/* Move registers around to reduce number of move instructions needed. Copyright (C) 1987, 88, 89, 92-98, 1999 Free Software Foundation, Inc. This file is part of GNU CC. GNU CC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU CC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* This module looks for cases where matching constraints would force an instruction to need a reload, and this reload would be a register to register move. It then attempts to change the registers used by the instruction to avoid the move instruction. */ #include "config.h" #include "system.h" #include "rtl.h" /* stdio.h must precede rtl.h for FFS. */ #include "insn-config.h" #include "recog.h" #include "output.h" #include "reload.h" #include "regs.h" #include "hard-reg-set.h" #include "flags.h" #include "expr.h" #include "insn-flags.h" #include "basic-block.h" #include "toplev.h" /* CYGNUS LOCAL SH4-OPT */ #include "obstack.h" /* END CYGNUS LOCAL */ static int optimize_reg_copy_1 PROTO((rtx, rtx, rtx)); static void optimize_reg_copy_2 PROTO((rtx, rtx, rtx)); static void optimize_reg_copy_3 PROTO((rtx, rtx, rtx)); static rtx gen_add3_insn PROTO((rtx, rtx, rtx)); static void copy_src_to_dest PROTO((rtx, rtx, rtx, int, int)); static int *regmove_bb_head; struct match { int with[MAX_RECOG_OPERANDS]; enum { READ, WRITE, READWRITE } use[MAX_RECOG_OPERANDS]; int commutative[MAX_RECOG_OPERANDS]; int early_clobber[MAX_RECOG_OPERANDS]; }; static int try_auto_increment PROTO((rtx, rtx, rtx, rtx, HOST_WIDE_INT, int)); static int find_matches PROTO((rtx, struct match *)); static int fixup_match_1 PROTO((rtx, rtx, rtx, rtx, rtx, int, int, int, FILE *)) ; static int reg_is_remote_constant_p PROTO((rtx, rtx, rtx)); static int stable_but_for_p PROTO((rtx, rtx, rtx)); static int regclass_compatible_p PROTO((int, int)); /* CYGNUS LOCAL SH4-OPT */ static struct rel_use *lookup_related PROTO((int, enum reg_class, HOST_WIDE_INT)); static void rel_build_chain PROTO((struct rel_use *, struct rel_use *, int)); static void rel_record_mem PROTO((rtx *, rtx, int, int, int, rtx, int, int)); static void invalidate_related PROTO((rtx, int)); static void find_related PROTO((rtx *, rtx, int, int)); static int chain_starts_earlier PROTO((const GENERIC_PTR, const GENERIC_PTR)); static int chain_ends_later PROTO((const GENERIC_PTR, const GENERIC_PTR)); static struct related *optimize_related_values_1 PROTO((struct related *, int, int, rtx, FILE *)); static void optimize_related_values_0 PROTO((struct related *, int, int, rtx, FILE *)); static void optimize_related_values PROTO((int, FILE *)); static void count_sets PROTO((rtx, rtx)); /* END CYGNUS LOCAL */ static int loop_depth; /* Return non-zero if registers with CLASS1 and CLASS2 can be merged without causing too much register allocation problems. */ static int regclass_compatible_p (class0, class1) int class0, class1; { return (class0 == class1 || (reg_class_subset_p (class0, class1) && ! CLASS_LIKELY_SPILLED_P (class0)) || (reg_class_subset_p (class1, class0) && ! CLASS_LIKELY_SPILLED_P (class1))); } /* Generate and return an insn body to add r1 and c, storing the result in r0. */ static rtx gen_add3_insn (r0, r1, c) rtx r0, r1, c; { /* CYGNUS LOCAL sh4-opt/amylaar */ int icode = (int) add_optab->handlers[(int) GET_MODE (r0)].insn_code; int mcode; rtx s; if (icode == CODE_FOR_nothing || ! (*insn_operand_predicate[icode][0])(r0, insn_operand_mode[icode][0])) return NULL_RTX; if ((*insn_operand_predicate[icode][1])(r1, insn_operand_mode[icode][1]) && (*insn_operand_predicate[icode][2])(c, insn_operand_mode[icode][2])) return (GEN_FCN (icode) (r0, r1, c)); mcode = (int) mov_optab->handlers[(int) GET_MODE (r0)].insn_code; if (REGNO (r0) == REGNO (r1) || ! (*insn_operand_predicate[icode][1])(r0, insn_operand_mode[icode][1]) || ! (*insn_operand_predicate[icode][2])(r1, insn_operand_mode[icode][2]) || ! (*insn_operand_predicate[mcode][0])(r0, insn_operand_mode[mcode][0]) || ! (*insn_operand_predicate[mcode][1])(c, insn_operand_mode[mcode][1])) return NULL_RTX; start_sequence (); emit_insn (GEN_FCN (mcode) (r0, c)); emit_insn (GEN_FCN (icode) (r0, r0, r1)); s = gen_sequence (); end_sequence (); return s; /* END CYGNUS LOCAL */ } /* INC_INSN is an instruction that adds INCREMENT to REG. Try to fold INC_INSN as a post/pre in/decrement into INSN. Iff INC_INSN_SET is nonzero, inc_insn has a destination different from src. Return nonzero for success. */ static int try_auto_increment (insn, inc_insn, inc_insn_set, reg, increment, pre) rtx reg, insn, inc_insn ,inc_insn_set; HOST_WIDE_INT increment; int pre; { enum rtx_code inc_code; rtx pset = single_set (insn); if (pset) { /* Can't use the size of SET_SRC, we might have something like (sign_extend:SI (mem:QI ... */ rtx use = find_use_as_address (pset, reg, 0); if (use != 0 && use != (rtx) 1) { int size = GET_MODE_SIZE (GET_MODE (use)); if (0 || (HAVE_POST_INCREMENT && pre == 0 && (inc_code = POST_INC, increment == size)) || (HAVE_PRE_INCREMENT && pre == 1 && (inc_code = PRE_INC, increment == size)) || (HAVE_POST_DECREMENT && pre == 0 && (inc_code = POST_DEC, increment == -size)) || (HAVE_PRE_DECREMENT && pre == 1 && (inc_code = PRE_DEC, increment == -size)) ) { if (inc_insn_set) validate_change (inc_insn, &SET_SRC (inc_insn_set), XEXP (SET_SRC (inc_insn_set), 0), 1); validate_change (insn, &XEXP (use, 0), gen_rtx_fmt_e (inc_code, Pmode, reg), 1); if (apply_change_group ()) { REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_INC, reg, REG_NOTES (insn)); if (! inc_insn_set) { PUT_CODE (inc_insn, NOTE); NOTE_LINE_NUMBER (inc_insn) = NOTE_INSN_DELETED; NOTE_SOURCE_FILE (inc_insn) = 0; } return 1; } } } } return 0; } /* CYGNUS LOCAL SH4-OPT */ #ifdef AUTO_INC_DEC #ifdef REGISTER_CONSTRAINTS /* Some machines have two-address-adds and instructions that can use only register-indirect addressing and auto_increment, but no offsets. If multiple fields of a struct are accessed more than once, cse will load each of the member addresses in separate registers. This not only costs a lot of registers, but also of instructions, since each add to initialize an address register must be really expanded into a register-register move followed by an add. regmove_optimize uses some heuristics to detect this case; if these indicate that this is likely, optimize_related_values is run once for the entire function. We build chains of uses of related values that can be satisfied with the same base register by taking advantage of auto-increment address modes instead of explicit add instructions. We try to link chains with disjoint lifetimes together to reduce the number of temporary registers and register-register copies. This optimization pass operates on basic blocks one at a time; it could be extended to work on extended basic blocks or entire functions. */ /* For each set of values related to a common base register, we use a hash table which maps constant offsets to instructions. The instructions mapped to are those that use a register which may, (possibly with a change in addressing mode) differ from the initial value of the base register by exactly that offset after the execution of the instruction. Here we define the size of the hash table, and the hash function to use. */ #define REL_USE_HASH_SIZE 43 #define REL_USE_HASH(I) ((I) % (unsigned HOST_WIDE_INT) REL_USE_HASH_SIZE) /* For each register in a set of registers that are related, we keep a struct related. u.base contains the register number of the base register (i.e. the one that was the source of the first three-address add for this set of related values). INSN is the instruction that initialized the register, or, for the base, the instruction that initialized the first non-base register. BASE is the register number of the base register. For the base register only, the member BASEINFO points to some extra data. 'luid' here means linear uid. We count them starting at the function start; they are used to avoid overlapping lifetimes. UPDATES is a list of instructions that set the register to a new value that is still related to the same base. When a register in a set of related values is set to something that is not related to the base, INVALIDATE_LUID is set to the luid of the instruction that does this set. This is used to avoid re-using this register in an overlapping liftime for a related value. DEATH is first used to store the insn (if any) where the register dies. When the optimization is actually performed, the REG_DEAD note from the insn denoted by DEATH is removed. Thereafter, the removed death note is stored in DEATH, marking not only that the register dies, but also making the note available for reuse. We also use a struct related to keep track of registers that have been used for anything that we don't recognize as related values. The only really interesting datum for these is u.last_luid, which is the luid of the last reference we have seen. These struct relateds are marked by a zero INSN field; most other members are not used and remain uninitialized. */ struct related { rtx insn, reg; union { int base; int last_luid; } u; HOST_WIDE_INT offset; struct related *prev; struct update *updates; struct related_baseinfo *baseinfo; int invalidate_luid; rtx death; int reg_orig_calls_crossed, reg_set_call_tally, reg_orig_refs; }; /* HASHTAB maps offsets to register uses with a matching MATCH_OFFSET. PREV_BASE points to the struct related for the previous base register that we currently keep track of. INSN_LUID is the luid of the instruction that started this set of related values. */ struct related_baseinfo { struct rel_use *hashtab[REL_USE_HASH_SIZE]; struct rel_use_chain *chains; struct related *prev_base; int insn_luid; }; /* INSN is an instruction that sets a register that previously contained a related value to a new value that is related to the same base register. When the optimization is performed, we have to delete INSN. DEATH_INSN points to the insn (if any) where the register died that we set in INSN. When we perform the optimization, the REG_DEAD note has to be removed from DEATH_INSN. PREV points to the struct update that pertains to the previous instruction pertaining to the same register that set it from one related value to another one. */ struct update { rtx insn, death_insn; struct update *prev; }; struct rel_use_chain { struct rel_use *chain; /* Points to first