调整说明

common/src/cli.rs

@@ -358,10 +358,10 @@ fn get_description(key: &str, language: &str) -> String {
         ("-o <out-ip>", ("配置点对网时使用,-o 192.168.0.0/24表示允许将数据转发到192.168.0.0/24,可指定多个网段", "Used when configuring point-to-point network, -o 192.168.0.0/24 allows forwarding data to 192.168.0.0/24, specify multiple subnets")),
         ("-w <password>", ("使用该密码生成的密钥对客户端数据进行加密,并且服务端无法解密,使用相同密码的客户端才能通信", "Encrypt client data with keys generated by this password, server cannot decrypt, clients must use the same password to communicate")),
         ("-W", ("加密当前客户端和服务端通信的数据,请留意服务端指纹是否正确", "Encrypt the data currently being communicated between the client and server, please pay attention to whether the server fingerprint is correct")),
-        ("-u <mtu>", ("自定义mtu(不加密默认为1450，加密默认为1410", "Customize MTU (1450 by default without encryption, 1410 with encryption)")),
+        ("-u <mtu>", ("自定义mtu(默认为1420)", "Customize MTU (default is 1420)")),
         ("-f <conf_file>", ("读取配置文件中的配置", "Read configuration from file")),
         ("--ip <ip>", ("指定虚拟ip,指定的ip不能和其他设备重复,必须有效并且在服务端所属网段下,默认情况由服务端分配", "Specify virtual IP, must be unique and valid within server subnet, by default allocated by server")),
-        ("--model <model>", ("加密模式(默认aes_gcm),可选值{}", "Encryption mode (default aes_gcm), options {}")),
+        ("--model <model>", ("加密模式(默认aes_gcm),可选值", "Encryption mode (default aes_gcm), options ")),
         ("--finger", ("增加数据指纹校验,可增加安全性,如果服务端开启指纹校验,则客户端也必须开启", "Add data fingerprint verification for increased security, client must enable if server does")),
         ("--punch <punch>", ("取值ipv4/ipv6/all,ipv4表示仅使用ipv4打洞", "Values ipv4/ipv6/all, ipv4 for IPv4 hole punching only")),
         ("--ports <port,port>", ("取值0~65535,指定本地监听的一组端口,默认监听两个随机端口,使用过多端口会增加网络负担", "Values 0~65535, specify a group of local listening ports, defaults to two random ports, using many ports increases network load")),
@@ -371,7 +371,7 @@ fn get_description(key: &str, language: &str) -> String {
         ("--use-channel <p2p>", ("使用通道 relay/p2p/all,默认两者都使用", "Use channel relay/p2p/all, defaults to using both")),
         ("--nic <tun0>", ("指定虚拟网卡名称", "Specify virtual network card name")),
         ("--packet-loss <0>", ("模拟丢包,取值0~1之间的小数,程序会按设定的概率主动丢包,可用于模拟弱网", "Simulate packet loss, value between 0 and 1, program actively drops packets based on set probability, useful for simulating weak networks")),
-        ("--packet-delay <0>", ("模拟丢包,取值0~1之间的小数,程序会按设定的概率主动丢包,可用于模拟弱网", "Simulate latency, integer, in milliseconds (ms). The program will delay sending packets according to the set value and can be used to simulate weak networks")),
+        ("--packet-delay <0>", ("模拟延迟,正整数,单位毫秒,程序将根据设定值延迟发送数据包,可用于模拟弱网", "Simulate latency, integer, in milliseconds (ms). The program will delay sending packets according to the set value and can be used to simulate weak networks")),
         ("--dns <host:port>", ("DNS服务器地址,可使用多个dns,不指定时使用系统解析", "DNS server address, can specify multiple DNS servers, defaults to system resolution if not specified")),
         ("--mapping <mapping>", ("端口映射,例如 --mapping udp:0.0.0.0:80-domain:80 映射目标是本地路由能访问的设备", "Port mapping, e.g., --mapping udp:0.0.0.0:80-domain:80 maps to a device accessible by local routing")),
         ("--compressor-all <lz4>", ("启用压缩,可选值lz4/zstd<,level>,level为压缩级别,例如 --compressor lz4 或--compressor zstd,10", "Enable compression, options lz4/zstd<,level>, level is compression level, e.g., --compressor lz4 or --compressor zstd,10")),
@@ -379,6 +379,7 @@ fn get_description(key: &str, language: &str) -> String {
         ("--compressor-zstd <zstd>", ("启用压缩,可选值zstd<,level>,level为压缩级别,例如 --compressor zstd,10", "Enable compression, options zstd<,level>, level is compression level, e.g., --compressor zstd,10")),
         ("--vnt-mapping <x>", ("vnt地址映射,例如 --vnt-mapping tcp:80-10.26.0.10:80 映射目标是vnt网络或其子网中的设备", "VNT address mapping, e.g., --vnt-mapping tcp:80-10.26.0.10:80 maps to a device in VNT network or its subnet")),
         ("--disable-stats", ("关闭流量统计", "Disable traffic statistics")),
+        ("--allow-wg", ("允许接入WireGuard客户端", "Allow access to WireGuard client")),
         ("--list", ("后台运行时,查看其他设备列表", "View list of other devices when running in background")),
         ("--all", ("后台运行时,查看其他设备完整信息", "View complete information of other devices when running in background")),
         ("--info", ("后台运行时,查看当前设备信息", "View information of current device when running in background")),
@@ -568,7 +569,10 @@ fn print_usage(program: &str, _opts: Options) {
         "  --disable-stats     {}",
         get_description("--disable-stats", &language)
     );
-    println!("  --allow-wg          允许接入WireGuard客户端");
+    println!(
+        "  --allow-wg          {}",
+        get_description("--allow-wg", &language)
+    );
     println!();
     #[cfg(feature = "command")]
     {