51 lines
3.6 KiB
YAML
51 lines
3.6 KiB
YAML
switch_about: "A virtual network tool that will obtain an ip after startup. Devices under the same token will form a virtual local area network, and can use ip to communicate directly with each other."
|
|
switch_usage: "switch-desktop.exe <COMMAND>"
|
|
switch_start_about: "Start switch"
|
|
switch_token_help: "Using the same token, you can build a local area network. It is recommended to use a more complex token to avoid connecting to other people's local area network"
|
|
switch_name_help: "Give the device a name, the system version information will be used by default"
|
|
switch_device_id_help: "The unique identifier of the device, the ip is assigned according to the id, and the MAC address is used by default"
|
|
switch_server_help: "Registry and relay server address, public server is used by default"
|
|
switch_nat_test_server_help: "NAT detection server addresses, separated by commas"
|
|
switch_log_help: "Record the log, the output is in the '${home}/.switch_desktop' directory, it is not recommended to open it for long-term use"
|
|
switch_tap_help: "Use tap mode, tun mode will be used by default"
|
|
switch_in_ip_help: "Use when configuring point-to-network (IP proxy), --in-ip 192.168.10.0/24,10.26.0.3, which means it is allowed to receive data from the network segment 192.168.10.0/24 and forward it to 10.26.0.3"
|
|
switch_out_ip_help: "Use when configuring point-to-network, --out-ip 192.168.10.0/24,192.168.1.10, which means that the data with the target of 192.168.10.0/24 is allowed to be forwarded from the network card 192.168.1.10"
|
|
switch_password_help: "Client Data Encryption"
|
|
switch_simulate_multicast_help: "Simulate multicast. By default, multicast data will be sent as broadcast, which is more compatible, but it will cause traffic waste. After it is turned on, it will simulate real multicast data transmission"
|
|
switch_config_help: "Read configuration file"
|
|
switch_stop_about: "Stop background service"
|
|
switch_route_about: "View route"
|
|
switch_list_about: "View device list"
|
|
switch_list_all_help: "View full information"
|
|
switch_status_about: "View current device information"
|
|
switch_install_about: "Install windows service"
|
|
switch_path_help: "Service installation path, it is recommended to use an empty directory"
|
|
switch_auto_help: "Service starts automatically at boot"
|
|
switch_uninstall_about: "Uninstall windows service"
|
|
switch_config_about: "Change Windows Service Configuration"
|
|
|
|
switch_use_admin_print: "Please run with administrator privileges"
|
|
switch_use_root_print: "Please run with root privileges"
|
|
switch_service_not_start_print: "service not started"
|
|
switch_start_successfully_print: "Start successfully"
|
|
switch_start_failed_print: "Startup failed"
|
|
switch_service_not_stopped_print: "service not stopped"
|
|
switch_stopped_print: "stopped"
|
|
switch_server_already_installed_print: "service is installed"
|
|
|
|
|
|
switch_repeated_start_print: "cannot be restarted repeatedly"
|
|
|
|
switch_token_not_found_print: "missing token"
|
|
switch_token_cannot_be_empty_print: "token cannot be empty"
|
|
switch_token_cannot_exceed_64_print: "token cannot exceed 64 characters"
|
|
switch_device_id_is_empty_print: "The device id cannot be empty and the length cannot be greater than 64 characters"
|
|
switch_in_ips_example_print: "in_ips Parameter error Example:--in_ip 192.168.10.0/24,10.26.0.3"
|
|
switch_out_ips_example_print: "out_ips Parameter error Example:--out_ip 192.168.10.0/24,192.168.0.5"
|
|
switch_relay_server_address_error: "Wrong relay server address"
|
|
switch_nat_test_server_address_error: "NAT detection service address error"
|
|
switch_press_any_key_to_exit: "Press any key to exit"
|
|
|
|
switch_virtual_ip: "virtual ip"
|
|
switch_virtual_gateway: "virtual gateway"
|
|
switch_please_enter_the_command: "Please enter the command (Usage: list,route,status,exit,help):" |