use in this chain. */ struct rel_use_chain *prev, *linked; /* Only set after the chain has been completed: */ struct rel_use *end; /* Last use in this chain. */ int start_luid, end_luid, calls_crossed; rtx reg; /* The register allocated for this chain. */ HOST_WIDE_INT match_offset; /* Offset after execution of last insn. */ }; /* ADDRP points to the place where the actual use of the related value is. This is commonly a memory address, and has to be set to a register or some auto_inc addressing of this register. But ADDRP is also used for all other uses of related values to the place where the register is inserted; we can tell that an unardorned register is to be inserted because no offset adjustment is required, hence this is handled by the same logic as register-indirect addressing. The only exception to this is when SET_IN_PARALLEL is set, see below. OFFSET is the offset that is actually used in this instance, i.e. the value of the base register when the set of related values was created plus OFFSET yields the value that is used. This might be different from the value of the used register before executing INSN if we elected to use pre-{in,de}crement addressing. If we have the option to use post-{in,d})crement addressing, all choices are linked cyclically together with the SIBLING field. Otherwise, it's a one-link-cycle, i.e. SIBLING points at the struct rel_use it is a member of. MATCH_OFFSET is the offset that is available after the execution of INSN. It is the same as OFFSET for straight register-indirect addressing and for pre-{in,de}crement addressing, while it differs for the post-{in,de}crement addressing modes. If SET_IN_PARALLEL is set, MATCH_OFFSET differs from OFFSET, yet this is no post-{in,de}crement addresing. Rather, it is a set inside a PARALLEL that adds some constant to a register that holds one value of a set of related values that we keep track of. ADDRP then points only to the set destination of this set; another struct rel_use is used for the source of the set. */ struct rel_use { rtx insn, *addrp; int luid, call_tally; enum reg_class class; int set_in_parallel : 1; HOST_WIDE_INT offset, match_offset; struct rel_use *next_chain, **prev_chain_ref, *next_hash, *sibling; }; struct related **regno_related, *rel_base_list, *unrelatedly_used; #define rel_alloc(N) obstack_alloc(&related_obstack, (N)) #define rel_new(X) ((X) = rel_alloc (sizeof *(X))) static struct obstack related_obstack; /* For each integer machine mode, the minimum and maximum constant that can be added with a single constant. This is supposed to define an interval around zero; if there are singular points disconnected from this interval, we want to leave them out. */ static HOST_WIDE_INT add_limits[NUM_MACHINE_MODES][2]; /* Try to find a related value with offset OFFSET from the base register belonging to REGNO, using a register with preferred class that is compatible with CLASS. */ static struct rel_use * lookup_related (regno, class, offset) int regno; enum reg_class class; HOST_WIDE_INT offset; { int base = regno_related[regno]->u.base; int hash = REL_USE_HASH (offset); struct rel_use *match = regno_related[base]->baseinfo->hashtab[hash]; for (; match; match = match->next_hash) { if (offset != match->match_offset) continue; if (match->next_chain) continue; if (regclass_compatible_p (class, match->class)) break; } return match; } /* Add NEW_USE at the end of the chain that currently ends with MATCH; If MATCH is not set, create a new chain. BASE is the base register number the chain belongs to. */ static void rel_build_chain (new_use, match, base) struct rel_use *new_use, *match; int base; { int hash; if (match) { struct rel_use *sibling = match; do { sibling->next_chain = new_use; if (sibling->prev_chain_ref) *sibling->prev_chain_ref = match; sibling = sibling->sibling; } while (sibling != match); new_use->prev_chain_ref = &match->next_chain; new_use->next_chain = 0; } else { struct rel_use_chain *new_chain; rel_new (new_chain); new_chain->chain = new_use; new_use->prev_chain_ref = &new_chain->chain; new_use->next_chain = 0; new_use->next_chain = NULL_PTR; new_chain->linked = 0; new_chain->prev = regno_related[base]->baseinfo->chains; regno_related[base]->baseinfo->chains = new_chain; } hash = REL_USE_HASH (new_use->offset); new_use->next_hash = regno_related[base]->baseinfo->hashtab[hash]; regno_related[base]->baseinfo->hashtab[hash] = new_use; } /* Record the use of register ADDR in a memory reference. ADDRP is the memory location where the address is stored. SIZE is the size of the memory reference. PRE_OFFS is the offset that has to be added to the value in ADDR due to PRE_{IN,DE}CREMENT addressing in the original address; likewise, POST_OFFSET denotes POST_{IN,DE}CREMENT addressing. INSN is the instruction that uses this address, LUID its luid, and CALL_TALLY the current number of calls encountered since the start of the function. */ static void rel_record_mem (addrp, addr, size, pre_offs, post_offs, insn, luid, call_tally) rtx *addrp, addr, insn; int size, pre_offs, post_offs; int luid, call_tally; { static rtx auto_inc; rtx orig_addr = *addrp; int regno, base; HOST_WIDE_INT offset; struct