支持tap网卡,优化tun网卡配置

switch/packet/src/arp/arp.rs

@@ -0,0 +1,123 @@
+use std::fmt;
+
+/// 地址解析协议，由IP地址找到MAC地址
+/// https://www.ietf.org/rfc/rfc6747.txt
+/*
+   0      2       4         5          6      8      10  (字节)
+  +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+  | 硬件类型|协议类型|硬件地址长度|协议地址长度|操作类型|
+  |          源MAC地址                  |    源ip地址    |
+  |          目的MAC地址                 |   目的ip地址   |
+ */
+use crate::error::*;
+
+pub struct ArpPacket<B> {
+    buffer: B,
+}
+
+impl<B: AsRef<[u8]>> ArpPacket<B> {
+    pub fn unchecked(buffer: B) -> Self {
+        Self { buffer }
+    }
+    pub fn new(buffer: B) -> Result<Self> {
+        if buffer.as_ref().len() != 28 {
+            Err(Error::InvalidPacket)?
+        }
+        let packet = Self::unchecked(buffer);
+        Ok(packet)
+    }
+}
+
+impl<B: AsRef<[u8]>> ArpPacket<B> {
+    /// 硬件类型 以太网类型为1
+    pub fn hardware_type(&self) -> u16 {
+        u16::from_be_bytes(self.buffer.as_ref()[0..2].try_into().unwrap())
+    }
+    /// 上层协议类型,ipv4是0x0800
+    pub fn protocol_type(&self) -> u16 {
+        u16::from_be_bytes(self.buffer.as_ref()[2..4].try_into().unwrap())
+    }
+    /// 如果是MAC地址 则长度为6
+    pub fn hardware_size(&self) -> u8 {
+        self.buffer.as_ref()[4]
+    }
+    /// 如果是IPv4 则长度为4
+    pub fn protocol_size(&self) -> u8 {
+        self.buffer.as_ref()[5]
+    }
+    /// 操作类型，请求和响应 1：ARP请求，2：ARP响应，3：RARP请求，4：RARP响应
+    pub fn op_code(&self) -> u16 {
+        u16::from_be_bytes(self.buffer.as_ref()[6..8].try_into().unwrap())
+    }
+    /// 发送端硬件地址，仅支持以太网
+    pub fn sender_hardware_addr(&self) -> &[u8] {
+        &self.buffer.as_ref()[8..14]
+    }
+    /// 发送端协议地址，仅支持IPv4
+    pub fn sender_protocol_addr(&self) -> &[u8] {
+        &self.buffer.as_ref()[14..18]
+    }
+    /// 接收端硬件地址，仅支持以太网
+    pub fn target_hardware_addr(&self) -> &[u8] {
+        &self.buffer.as_ref()[18..24]
+    }
+    /// 接收端协议地址，仅支持IPv4
+    pub fn target_protocol_addr(&self) -> &[u8] {
+        &self.buffer.as_ref()[24..28]
+    }
+}
+
+impl<B: AsRef<[u8]> + AsMut<[u8]>> ArpPacket<B> {
+    /// 硬件类型 以太网类型为1
+    pub fn set_hardware_type(&mut self, value: u16) {
+        self.buffer.as_mut()[0..2].copy_from_slice(&value.to_be_bytes())
+    }
+    /// 上层协议类型,ipv4是0x0800
+    pub fn set_protocol_type(&mut self, value: u16) {
+        self.buffer.as_mut()[2..4].copy_from_slice(&value.to_be_bytes())
+    }
+    /// 如果是MAC地址 则长度为6
+    pub fn set_hardware_size(&mut self, value: u8) {
+        self.buffer.as_mut()[4] = value
+    }
+    /// 如果是IPv4 则长度为4
+    pub fn set_protocol_size(&mut self, value: u8) {
+        self.buffer.as_mut()[5] = value
+    }
+    /// 操作类型，请求和响应 1：ARP请求，2：ARP响应，3：RARP请求，4：RARP响应
+    pub fn set_op_code(&mut self, value: u16) {
+        self.buffer.as_mut()[6..8].copy_from_slice(&value.to_be_bytes())
+    }
+    /// 发送端硬件地址，仅支持以太网
+    pub fn set_sender_hardware_addr(&mut self, buf: &[u8]) {
+        self.buffer.as_mut()[8..14].copy_from_slice(buf)
+    }
+    /// 发送端协议地址，仅支持IPv4
+    pub fn set_sender_protocol_addr(&mut self, buf: &[u8]) {
+        self.buffer.as_mut()[14..18].copy_from_slice(buf)
+    }
+    /// 接收端硬件地址，仅支持以太网
+    pub fn set_target_hardware_addr(&mut self, buf: &[u8]) {
+        self.buffer.as_mut()[18..24].copy_from_slice(buf)
+    }
+    /// 接收端协议地址，仅支持IPv4
+    pub fn set_target_protocol_addr(&mut self, buf: &[u8]) {
+        self.buffer.as_mut()[24..28].copy_from_slice(buf)
+    }
+}
+
+impl<B: AsRef<[u8]>> fmt::Debug for ArpPacket<B> {
+    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
+        f.debug_struct("ArpPacket")
+            .field("hardware_type", &self.hardware_type())
+            .field("protocol_type", &self.protocol_type())
+            .field("hardware_size", &self.hardware_size())
+            .field("protocol_size", &self.protocol_size())
+            .field("op_code", &self.op_code())
+            .field("sender_hardware_addr", &self.sender_hardware_addr())
+            .field("sender_protocol_addr", &self.sender_protocol_addr())
+            .field("target_hardware_addr", &self.target_hardware_addr())
+            .field("target_protocol_addr", &self.target_protocol_addr())
+            .finish()
+    }
+}

switch/packet/src/arp/mod.rs

@@ -0,0 +1 @@
+pub mod arp;