 0.020744, 0.171369
|
||||
#*# -0.536444, -0.409569, -0.210819, -0.007381, 0.111369, 0.250119, 0.395119
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,326 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "primeline"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 200
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.350
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.076994, -0.084569, -0.111131, -0.102694, -0.081444, -0.037381, 0.026994
|
||||
#*# -0.119569, -0.203631, -0.207069, -0.183006, -0.136756, -0.085194, 0.025119
|
||||
#*# -0.448006, -0.488944, -0.417381, -0.373319, -0.235819, -0.161131, -0.018631
|
||||
#*# -0.689256, -0.702069, -0.599569, -0.460194, -0.332069, -0.228006, -0.039881
|
||||
#*# -0.778944, -0.676444, -0.572381, -0.391756, -0.245194, -0.123631, -0.011444
|
||||
#*# -0.694881, -0.585194, -0.413631, -0.256131, -0.088944, 0.020744, 0.171369
|
||||
#*# -0.536444, -0.409569, -0.210819, -0.007381, 0.111369, 0.250119, 0.395119
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,333 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.420
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.076994, -0.084569, -0.111131, -0.102694, -0.081444, -0.037381, 0.026994
|
||||
#*# -0.119569, -0.203631, -0.207069, -0.183006, -0.136756, -0.085194, 0.025119
|
||||
#*# -0.448006, -0.488944, -0.417381, -0.373319, -0.235819, -0.161131, -0.018631
|
||||
#*# -0.689256, -0.702069, -0.599569, -0.460194, -0.332069, -0.228006, -0.039881
|
||||
#*# -0.778944, -0.676444, -0.572381, -0.391756, -0.245194, -0.123631, -0.011444
|
||||
#*# -0.694881, -0.585194, -0.413631, -0.256131, -0.088944, 0.020744, 0.171369
|
||||
#*# -0.536444, -0.409569, -0.210819, -0.007381, 0.111369, 0.250119, 0.395119
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,333 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.420
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 1.234375, 1.030937, 0.958125, 0.954062, 0.965937, 1.021250, 1.136562
|
||||
#*# 0.888750, 0.708437, 0.675625, 0.688750, 0.715312, 0.784062, 0.905000
|
||||
#*# 0.318437, 0.226562, 0.266562, 0.291250, 0.431562, 0.515000, 0.659062
|
||||
#*# -0.122188, -0.187813, -0.078125, 0.014687, 0.115000, 0.226875, 0.448437
|
||||
#*# -0.408438, -0.375313, -0.289688, -0.144688, 0.028125, 0.154687, 0.302812
|
||||
#*# -0.528125, -0.465000, -0.339375, -0.200000, -0.032188, 0.085625, 0.249687
|
||||
#*# -0.535938, -0.477500, -0.362500, -0.109688, -0.003125, 0.137500, 0.296250
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,333 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.690
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 1.234375, 1.030937, 0.958125, 0.954062, 0.965937, 1.021250, 1.136562
|
||||
#*# 0.888750, 0.708437, 0.675625, 0.688750, 0.715312, 0.784062, 0.905000
|
||||
#*# 0.318437, 0.226562, 0.266562, 0.291250, 0.431562, 0.515000, 0.659062
|
||||
#*# -0.122188, -0.187813, -0.078125, 0.014687, 0.115000, 0.226875, 0.448437
|
||||
#*# -0.408438, -0.375313, -0.289688, -0.144688, 0.028125, 0.154687, 0.302812
|
||||
#*# -0.528125, -0.465000, -0.339375, -0.200000, -0.032188, 0.085625, 0.249687
|
||||
#*# -0.535938, -0.477500, -0.362500, -0.109688, -0.003125, 0.137500, 0.296250
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,333 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.690
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.076778, -0.106972, -0.166660, -0.144785, -0.129785, -0.057597, 0.052715
|
||||
#*# -0.072285, -0.230097, -0.240410, -0.214160, -0.171347, -0.093222, 0.034590
|
||||
#*# -0.430722, -0.510722, -0.452910, -0.410097, -0.266660, -0.178535, -0.015722
|
||||
#*# -0.661660, -0.700410, -0.585097, -0.471347, -0.359472, -0.238535, -0.011347
|
||||
#*# -0.746972, -0.688222, -0.587910, -0.410722, -0.236347, -0.099785, 0.033028
|
||||
#*# -0.646035, -0.576972, -0.431972, -0.274785, -0.103222, 0.032403, 0.185840
|
||||
#*# -0.485097, -0.396035, -0.216660, 0.005215, 0.113653, 0.230840, 0.423340
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,333 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.690
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.605625, 0.414687, 0.356250, 0.367500, 0.398125, 0.466875, 0.581250
|
||||
#*# 0.455625, 0.290937, 0.280000, 0.304687, 0.347500, 0.436875, 0.558437
|
||||
#*# 0.099062, 0.018750, 0.083125, 0.124687, 0.270937, 0.355312, 0.508437
|
||||
#*# -0.135625, -0.181563, -0.056250, 0.058125, 0.173437, 0.295625, 0.519062
|
||||
#*# -0.222813, -0.171250, -0.066563, 0.096562, 0.283750, 0.427812, 0.557812
|
||||
#*# -0.127813, -0.045313, 0.103750, 0.253125, 0.433750, 0.562812, 0.705937
|
||||
#*# 0.037500, 0.125312, 0.313125, 0.524062, 0.627500, 0.803125, 0.949687
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,333 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.690