rel_use *new_use, *match; enum reg_class class; int hash; if (GET_CODE (addr) != REG) abort (); regno = REGNO (addr); if (! regno_related[regno] || ! regno_related[regno]->insn || regno_related[regno]->invalidate_luid) return; regno_related[regno]->reg_orig_refs += loop_depth; offset = regno_related[regno]->offset += pre_offs; base = regno_related[regno]->u.base; if (! auto_inc) { push_obstacks_nochange (); end_temporary_allocation (); auto_inc = gen_rtx_PRE_INC (Pmode, addr); pop_obstacks (); } XEXP (auto_inc, 0) = addr; *addrp = auto_inc; rel_new (new_use); new_use->insn = insn; new_use->addrp = addrp; new_use->luid = luid; new_use->call_tally = call_tally; new_use->class = class = reg_preferred_class (regno); new_use->set_in_parallel = 0; new_use->offset = offset; new_use->match_offset = offset; new_use->sibling = new_use; do { match = lookup_related (regno, class, offset); if (! match) { /* We can choose PRE_{IN,DE}CREMENT on the spot with the information we have gathered about the preceding instructions, while we have to record POST_{IN,DE}CREMENT possibilities so that we can check later if we have a use for their output value. */ /* We use recog here directly because we are only testing here if the changes could be made, but don't really want to make a change right now. The caching from recog_memoized would only get in the way. */ match = lookup_related (regno, class, offset - size); if (HAVE_PRE_INCREMENT && match) { PUT_CODE (auto_inc, PRE_INC); if (recog (PATTERN (insn), insn, NULL_PTR) >= 0) break; } match = lookup_related (regno, class, offset + size); if (HAVE_PRE_DECREMENT && match) { PUT_CODE (auto_inc, PRE_DEC); if (recog (PATTERN (insn), insn, NULL_PTR) >= 0) break; } match = 0; } PUT_CODE (auto_inc, POST_INC); if (HAVE_POST_INCREMENT && recog (PATTERN (insn), insn, NULL_PTR) >= 0) { struct rel_use *inc_use; rel_new (inc_use); *inc_use = *new_use; inc_use->sibling = new_use; new_use->sibling = inc_use; inc_use->prev_chain_ref = NULL_PTR; inc_use->next_chain = NULL_PTR; hash = REL_USE_HASH (inc_use->match_offset = offset + size); inc_use->next_hash = regno_related[base]->baseinfo->hashtab[hash]; regno_related[base]->baseinfo->hashtab[hash] = inc_use; } PUT_CODE (auto_inc, POST_DEC); if (HAVE_POST_DECREMENT && recog (PATTERN (insn), insn, NULL_PTR) >= 0) { struct rel_use *dec_use; rel_new (dec_use); *dec_use = *new_use; dec_use->sibling = new_use->sibling; new_use->sibling = dec_use; dec_use->prev_chain_ref = NULL_PTR; dec_use->next_chain = NULL_PTR; hash = REL_USE_HASH (dec_use->match_offset = offset + size); dec_use->next_hash = regno_related[base]->baseinfo->hashtab[hash]; regno_related[base]->baseinfo->hashtab[hash] = dec_use; } } while (0); rel_build_chain (new_use, match, base); *addrp = orig_addr; regno_related[regno]->offset += post_offs; } /* Note that REG is set to something that we do not regognize as a related value, at an insn with linear uid LUID. */ static void invalidate_related (reg, luid) rtx reg; int luid; { int regno = REGNO (reg); struct related *rel = regno_related[regno]; if (! rel) { rel_new (rel); regno_related[regno] = rel; rel->prev = unrelatedly_used; unrelatedly_used = rel; rel->reg = reg; rel->insn = NULL_RTX; rel->invalidate_luid = 0; rel->u.last_luid = luid; } else if (rel->invalidate_luid) ; /* do nothing */ else if (! rel->insn) rel->u.last_luid = luid; else rel->invalidate_luid = luid; } /* Check the RTL fragment pointed to by XP for related values - that is, if any new are created, or if they are assigned new values. Also note any other sets so that we can track lifetime conflicts. INSN is the instruction XP points into, LUID its luid, and CALL_TALLY the number of preceding calls in the function. */ static void find_related (xp, insn, luid, call_tally) rtx *xp, insn; int luid, call_tally; { rtx x = *xp; enum rtx_code code = GET_CODE (x); char *fmt; int i; switch (code) { case SET: { rtx dst = SET_DEST (x); rtx src = SET_SRC (x); /* First, check out if this sets a new related value. We don't care about register class differences here, since we might still find multiple related values share the same class even if it is disjunct from the class of the original register. We use a do .. while (0); here because there are many possible conditions that make us want to handle this like an ordinary set. */ do { rtx src_reg, src_const; int src_regno, dst_regno; struct related *new_related; /* First check that we have actually something like (set (reg pseudo_dst) (plus (reg pseudo_src) (const_int))) . */ if (GET_CODE (src) != PLUS) break; src_reg = XEXP (src, 0); src_const = XEXP (src, 1); if (GET_CODE (src_reg) != REG || GET_CODE (src_const) != CONST_INT || GET_CODE (dst) != REG) break; dst_regno = REGNO (dst); src_regno = REGNO (src_reg); if (src_regno < FIRST_PSEUDO_REGISTER || dst_regno < FIRST_PSEUDO_REGISTER) break; /* We only know how to remove the set if that is all what the insn does. */ if (x != single_set (insn)) break; /* We cannot handle multiple lifetimes. */ if ((regno_related[src_regno] && regno_related[src_regno]->invalidate_luid) || (regno_related[dst_regno] && regno_related[dst_regno]->invalidate_luid)) break; /* Check