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.642812, 0.434375, 0.372500, 0.375312, 0.400937, 0.475312, 0.600000
|
||||
#*# 0.476562, 0.315625, 0.293750, 0.314687, 0.354375, 0.433125, 0.552500
|
||||
#*# 0.130937, 0.044687, 0.088437, 0.122812, 0.268750, 0.362187, 0.518125
|
||||
#*# -0.099688, -0.155625, -0.032188, 0.071562, 0.185312, 0.304375, 0.526562
|
||||
#*# -0.169375, -0.124063, -0.024375, 0.143125, 0.319687, 0.461562, 0.600000
|
||||
#*# -0.059375, 0.020312, 0.166875, 0.306562, 0.484062, 0.612187, 0.778125
|
||||
#*# 0.148750, 0.221562, 0.394687, 0.580625, 0.734062, 0.877500, 1.017187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,333 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.840
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.642812, 0.434375, 0.372500, 0.375312, 0.400937, 0.475312, 0.600000
|
||||
#*# 0.476562, 0.315625, 0.293750, 0.314687, 0.354375, 0.433125, 0.552500
|
||||
#*# 0.130937, 0.044687, 0.088437, 0.122812, 0.268750, 0.362187, 0.518125
|
||||
#*# -0.099688, -0.155625, -0.032188, 0.071562, 0.185312, 0.304375, 0.526562
|
||||
#*# -0.169375, -0.124063, -0.024375, 0.143125, 0.319687, 0.461562, 0.600000
|
||||
#*# -0.059375, 0.020312, 0.166875, 0.306562, 0.484062, 0.612187, 0.778125
|
||||
#*# 0.148750, 0.221562, 0.394687, 0.580625, 0.734062, 0.877500, 1.017187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,333 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.850
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.642812, 0.434375, 0.372500, 0.375312, 0.400937, 0.475312, 0.600000
|
||||
#*# 0.476562, 0.315625, 0.293750, 0.314687, 0.354375, 0.433125, 0.552500
|
||||
#*# 0.130937, 0.044687, 0.088437, 0.122812, 0.268750, 0.362187, 0.518125
|
||||
#*# -0.099688, -0.155625, -0.032188, 0.071562, 0.185312, 0.304375, 0.526562
|
||||
#*# -0.169375, -0.124063, -0.024375, 0.143125, 0.319687, 0.461562, 0.600000
|
||||
#*# -0.059375, 0.020312, 0.166875, 0.306562, 0.484062, 0.612187, 0.778125
|
||||
#*# 0.148750, 0.221562, 0.394687, 0.580625, 0.734062, 0.877500, 1.017187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,333 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.850
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.092793, -0.123145, -0.191582, -0.197207, -0.136895, -0.059082, 0.073418
|
||||
#*# -0.076582, -0.232207, -0.252520, -0.241582, -0.177832, -0.099395, 0.034668
|
||||
#*# -0.402832, -0.495645, -0.453145, -0.419082, -0.254395, -0.171895, -0.009395
|
||||
#*# -0.620957, -0.661895, -0.592832, -0.437832, -0.309082, -0.193145, 0.019355
|
||||
#*# -0.694707, -0.646270, -0.553145, -0.383457, -0.217520, -0.066582, 0.095918
|
||||
#*# -0.620020, -0.527207, -0.365020, -0.218770, -0.047520, 0.103418, 0.275293
|
||||
#*# -0.415332, -0.320957, -0.160957, 0.065605, 0.190605, 0.361855, 0.526230
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,333 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
control: pid
|
||||
pid_kp: 28.413
|
||||
pid_ki: 1.334
|
||||
pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.850
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 1.313437, 0.977812, 0.689375, 0.579375, 0.573125, 0.628750, 0.753125
|
||||
#*# 1.114687, 0.745937, 0.505625, 0.410312, 0.433437, 0.475937, 0.642812
|
||||
#*# 0.641250, 0.383437, 0.238750, 0.187187, 0.187500, 0.297500, 0.466562
|
||||
#*# 0.305312, 0.055937, -0.007500, -0.028438, 0.030000, 0.133750, 0.346250
|
||||
#*# 0.109687, -0.020313, -0.112500, -0.099063, -0.017813, 0.103125, 0.262812
|
||||
#*# 0.100937, -0.010625, -0.056563, -0.043438, 0.002187, 0.138437, 0.253750
|
||||
#*# 0.141875, 0.058125, 0.030312, 0.043750, 0.098750, 0.162500, 0.337187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
|
|
@ -1,339 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
#control: pid
|
||||
#pid_kp: 28.413
|
||||
#pid_ki: 1.334
|
||||
#pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.850
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 1.313437, 0.977812, 0.689375, 0.579375, 0.573125, 0.628750, 0.753125
|
||||
#*# 1.114687, 0.745937, 0.505625, 0.410312, 0.433437, 0.475937, 0.642812
|
||||
#*# 0.641250, 0.383437, 0.238750, 0.187187, 0.187500, 0.297500, 0.466562
|
||||
#*# 0.305312, 0.055937, -0.007500, -0.028438, 0.030000, 0.133750, 0.346250
|
||||
#*# 0.109687, -0.020313, -0.112500, -0.099063, -0.017813, 0.103125, 0.262812
|
||||
#*# 0.100937, -0.010625, -0.056563, -0.043438, 0.002187, 0.138437, 0.253750
|
||||
#*# 0.141875, 0.058125, 0.030312, 0.043750, 0.098750, 0.162500, 0.337187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 19.616
|
||||
#*# pid_ki = 0.844
|
||||
#*# pid_kd = 114.017
|
||||
|
|
@ -1,345 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
#control: pid
|
||||
#pid_kp: 28.413
|
||||
#pid_ki: 1.334
|
||||
#pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
#control: pid
|
||||
#pid_Kp: 22.2
|
||||
#pid_Ki: 1.08
|
||||
#pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.850
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 1.313437, 0.977812, 0.689375, 0.579375, 0.573125, 0.628750, 0.753125
|
||||
#*# 1.114687, 0.745937, 0.505625, 0.410312, 0.433437, 0.475937, 0.642812
|
||||
#*# 0.641250, 0.383437, 0.238750, 0.187187, 0.187500, 0.297500, 0.466562
|
||||
#*# 0.305312, 0.055937, -0.007500, -0.028438, 0.030000, 0.133750, 0.346250
|
||||
#*# 0.109687, -0.020313, -0.112500, -0.099063, -0.017813, 0.103125, 0.262812
|
||||
#*# 0.100937, -0.010625, -0.056563, -0.043438, 0.002187, 0.138437, 0.253750
|
||||
#*# 0.141875, 0.058125, 0.030312, 0.043750, 0.098750, 0.162500, 0.337187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 19.616
|
||||
#*# pid_ki = 0.844
|
||||
#*# pid_kd = 114.017
|
||||
#*#
|
||||
#*# [heater_bed]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 64.455
|
||||
#*# pid_ki = 1.659
|
||||
#*# pid_kd = 626.020
|
||||
|
|
@ -1,345 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
#control: pid
|
||||
#pid_kp: 28.413
|
||||
#pid_ki: 1.334
|
||||
#pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
#control: pid
|
||||
#pid_Kp: 22.2
|
||||
#pid_Ki: 1.08
|
||||
#pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.850
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 1.445937, 1.000625, 0.731875, 0.610312, 0.571250, 0.647500, 0.806562
|
||||
#*# 1.134375, 0.795625, 0.563437, 0.455312, 0.432812, 0.516250, 0.655625
|
||||
#*# 0.707812, 0.420937, 0.238750, 0.173125, 0.214687, 0.304062, 0.503125
|
||||
#*# 0.351250, 0.096875, -0.020938, -0.000313, 0.054062, 0.128750, 0.320937
|
||||
#*# 0.168125, -0.004688, -0.131250, -0.157500, -0.024375, 0.066562, 0.276562
|
||||
#*# 0.130937, -0.047500, -0.102813, -0.122188, -0.025000, 0.051562, 0.230937
|
||||
#*# 0.169687, 0.032500, -0.055938, -0.006250, 0.036250, 0.115937, 0.316250
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 19.616
|
||||
#*# pid_ki = 0.844
|
||||
#*# pid_kd = 114.017
|
||||
#*#
|
||||
#*# [heater_bed]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 64.455
|
||||
#*# pid_ki = 1.659
|
||||
#*# pid_kd = 626.020
|
||||
|
|
@ -1,345 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
#control: pid
|
||||
#pid_kp: 28.413
|
||||
#pid_ki: 1.334
|
||||
#pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
#control: pid
|
||||
#pid_Kp: 22.2
|
||||
#pid_Ki: 1.08
|
||||
#pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.830
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 1.445937, 1.000625, 0.731875, 0.610312, 0.571250, 0.647500, 0.806562
|
||||
#*# 1.134375, 0.795625, 0.563437, 0.455312, 0.432812, 0.516250, 0.655625
|
||||
#*# 0.707812, 0.420937, 0.238750, 0.173125, 0.214687, 0.304062, 0.503125
|
||||
#*# 0.351250, 0.096875, -0.020938, -0.000313, 0.054062, 0.128750, 0.320937
|
||||
#*# 0.168125, -0.004688, -0.131250, -0.157500, -0.024375, 0.066562, 0.276562
|
||||
#*# 0.130937, -0.047500, -0.102813, -0.122188, -0.025000, 0.051562, 0.230937
|
||||
#*# 0.169687, 0.032500, -0.055938, -0.006250, 0.036250, 0.115937, 0.316250
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 19.616
|
||||
#*# pid_ki = 0.844
|
||||
#*# pid_kd = 114.017
|
||||
#*#
|
||||
#*# [heater_bed]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 64.455
|
||||
#*# pid_ki = 1.659
|
||||
#*# pid_kd = 626.020
|
||||
|
|
@ -1,345 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 285
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
#control: pid
|
||||
#pid_kp: 28.413
|
||||
#pid_ki: 1.334
|
||||
#pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
#control: pid
|
||||
#pid_Kp: 22.2
|
||||
#pid_Ki: 1.08
|
||||
#pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.970
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 1.445937, 1.000625, 0.731875, 0.610312, 0.571250, 0.647500, 0.806562
|
||||
#*# 1.134375, 0.795625, 0.563437, 0.455312, 0.432812, 0.516250, 0.655625
|
||||
#*# 0.707812, 0.420937, 0.238750, 0.173125, 0.214687, 0.304062, 0.503125
|
||||
#*# 0.351250, 0.096875, -0.020938, -0.000313, 0.054062, 0.128750, 0.320937
|
||||
#*# 0.168125, -0.004688, -0.131250, -0.157500, -0.024375, 0.066562, 0.276562
|
||||
#*# 0.130937, -0.047500, -0.102813, -0.122188, -0.025000, 0.051562, 0.230937
|
||||
#*# 0.169687, 0.032500, -0.055938, -0.006250, 0.036250, 0.115937, 0.316250
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 19.616
|
||||
#*# pid_ki = 0.844
|
||||
#*# pid_kd = 114.017
|
||||
#*#
|
||||
#*# [heater_bed]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 64.455
|
||||
#*# pid_ki = 1.659
|
||||
#*# pid_kd = 626.020
|
||||
|
|
@ -1,345 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 400
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
#control: pid
|
||||
#pid_kp: 28.413
|
||||
#pid_ki: 1.334
|
||||
#pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
#control: pid
|
||||
#pid_Kp: 22.2
|
||||
#pid_Ki: 1.08
|
||||
#pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.970
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 1.445937, 1.000625, 0.731875, 0.610312, 0.571250, 0.647500, 0.806562
|
||||
#*# 1.134375, 0.795625, 0.563437, 0.455312, 0.432812, 0.516250, 0.655625
|
||||
#*# 0.707812, 0.420937, 0.238750, 0.173125, 0.214687, 0.304062, 0.503125
|
||||
#*# 0.351250, 0.096875, -0.020938, -0.000313, 0.054062, 0.128750, 0.320937
|
||||
#*# 0.168125, -0.004688, -0.131250, -0.157500, -0.024375, 0.066562, 0.276562
|
||||
#*# 0.130937, -0.047500, -0.102813, -0.122188, -0.025000, 0.051562, 0.230937
|
||||
#*# 0.169687, 0.032500, -0.055938, -0.006250, 0.036250, 0.115937, 0.316250
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 19.616
|
||||
#*# pid_ki = 0.844
|
||||
#*# pid_kd = 114.017
|
||||
#*#
|
||||
#*# [heater_bed]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 64.455
|
||||
#*# pid_ki = 1.659
|
||||
#*# pid_kd = 626.020
|
||||
|
|
@ -1,345 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 400
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
#control: pid
|
||||
#pid_kp: 28.413
|
||||
#pid_ki: 1.334
|
||||
#pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
#control: pid
|
||||
#pid_Kp: 22.2
|
||||
#pid_Ki: 1.08
|
||||
#pid_Kd: 114
|
||||
|
||||
|
||||
[gcode_macro _START_PRINT_AFTER_HEATING_BED]
|
||||
gcode:
|
||||
{% if printer["gcode_macro RatOS"].preheat_extruder|lower == 'true' %}
|
||||
M117 Pre-heating extruder...
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
M104 S150
|
||||
TEMPERATURE_WAIT SENSOR=extruder MINIMUM=150
|
||||
{% endif %}
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 20,20
|
||||
mesh_max:465,460
|
||||
probe_count: 7,7
|
||||
fade_start: 1.0
|
||||
fade_end: 10.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 2.970
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 1.483437, 1.039687, 0.779375, 0.643125, 0.624062, 0.697187, 0.867187
|
||||
#*# 1.172187, 0.811875, 0.578437, 0.485937, 0.463750, 0.526250, 0.673437
|
||||
#*# 0.741562, 0.450625, 0.270000, 0.197187, 0.259687, 0.335000, 0.527187
|
||||
#*# 0.402187, 0.171562, 0.036250, 0.046875, 0.099062, 0.176562, 0.401562
|
||||
#*# 0.253750, 0.084062, -0.041563, -0.075313, 0.048750, 0.161562, 0.355312
|
||||
#*# 0.275625, 0.098437, 0.026250, 0.034687, 0.112187, 0.173125, 0.388750
|
||||
#*# 0.368125, 0.239375, 0.128750, 0.185000, 0.236562, 0.330937, 0.498125
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 19.616
|
||||
#*# pid_ki = 0.844
|
||||
#*# pid_kd = 114.017
|
||||
#*#
|
||||
#*# [heater_bed]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 64.455
|
||||
#*# pid_ki = 1.659
|
||||
#*# pid_kd = 626.020
|
||||
|
|
@ -1,335 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 400
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
#control: pid
|
||||
#pid_kp: 28.413
|
||||
#pid_ki: 1.334
|
||||
#pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
#control: pid
|
||||
#pid_Kp: 22.2
|
||||
#pid_Ki: 1.08
|
||||
#pid_Kd: 114
|
||||
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 28,21
|
||||
mesh_max:465,460
|
||||
probe_count: 9,9
|
||||
fade_start: 5.0
|
||||
fade_end: 100.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 3.040
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 1.483437, 1.039687, 0.779375, 0.643125, 0.624062, 0.697187, 0.867187
|
||||
#*# 1.172187, 0.811875, 0.578437, 0.485937, 0.463750, 0.526250, 0.673437
|
||||
#*# 0.741562, 0.450625, 0.270000, 0.197187, 0.259687, 0.335000, 0.527187
|
||||
#*# 0.402187, 0.171562, 0.036250, 0.046875, 0.099062, 0.176562, 0.401562
|
||||
#*# 0.253750, 0.084062, -0.041563, -0.075313, 0.048750, 0.161562, 0.355312
|
||||
#*# 0.275625, 0.098437, 0.026250, 0.034687, 0.112187, 0.173125, 0.388750
|
||||
#*# 0.368125, 0.239375, 0.128750, 0.185000, 0.236562, 0.330937, 0.498125
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 20.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 7
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 20.0
|
||||
#*# x_count = 7
|
||||
#*# max_y = 459.98
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 19.616
|
||||
#*# pid_ki = 0.844
|
||||
#*# pid_kd = 114.017
|
||||
#*#
|
||||
#*# [heater_bed]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 64.455
|
||||
#*# pid_ki = 1.659
|
||||
#*# pid_kd = 626.020
|
||||
|
|
@ -1,337 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 400
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
#control: pid
|
||||
#pid_kp: 28.413
|
||||
#pid_ki: 1.334
|
||||
#pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
#control: pid
|
||||
#pid_Kp: 22.2
|
||||
#pid_Ki: 1.08
|
||||
#pid_Kd: 114
|
||||
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 28,21
|
||||
mesh_max:465,460
|
||||
probe_count: 9,9
|
||||
fade_start: 5.0
|
||||
fade_end: 100.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 3.040