if this is merely an update of a register with a value belonging to a group of related values we already track. */ if (regno_related[dst_regno] && regno_related[dst_regno]->insn) { struct update *new_update; /* If the base register changes, don't handle this as a related value. We can currently only attribute the register to one base, and keep record of one lifetime during which we might re-use the register. */ if (! regno_related[src_regno] || ! regno_related[src_regno]->insn ||(regno_related[dst_regno]->u.base != regno_related[src_regno]->u.base)) break; regno_related[src_regno]->reg_orig_refs += loop_depth; regno_related[dst_regno]->reg_orig_refs += loop_depth; regno_related[dst_regno]->offset = regno_related[src_regno]->offset + INTVAL (XEXP (src, 1)); rel_new (new_update); new_update->insn = insn; new_update->death_insn = regno_related[dst_regno]->death; regno_related[dst_regno]->death = NULL_RTX; new_update->prev = regno_related[dst_regno]->updates; regno_related[dst_regno]->updates = new_update; return; } if (! regno_related[src_regno] || ! regno_related[src_regno]->insn) { if (src_regno == dst_regno) break; rel_new (new_related); new_related->reg = src_reg; new_related->insn = insn; new_related->updates = 0; new_related->reg_set_call_tally = call_tally; new_related->reg_orig_refs = loop_depth; new_related->u.base = src_regno; new_related->offset = 0; new_related->prev = 0; new_related->invalidate_luid = 0; new_related->death = NULL_RTX; rel_new (new_related->baseinfo); bzero ((char *) new_related->baseinfo, sizeof *new_related->baseinfo); new_related->baseinfo->prev_base = rel_base_list; rel_base_list = new_related; new_related->baseinfo->insn_luid = luid; regno_related[src_regno] = new_related; } /* If the destination register has been used since we started tracking this group of related values, there would be tricky lifetime problems that we don't want to tackle right now. */ else if (regno_related[dst_regno] && (regno_related[dst_regno]->u.last_luid >= regno_related[regno_related[src_regno]->u.base]->baseinfo->insn_luid)) break; rel_new (new_related); new_related->reg = dst; new_related->insn = insn; new_related->updates = 0; new_related->reg_set_call_tally = call_tally; new_related->reg_orig_refs = loop_depth; new_related->u.base = regno_related[src_regno]->u.base; new_related->offset = regno_related[src_regno]->offset + INTVAL (XEXP (src, 1)); new_related->invalidate_luid = 0; new_related->death = NULL_RTX; new_related->prev = regno_related[src_regno]->prev; regno_related[src_regno]->prev = new_related; regno_related[dst_regno] = new_related; return; } while (0); /* The SET has not been recognized as setting up a related value. If the destination is ultimately a register, we have to invalidate what we have memorized about any related value previously stored into it. */ while (GET_CODE (dst) == SUBREG || GET_CODE (dst) == ZERO_EXTRACT || GET_CODE (dst) == SIGN_EXTRACT || GET_CODE (dst) == STRICT_LOW_PART) dst = XEXP (dst, 0); if (GET_CODE (dst) == REG) { find_related (&SET_SRC (x), insn, luid, call_tally); invalidate_related (dst, luid); return; } break; } case CLOBBER: { rtx dst = XEXP (x, 0); while (GET_CODE (dst) == SUBREG || GET_CODE (dst) == ZERO_EXTRACT || GET_CODE (dst) == SIGN_EXTRACT || GET_CODE (dst) == STRICT_LOW_PART) dst = XEXP (dst, 0); if (GET_CODE (dst) == REG) { int regno = REGNO (dst); struct related *rel = regno_related[regno]; /* If this clobbers a register that belongs to a set of related values, we have to check if the same register appears somewhere else in the insn : this is then likely to be a match_dup. */ if (rel && rel->insn && ! rel->invalidate_luid && xp != &PATTERN (insn) && count_occurrences (PATTERN (insn), dst) > 1) { enum reg_class class = reg_preferred_class (regno); struct rel_use *new_use, *match; HOST_WIDE_INT offset = rel->offset; rel_new (new_use); new_use->insn = insn; new_use->addrp = &XEXP (x, 0); new_use->luid = luid; new_use->call_tally = call_tally; new_use->class = class; new_use->set_in_parallel = 1; new_use->sibling = new_use; do { new_use->match_offset = new_use->offset = offset; match = lookup_related (regno, class, offset); offset++; } while (! match || match->luid != luid); rel_build_chain (new_use, match, rel->u.base); /* Prevent other registers from using the same chain. */ new_use->next_chain = new_use; } invalidate_related (dst, luid); return; } break; } case REG: { int regno = REGNO (x); if (! regno_related[regno]) { rel_new (regno_related[regno]); regno_related[regno]->prev = unrelatedly_used; unrelatedly_used = regno_related[regno]; regno_related[regno]->reg = x; regno_related[regno]->insn = NULL_RTX; regno_related[regno]->u.last_luid = luid; } else if (! regno_related[regno]->insn) regno_related[regno]->u.last_luid = luid; else if (! regno_related[regno]->invalidate_luid) { struct rel_use *new_use, *match; HOST_WIDE_INT offset; int base; enum reg_class class; regno_related[regno]->reg_orig_refs += loop_depth; offset = regno_related[regno]->offset; base = regno_related[regno]->u.base; rel_new (new_use); new_use->insn = insn; new_use->addrp = xp; new_use->luid = luid; new_use->call_tally = call_tally; new_use->class = class = reg_preferred_class (regno); new_use->set_in_parallel = 0; new_use->offset = offset; new_use->match_offset = offset; new_use->sibling = new_use; match = lookup_related (regno, class, offset); rel_build_chain (new_use, match, base); } return; } case MEM: { int size = GET_MODE_SIZE (GET_MODE (x)); rtx *addrp= &XEXP (x, 0), addr = *addrp; switch (GET_CODE (addr)) { case REG: rel_record_mem (addrp, addr, size, 0, 0, insn, luid, call_tally); return; case PRE_INC: rel_record_mem (addrp, XEXP (addr, 0), size, size, 0, insn, luid, call_tally); return; case POST_INC: rel_record_mem (addrp, XEXP (addr, 0), size, 0, size, insn, luid, call_tally); return; case PRE_DEC: rel_record_mem (addrp, XEXP (addr, 0), size, -size, 0, insn, luid, call_tally); return; case POST_DEC: rel_record_mem (addrp, XEXP (addr, 0), size, 0, -size, insn, luid, call_tally); return; default: break; } break; } case PARALLEL: { for (i = XVECLEN (x, 0) - 1; i >= 0; i--) { rtx *yp = &XVECEXP (x, 0, i); rtx y = *yp; if (GET_CODE (y) == SET) { rtx dst; find_related (&SET_SRC (y), insn, luid, call_tally); dst = SET_DEST (y); while (GET_CODE (dst) == SUBREG || GET_CODE (dst) == ZERO_EXTRACT || GET_CODE (dst) == SIGN_EXTRACT || GET_CODE (dst) == STRICT_LOW_PART) dst = XEXP (dst, 0); if (GET_CODE (dst) != REG) find_related (&SET_DEST (y), insn, luid, call_tally); } else if (GET_CODE (y) != CLOBBER) find_related (yp, insn, luid, call_tally); } for (i = XVECLEN (x, 0) - 1; i >= 0; i--) { rtx *yp = &XVECEXP (x, 0, i); rtx y = *yp; if (GET_CODE (y) == SET) { rtx *dstp; dstp = &SET_DEST (y); while (GET_CODE (*dstp) == SUBREG || GET_CODE (*dstp) == ZERO_EXTRACT || GET_CODE (*dstp) == SIGN_EXTRACT || GET_CODE (*dstp) == STRICT_LOW_PART) dstp = &XEXP (*dstp, 0); if (GET_CODE (*dstp) == REG) { int regno = REGNO (*dstp); rtx src = SET_SRC (y); if (regno_related[regno] && regno_related[regno]->insn && GET_CODE (src) == PLUS && XEXP (src, 0) == *dstp && GET_CODE (XEXP (src, 1)) == CONST_INT) { struct rel_use *new_use, *match; enum reg_class class; regno_related[regno]->reg_orig_refs += loop_depth; rel_new (new_use); new_use->insn = insn; new_use->addrp = dstp; new_use->luid = luid; new_use->call_tally = call_tally; new_use->class = class = reg_preferred_class (regno); new_use->set_in_parallel = 1; new_use->offset = regno_related[regno]->offset; new_use->match_offset = regno_related[regno]->offset += INTVAL (XEXP (src, 1)); new_use->sibling = new_use; match = lookup_related (regno, class, new_use->offset); rel_build_chain (new_use, match, regno_related[regno]->u.base); } else invalidate_related (*dstp, luid); } } else if (GET_CODE (y) == CLOBBER) find_related (yp, insn, luid, call_tally); } return; } default: break; } fmt = GET_RTX_FORMAT (code); for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) { if (fmt[i] == 'e') find_related (&XEXP (x, i), insn, luid, call_tally); if (fmt[i] == 'E') { register int j; for (j = 0; j < XVECLEN (x, i); j++) find_related (&XVECEXP (x, i, j), insn, luid, call_tally); } } } /* Comparison functions for qsort. */ static int chain_starts_earlier (chain1, chain2) const GENERIC_PTR chain1; const GENERIC_PTR chain2; { int d = ((*(struct rel_use_chain **)chain2)->start_luid - (*(struct rel_use_chain **)chain1)->start_luid); if (! d) d = ((*(struct rel_use_chain **)chain2)->chain->offset - (*(struct rel_use_chain **)chain1)->chain->offset); if (! d) d = ((*(struct rel_use_chain **)chain2)->chain->set_in_parallel - (*(struct rel_use_chain **)chain1)->chain->set_in_parallel); /* If set_in_parallel is not set on both chain's first use, they must differ in start_luid or offset, since otherwise they would use the same chain. Thus the remaining problem is with set_in_parallel uses; for these, we know that *addrp is a register. Since the same register may not be set multiple times in the same insn, the registers must be different. */ if (! d) d = (REGNO (*(*(struct rel_use_chain **)chain2)->chain->addrp) - REGNO (*(*(struct rel_use_chain **)chain1)->chain->addrp)); return d; } static int chain_ends_later (chain1, chain2) const GENERIC_PTR chain1; const GENERIC_PTR chain2; { int d = ((*(struct rel_use_chain **)chain1)->end_luid - (*(struct rel_use_chain **)chain2)->end_luid); if (! d) d = ((*(struct rel_use_chain **)chain2)->chain->offset - (*(struct rel_use_chain **)chain1)->chain->offset); if (! d) d = ((*(struct rel_use_chain **)chain2)->chain->set_in_parallel - (*(struct rel_use_chain **)chain1)->chain->set_in_parallel); /* If set_in_parallel is not set on both chain's first use, they must differ in start_luid or offset, since otherwise they would use the same chain. Thus the remaining problem is with set_in_parallel uses; for these, we know that *addrp is a register. Since the same register may not be set multiple times in the same insn, the registers must be different. */ if (! d) d = (REGNO (*(*(struct rel_use_chain **)chain2)->chain->addrp) - REGNO (*(*(struct rel_use_chain **)chain1)->chain->addrp)); return d; } static void count_sets (x, pat) rtx x, pat; { if (GET_CODE (x) == REG) REG_N_SETS (REGNO (x))++; } /* Perform the optimization for a single set of related values. INSERT_AFTER is