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.214687, 0.072812, -0.035625, 0.027500, 0.127812, 0.281875, 0.506562, 0.751250, 1.058125
|
||||
#*# 0.165000, 0.044687, 0.000625, 0.066562, 0.135312, 0.282187, 0.538750, 0.790937, 1.090000
|
||||
#*# -0.003125, -0.102813, -0.117813, -0.011250, 0.075937, 0.257500, 0.522500, 0.781875, 1.074375
|
||||
#*# -0.157813, -0.210313, -0.180000, -0.056250, 0.060937, 0.263437, 0.502812, 0.740312, 1.124375
|
||||
#*# -0.273125, -0.289688, -0.250938, -0.127188, 0.040937, 0.276875, 0.535000, 0.824375, 1.150000
|
||||
#*# -0.288750, -0.273438, -0.158438, -0.060313, 0.130937, 0.336250, 0.614687, 0.891562, 1.222187
|
||||
#*# -0.216875, -0.169063, -0.040000, 0.065000, 0.217187, 0.488437, 0.743437, 1.053437, 1.331875
|
||||
#*# -0.070313, 0.036562, 0.085625, 0.294687, 0.481875, 0.691562, 0.940625, 1.191562, 1.515312
|
||||
#*# 0.145625, 0.206250, 0.327812, 0.462812, 0.699375, 0.870000, 1.129062, 1.390000, 1.727812
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 28.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 9
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 21.0
|
||||
#*# x_count = 9
|
||||
#*# max_y = 459.96
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 19.616
|
||||
#*# pid_ki = 0.844
|
||||
#*# pid_kd = 114.017
|
||||
#*#
|
||||
#*# [heater_bed]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 64.455
|
||||
#*# pid_ki = 1.659
|
||||
#*# pid_kd = 626.020
|
||||
|
|
@ -1,337 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 400
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
#control: pid
|
||||
#pid_kp: 28.413
|
||||
#pid_ki: 1.334
|
||||
#pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
#control: pid
|
||||
#pid_Kp: 22.2
|
||||
#pid_Ki: 1.08
|
||||
#pid_Kd: 114
|
||||
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 28,21
|
||||
mesh_max:465,460
|
||||
probe_count: 10,10
|
||||
fade_start: 5.0
|
||||
fade_end: 100.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 3.040
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.660312, 0.425937, 0.243437, 0.205937, 0.228750, 0.271562, 0.402812, 0.508125, 0.738437
|
||||
#*# 0.583750, 0.385312, 0.237187, 0.238125, 0.210625, 0.289687, 0.404687, 0.571250, 0.730937
|
||||
#*# 0.385625, 0.228437, 0.141250, 0.142187, 0.120000, 0.198750, 0.347812, 0.532187, 0.732187
|
||||
#*# 0.198750, 0.099062, 0.035000, 0.058750, 0.114687, 0.195625, 0.353125, 0.498750, 0.735000
|
||||
#*# 0.084687, -0.007813, -0.048750, -0.034375, 0.088125, 0.183750, 0.344062, 0.517500, 0.749375
|
||||
#*# 0.085312, -0.000938, 0.030312, 0.031562, 0.112812, 0.270000, 0.425312, 0.583437, 0.839062
|
||||
#*# 0.157187, 0.124687, 0.151250, 0.177187, 0.226562, 0.390000, 0.530000, 0.759375, 0.955000
|
||||
#*# 0.339062, 0.341562, 0.311250, 0.387812, 0.483437, 0.583125, 0.772500, 0.908125, 1.141250
|
||||
#*# 0.542500, 0.534375, 0.544062, 0.583437, 0.694375, 0.822187, 0.948125, 1.116562, 1.328750
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 28.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 9
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 21.0
|
||||
#*# x_count = 9
|
||||
#*# max_y = 459.96
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.96
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 19.616
|
||||
#*# pid_ki = 0.844
|
||||
#*# pid_kd = 114.017
|
||||
#*#
|
||||
#*# [heater_bed]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 64.455
|
||||
#*# pid_ki = 1.659
|
||||
#*# pid_kd = 626.020
|
||||
|
|
@ -1,339 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 400
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
#control: pid
|
||||
#pid_kp: 28.413
|
||||
#pid_ki: 1.334
|
||||
#pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
#control: pid
|
||||
#pid_Kp: 22.2
|
||||
#pid_Ki: 1.08
|
||||
#pid_Kd: 114
|
||||
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 28,21
|
||||
mesh_max:465,460
|
||||
probe_count: 10,10
|
||||
fade_start: 5.0
|
||||
fade_end: 100.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 3.040
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.554687, 0.365625, 0.198750, 0.172812, 0.177187, 0.190312, 0.257812, 0.384687, 0.452812, 0.651250
|
||||
#*# 0.486562, 0.327500, 0.212812, 0.185000, 0.172500, 0.203750, 0.287812, 0.420000, 0.500312, 0.650000
|
||||
#*# 0.333750, 0.207187, 0.110312, 0.122187, 0.113750, 0.153750, 0.250937, 0.366250, 0.481562, 0.628750
|
||||
#*# 0.189687, 0.042187, 0.013125, 0.030625, 0.054375, 0.127500, 0.220937, 0.338125, 0.440000, 0.647500
|
||||
#*# 0.025312, -0.028438, -0.076875, -0.064063, 0.002812, 0.087500, 0.225625, 0.301562, 0.465312, 0.648125
|
||||
#*# -0.059688, -0.114063, -0.105938, -0.070313, -0.007813, 0.090937, 0.198437, 0.345000, 0.483125, 0.686875
|
||||
#*# -0.027188, -0.020625, -0.062500, -0.005625, 0.067812, 0.173125, 0.296562, 0.439687, 0.588125, 0.775312
|
||||
#*# 0.077500, 0.041250, 0.079062, 0.127500, 0.202812, 0.316250, 0.420000, 0.568125, 0.728437, 0.872500
|
||||
#*# 0.190937, 0.223750, 0.210937, 0.259687, 0.368125, 0.490625, 0.604375, 0.697500, 0.824687, 0.992187
|
||||
#*# 0.385312, 0.390625, 0.421250, 0.490937, 0.569062, 0.655312, 0.773125, 0.874375, 1.056875, 1.204375
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 28.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 10
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 21.0
|
||||
#*# x_count = 10
|
||||
#*# max_y = 459.93
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.95
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 19.616
|
||||
#*# pid_ki = 0.844
|
||||
#*# pid_kd = 114.017
|
||||
#*#
|
||||
#*# [heater_bed]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 64.455
|
||||
#*# pid_ki = 1.659
|
||||
#*# pid_kd = 626.020
|
||||
|
|
@ -1,339 +0,0 @@
|
|||
# Rat Rig V-core 3 Klipper Config
|
||||
# Documentation: https://os.ratrig.com
|
||||
|
||||
# 0) Sanity check and PID Tuning: https://www.klipper3d.org/Config_checks.html
|
||||
# 1) Pressure Advance: https://www.klipper3d.org/Pressure_Advance.html
|
||||
# 2) Skew Correction: https://www.klipper3d.org/Skew_Correction.html
|
||||
# 3) Resonance Compensation: https://www.klipper3d.org/Resonance_Compensation.html
|
||||
|
||||
# Read more about klipper here: https://www.klipper3d.org/Overview.html
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### CONTROL BOARD
|
||||
### Pick the board you have installed and wired in your printer.
|
||||
#############################################################################################################
|
||||
[include config/boards/btt-octopus-11/config.cfg]
|
||||
|
||||
#############################################################################################################
|
||||
### BASE SETUP
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/v-core-3.cfg]
|
||||
[printer]
|
||||
max_velocity: 150
|
||||
max_accel: 500
|
||||
max_accel_to_decel: 500
|
||||
max_z_velocity: 15
|
||||
max_z_accel: 20
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### STEPPER MOTORS, DRIVERS & SPEED LIMITS
|
||||
### Pick the drivers and stepper motors you're using. See the RatOS documentation for custom combinations.
|
||||
#############################################################################################################
|
||||
[include config/printers/v-core-3/steppers.cfg]
|
||||
|
||||
# UNCOOLED TMC 2209 + LDO-42STH48-2504AC
|
||||
[include config/printers/v-core-3/speed-limits-basic.cfg]
|
||||
|
||||
|
||||
[include config/printers/v-core-3/tmc2209.cfg]
|
||||
|
||||
[include config/steppers/ldo/42sth48-2504ac/2209/24v-1.1a-*.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### HOMING
|
||||
### Pick your probe and endstops
|
||||
#############################################################################################################
|
||||
# BL Touch
|
||||
[include config/z-probe/bltouch.cfg]
|
||||
|
||||
|
||||
# Physical endstops
|
||||
[include config/printers/v-core-3/physical-endstops.cfg]
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PHYSICAL DIMENSIONS
|
||||
### Pick your printer size
|
||||
#############################################################################################################
|
||||
|
||||
[include config/printers/v-core-3/500.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### extruder and hotend
|
||||
#############################################################################################################
|
||||
|
||||
[extruder]
|
||||
rotation_distance: 4.63
|
||||
full_steps_per_rotation: 200
|
||||
filament_diameter: 1.750
|
||||
max_extrude_only_velocity: 60
|
||||
max_extrude_only_distance: 200
|
||||
nozzle_diameter: 0.4
|
||||
heater_pin: e_heater_pin
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: e_sensor_pin
|
||||
min_extrude_temp: 170
|
||||
min_temp: 0
|
||||
max_temp: 400
|
||||
pressure_advance: 0.05
|
||||
|
||||
[tmc2209 extruder]
|
||||
run_current: 0.35
|
||||
stealthchop_threshold: 0
|
||||
|
||||
[firmware_retraction]
|
||||
retract_speed: 60
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 60
|
||||
retract_length: 0.5
|
||||
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACROS
|
||||
#############################################################################################################
|
||||
[include config/macros.cfg]
|
||||
[include config/shell-macros.cfg]
|
||||
[include config/printers/v-core-3/macros.cfg]
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### MACRO CONFIGURATION
|
||||
### Configure the behavior of RatOS macros
|
||||
#############################################################################################################
|
||||
[gcode_macro RatOS]