an instruction after which we may emit instructions to initialize registers that remain live beyond the end of the group of instructions which have been examined. */ static struct related * optimize_related_values_1 (rel_base, luid, call_tally, insert_after, regmove_dump_file) struct related *rel_base; int luid, call_tally; rtx insert_after; FILE *regmove_dump_file; { struct related_baseinfo *baseinfo = rel_base->baseinfo; struct related *rel; struct rel_use_chain *chain, *chain0, **chain_starttab, **chain_endtab; struct rel_use_chain **pred_chainp, *pred_chain, *last_init_chain; int num_regs, num_av_regs, num_chains, num_linked, max_end_luid, i; struct rel_use_chain *rel_base_reg_user; int mode; HOST_WIDE_INT rel_base_reg_user_offset = 0; /* For any registers that are still live, we have to arrange to have them set to their proper values. Also count with how many registers (not counting base) we are dealing with here. */ for (num_regs = -1, rel = rel_base; rel; rel = rel->prev, num_regs++) { int regno = REGNO (rel->reg); if (! rel->death && ! rel->invalidate_luid) { enum reg_class class = reg_preferred_class (regno); struct rel_use *new_use, *match; rel_new (new_use); new_use->insn = NULL_RTX; new_use->addrp = &rel->reg; new_use->luid = luid; new_use->call_tally = call_tally; new_use->class = class; new_use->set_in_parallel = 1; new_use->match_offset = new_use->offset = rel->offset; new_use->sibling = new_use; match = lookup_related (regno, class, rel->offset); rel_build_chain (new_use, match, REGNO (rel_base->reg)); /* Prevent other registers from using the same chain. */ new_use->next_chain = new_use; } if (! rel->death) rel->reg_orig_calls_crossed = call_tally - rel->reg_set_call_tally; } /* Now for every chain of values related to the base, set start and end luid, match_offset, and reg. Also count the number of these chains, and determine the largest end luid. */ num_chains = 0; for (max_end_luid = 0, chain = baseinfo->chains; chain; chain = chain->prev) { struct rel_use *use, *next; num_chains++; next = chain->chain; chain->start_luid = next->luid; do { use = next; next = use->next_chain; } while (next && next != use); use->next_chain = 0; chain->end = use; chain->end_luid = use->luid; chain->match_offset = use->match_offset; chain->calls_crossed = use->call_tally - chain->chain->call_tally; chain->reg = use->insn ? NULL_RTX : *use->addrp; if (use->luid > max_end_luid) max_end_luid = use->luid; if (regmove_dump_file) fprintf (regmove_dump_file, "Chain start: %d end: %d\n", chain->start_luid, chain->end_luid); } if (regmove_dump_file) fprintf (regmove_dump_file, "Insn %d reg %d: found %d chains.\n", INSN_UID (rel_base->insn), REGNO (rel_base->reg), num_chains); /* For every chain, we try to find another chain the lifetime of which ends before the lifetime of said chain starts. So we first sort according to luid of first and last instruction that is in the chain, respectively; this is O(n * log n) on average. */ chain_starttab = rel_alloc (num_chains * sizeof *chain_starttab); chain_endtab = rel_alloc (num_chains * sizeof *chain_starttab); for (chain = baseinfo->chains, i = 0; chain; chain = chain->prev, i++) { chain_starttab[i] = chain; chain_endtab[i] = chain; } qsort (chain_starttab, num_chains, sizeof *chain_starttab, chain_starts_earlier); qsort (chain_endtab, num_chains, sizeof *chain_endtab, chain_ends_later); /* Now we go through every chain, starting with the one that starts second (we can skip the first because we know there would be no match), and check it against the chain that ends first. */ /* ??? We assume here that reg_class_compatible_p will seldom return false. If that is not true, we should do a more thorough search for suitable chain combinations. */ pred_chainp = chain_endtab; pred_chain = *pred_chainp; for (num_linked = 0, i = num_chains - 2; i >= 0; i--) { struct rel_use_chain *succ_chain = chain_starttab[i]; if (succ_chain->start_luid > pred_chain->end_luid && (pred_chain->calls_crossed ? succ_chain->calls_crossed : succ_chain->end->call_tally == pred_chain->chain->call_tally) && regclass_compatible_p (succ_chain->chain->class, pred_chain->chain->class) /* add_limits is not valid for MODE_PARTIAL_INT . */ && GET_MODE_CLASS (GET_MODE (rel_base->reg)) == MODE_INT && (succ_chain->chain->offset - pred_chain->match_offset >= add_limits[(int) GET_MODE (rel_base->reg)][0]) && (succ_chain->chain->offset - pred_chain->match_offset <= add_limits[(int) GET_MODE (rel_base->reg)][1])) { /* We can link these chains together. */ pred_chain->linked = succ_chain; succ_chain->start_luid = 0; num_linked++; pred_chain = *++pred_chainp; } } if (regmove_dump_file && num_linked) fprintf (regmove_dump_file, "Linked to %d sets of chains.