|
||||
# Use absolute extrusion mode
|
||||
# Set to True to use relative extrusion mode
|
||||
variable_relative_extrusion: False
|
||||
# Wait for extruder to reach 150 so an inductive probe (if present) is at a predictable temp.
|
||||
# Also allows the bed heat to spread a little, and softens any plastic that might be stuck to the nozzle.
|
||||
# Set to False to disable
|
||||
variable_preheat_extruder: True
|
||||
# Calibrate the bed mesh in the START_PRINT macro.
|
||||
# Set to false to skip BED_MESH_CALIBRATE, it will still load the BED_MESH
|
||||
# with the name "ratos", be sure to save your bed_mesh profile with that name.
|
||||
# or override the _START_PRINT_BED_MESH macro to implement your own mesh handling logic.
|
||||
variable_calibrate_bed_mesh: True
|
||||
# Print a prime line or blob at the end of the START_PRINT macro
|
||||
# set to "primeline" or "primeblob", or False to disable nozzle_priming.
|
||||
variable_nozzle_priming: "false"
|
||||
# Park in the back when waiting for the extruder to heat up
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_start_print_park_in: "back"
|
||||
# Height to park it when waiting for extruder to heat.
|
||||
variable_start_print_park_z_height: 50
|
||||
# Skew profile to load before starting the print
|
||||
# uncomment this to use your calibrated skew correction profile.
|
||||
#variable_skew_profile: "my_skew_profile"
|
||||
# Park in the back after the print has ended or was cancelled.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_end_print_park_in: "back"
|
||||
# Park in the back when the print is paused.
|
||||
# set to "front" to park in the front, or "center" to park in the center.
|
||||
variable_pause_print_park_in: "back"
|
||||
# Set the speed for travel moves in RatOS Macros in mm/s.
|
||||
variable_macro_travel_speed: 100
|
||||
|
||||
|
||||
#############################################################################################################
|
||||
### PRINTER CONFIGURATION
|
||||
### Customize the defaults to your specific build
|
||||
#############################################################################################################
|
||||
[stepper_x]
|
||||
dir_pin: x_dir_pin # Add ! in front of pin name to reverse X stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 0 # Adjust this to your setup
|
||||
#x_offset: -27.0
|
||||
|
||||
|
||||
|
||||
[stepper_y]
|
||||
dir_pin: y_dir_pin # Add ! in front of pin name to reverse Y stepper direction
|
||||
rotation_distance: 40 # 40 for 20 tooth 2GT pulleys, 32 for 16 tooth 2GT pulleys
|
||||
position_endstop: 480 # 300mm printer
|
||||
position_min: 5
|
||||
#y_offset: -21.0
|
||||
|
||||
|
||||
#position_endstop: 400 # 400mm printer
|
||||
#position_endstop: 500 # 500mm printer
|
||||
|
||||
[stepper_z]
|
||||
dir_pin: !z0_dir_pin # Add ! in front of pin name to reverse Z stepper direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z1]
|
||||
dir_pin: !z1_dir_pin # Add ! in front of pin name to reverse Z1 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
[stepper_z2]
|
||||
dir_pin: !z2_dir_pin # Add ! in front of pin name to reverse Z2 direction
|
||||
rotation_distance: 4 # 4 for TR8*4 lead screws
|
||||
endstop_pin: probe: z_virtual_endstop
|
||||
|
||||
#Z Probe configuration
|
||||
[bltouch]
|
||||
sensor_pin: ^PB7
|
||||
control_pin: PB6
|
||||
x_offset: -27.0
|
||||
y_offset: -21.0
|
||||
#pin_up_touch_mode_reports_triggered: True
|
||||
pin_move_time: 0.8
|
||||
#z_offset: 3.20 # USE FOR PLA
|
||||
#z_offset: 2.75 # USE FOR PETG
|
||||
|
||||
# [probe]
|
||||
# z_offset: 1.0 # Adjust this to fit your setup -> "1.0" is placeholder!
|
||||
# pin: ^probe_pin # For NPN NC probes such as the Super Pinda / Vinda / SupCR / Decoprobe probes.
|
||||
#pin: ^!probe_pin # NPN NO (refer to the specs on your probe)
|
||||
#pin: probe_pin # PNP NO (refer to the specs on your probe)
|
||||
#pin: !probe_pin # PNP NC (refer to the specs on your probe)
|
||||
|
||||
# Safe Z Home (Physical endstops only)
|
||||
[safe_z_home]
|
||||
home_xy_position: 250, 250 # Change coordinates to the center of your print bed
|
||||
speed: 50
|
||||
z_hop: 10 # Move up 10mm
|
||||
z_hop_speed: 5
|
||||
|
||||
#ORIGINAL
|
||||
#home_xy_position: 150,150 # 300mm printer
|
||||
#home_xy_position: 200,200 # 400mm printer
|
||||
#home_xy_position: 250,250 # 500mm printer
|
||||
|
||||
[extruder]
|
||||
# Check https://www.klipper3d.org/Pressure_Advance.html for pressure advance tuning.
|
||||
#pressure_advance: 0.05
|
||||
nozzle_diameter: 0.4 # Remember to change this if you change nozzle diameter.
|
||||
dir_pin: e_dir_pin # Remove ! in front of pin name to reverse extruder direction
|
||||
#control: pid
|
||||
#pid_kp: 28.413
|
||||
#pid_ki: 1.334
|
||||
#pid_kd: 151.300
|
||||
|
||||
[heater_bed]
|
||||
#control: pid
|
||||
#pid_Kp: 22.2
|
||||
#pid_Ki: 1.08
|
||||
#pid_Kd: 114
|
||||
|
||||
|
||||
# [bed_mesh]
|
||||
# speed: 30
|
||||
# horizontal_move_z: 10
|
||||
# mesh_min: 15, 15
|
||||
# mesh_max: 450, 450
|
||||
# probe_count: 5 , 5
|
||||
|
||||
[bed_mesh]
|
||||
horizontal_move_z: 5
|
||||
mesh_min: 28,21
|
||||
mesh_max:465,460
|
||||
probe_count: 10,10
|
||||
fade_start: 5.0
|
||||
fade_end: 100.0
|
||||
mesh_pps: 2,2
|
||||
algorithm: bicubic
|
||||
bicubic_tension: .2
|
||||
|
||||
#############################################################################################################
|
||||
### INPUT SHAPER
|
||||
### Enable/disable input shaper calibration
|
||||
#############################################################################################################
|
||||
# Uncomment this next line if you have an ADXL345 connected to your control board
|
||||
#[include config/printers/v-core-3/input-shaper.cfg]
|
||||
|
||||
# ADXL345 resonance testing configuration
|
||||
#[resonance_tester]
|
||||
#probe_points:
|
||||
# 150,150,20 # 300mm printer
|
||||
# 200,200,20 # 400mm printer
|
||||
# 250,250,20 # 500mm printer
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
#*# [bltouch]
|
||||
#*# z_offset = 3.040
|
||||
#*#
|
||||
#*# [bed_mesh vcore]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.146250, -0.580313, -0.993438, -1.390000, -1.680625
|
||||
#*# 0.458125, -0.109688, -0.498750, -0.825938, -1.111250
|
||||
#*# 0.674375, 0.189687, -0.035313, -0.261250, -0.505000
|
||||
#*# 1.180937, 0.899687, 0.665000, 0.499375, 0.222500
|
||||
#*# 2.068437, 1.804375, 1.605000, 1.387500, 1.222187
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [bed_mesh default]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.639062, 0.424687, 0.258437, 0.241875, 0.230312, 0.246875, 0.328125, 0.414062, 0.500625, 0.680000
|
||||
#*# 0.564687, 0.393125, 0.277812, 0.231875, 0.185312, 0.231250, 0.281875, 0.411250, 0.548437, 0.672812
|
||||
#*# 0.420625, 0.269687, 0.158125, 0.149062, 0.135625, 0.183437, 0.253437, 0.372187, 0.493750, 0.635625
|
||||
#*# 0.261562, 0.093125, 0.050937, 0.038125, 0.081562, 0.124062, 0.225625, 0.337500, 0.458125, 0.671875
|
||||
#*# 0.072187, 0.003750, -0.058750, -0.050938, 0.008125, 0.077812, 0.234375, 0.315312, 0.470312, 0.645312
|
||||
#*# -0.024688, -0.101250, -0.121250, -0.080625, -0.048438, 0.078437, 0.175312, 0.323437, 0.460000, 0.666250
|
||||
#*# -0.021563, -0.035313, -0.082500, -0.036875, 0.003125, 0.100312, 0.242500, 0.379687, 0.519062, 0.723437
|
||||
#*# 0.054062, 0.006250, 0.014062, 0.055625, 0.117500, 0.200937, 0.335312, 0.489062, 0.647500, 0.789062
|
||||
#*# 0.137187, 0.130625, 0.120312, 0.160000, 0.248750, 0.358125, 0.451250, 0.552812, 0.729687, 0.897187
|
||||
#*# 0.296562, 0.284062, 0.302500, 0.377187, 0.430000, 0.519062, 0.624687, 0.718750, 0.899687, 1.069687
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 28.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 10
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 21.0
|
||||
#*# x_count = 10
|
||||
#*# max_y = 459.93
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 464.95
|
||||
#*#
|
||||
#*# [bed_mesh ratos]
|
||||
#*# version = 1
|
||||
#*# points =
|
||||
#*# 0.658750, 0.348437, 0.369062, 0.392500, 0.536250
|
||||
#*# 0.306562, 0.168125, 0.214375, 0.328750, 0.452812
|
||||
#*# -0.138750, -0.135625, 0.045312, 0.248125, 0.420000
|
||||
#*# -0.223750, -0.061875, 0.141250, 0.383437, 0.531250
|
||||
#*# 0.079375, 0.220000, 0.478750, 0.668750, -0.534063
|
||||
#*# tension = 0.2
|
||||
#*# min_x = 15.0
|
||||
#*# algo = bicubic
|
||||
#*# y_count = 5
|
||||
#*# mesh_y_pps = 2
|
||||
#*# min_y = 15.0
|
||||
#*# x_count = 5
|
||||
#*# max_y = 450.0
|
||||
#*# mesh_x_pps = 2
|
||||
#*# max_x = 450.0
|
||||
#*#
|
||||
#*# [extruder]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 19.616
|
||||
#*# pid_ki = 0.844
|
||||
#*# pid_kd = 114.017
|
||||
#*#
|
||||
#*# [heater_bed]
|
||||
#*# control = pid
|
||||
#*# pid_kp = 64.455
|
||||
#*# pid_ki = 1.659
|
||||
#*# pid_kd = 626.020
|
||||
Loading…
Reference in New Issue