\n", num_chains - num_linked); /* Now count the number of registers that are available for reuse. */ /* ??? In rare cases, we might reuse more if we took different end luids of the chains into account. Or we could just allocate some new regs. But that would probably not be worth the effort. */ /* ??? We should pay attention to preferred register classes here to, if the to-be-allocated register have a life outside the range that we handle. */ for (num_av_regs = 0, rel = rel_base; rel; rel = rel->prev) { if (! rel->invalidate_luid || rel->invalidate_luid > max_end_luid) num_av_regs++; } /* Propagate mandatory register assignments to the first chain in all sets of liked chains, and set rel_base_reg_user. */ for (rel_base_reg_user = 0, i = 0; i < num_chains; i++) { struct rel_use_chain *chain = chain_starttab[i]; if (chain->linked) chain->reg = chain->linked->reg; if (chain->reg == rel_base->reg) rel_base_reg_user = chain; } /* If rel_base->reg is not a mandatory allocated register, allocate it to that chain that starts first and has no allocated register, and that allows the addition of the start value in a single instruction. */ mode = (int) GET_MODE (rel_base->reg); if (! rel_base_reg_user) { for ( i = num_chains - 1; i >= 0; --i) { struct rel_use_chain *chain = chain_starttab[i]; if (! chain->reg && chain->start_luid && chain->chain->offset >= add_limits[mode][0] && chain->chain->offset <= add_limits[mode][1]) { chain->reg = rel_base->reg; rel_base_reg_user = chain; break; } } } else rel_base_reg_user_offset = rel_base_reg_user->chain->offset; /* Now check if it is worth doing this optimization after all. Using separate registers per value, like in the code generated by cse, costs two instructions per register (one move and one add). Using the chains we have set up, we need two instructions for every linked set of chains, plus one instruction for every link. We do the optimization if we save instructions, or if we stay with the same number of instructions, but save registers. We also require that we have enough registers available for reuse. Moreover, we have to check that we can add the offset for rel_base_reg_user, in case it is a mandatory allocated register. */ if (2 * num_regs > 2 * num_chains - num_linked - (num_linked != 0) && num_av_regs - (! rel_base_reg_user) >= num_chains - num_linked && rel_base_reg_user_offset >= add_limits[mode][0] && rel_base_reg_user_offset <= add_limits[mode][1]) { /* Hold the current offset between the initial value of rel_base->reg and the current value of rel_base->rel before the instruction that starts the current set of chains. */ int base_offset = 0; /* The next use of rel_base->reg that we have to look out for. */ struct rel_use *base_use; /* Pointer to next insn where we look for it. */ rtx base_use_scan = 0; int base_last_use_call_tally = rel_base->reg_set_call_tally; int base_regno; int base_seen; if (regmove_dump_file) fprintf (regmove_dump_file, "Optimization is worth while.\n"); /* First, remove all the setting insns, death notes and refcount increments that are now obsolete. */ for (rel = rel_base; rel; rel = rel->prev) { struct update *update; int regno = REGNO (rel->reg); if (rel != rel_base) { /* The first setting insn might be the start of a basic block. */ if (rel->insn == rel_base->insn /* We have to preserve insert_after. */ || rel->insn == insert_after) { PUT_CODE (rel->insn, NOTE); NOTE_LINE_NUMBER (rel->insn) = NOTE_INSN_DELETED; NOTE_SOURCE_FILE (rel->insn) = 0; } else delete_insn (rel->insn); REG_N_SETS (regno)--; } REG_N_CALLS_CROSSED (regno) -= rel->reg_orig_calls_crossed; for (update = rel->updates; update; update = update->prev) { rtx death_insn = update->death_insn; if (death_insn) { rtx death_note = find_reg_note (death_insn, REG_DEAD, rel->reg); if (! death_note) death_note = find_reg_note (death_insn, REG_UNUSED, rel->reg); remove_note (death_insn, death_note); REG_N_DEATHS (regno)--; } /* We have to preserve insert_after. */ if (rel->insn == insert_after) { PUT_CODE (update->insn, NOTE); NOTE_LINE_NUMBER (update->insn) = NOTE_INSN_DELETED; NOTE_SOURCE_FILE (update->insn) = 0; } else delete_insn (update->insn); REG_N_SETS (regno)--; } if (rel->death) { rtx death_note = find_reg_note (rel->death, REG_DEAD, rel->reg); if (! death_note) death_note = find_reg_note (rel->death, REG_UNUSED, rel->reg); remove_note (rel->death, death_note); rel->death = death_note; REG_N_DEATHS (regno)--; } } /* Go through all the chains and install the planned changes. */ rel = rel_base; if (rel_base_reg_user) { base_use = rel_base_reg_user->chain; base_use_scan = chain_starttab[num_chains - 1]->chain->insn; } for (i = 0; ! chain_starttab[i]->start_luid; i++); last_init_chain = chain_starttab[i]; base_regno = REGNO (rel_base->reg); base_seen = 0; for (i = num_chains - 1; i >= 0; i--) { int first_call_tally; rtx reg; int regno; struct rel_use *use, *last_use; chain0 = chain_starttab[i]; if (! chain0->start_luid) continue; first_call_tally = chain0->chain->call_tally; reg = chain0->reg; /* If this chain has not got a register yet, assign one. */ if (! reg) { do rel = rel->prev; while (! rel->death || (rel->invalidate_luid && rel->invalidate_luid <= max_end_luid)); reg = rel->reg; } regno = REGNO (reg); use = chain0->chain; /* Update base_offset. */ if (rel_base_reg_user) { rtx use_insn = use->insn; rtx base_use_insn = base_use->insn; if (! use_insn) use_insn = insert_after; while (base_use_scan != use_insn) { if (base_use_scan == base_use_insn) { base_offset = base_use->match_offset; base_use = base_use->next_chain; if (! base_use) { rel_base_reg_user = rel_base_reg_user->linked; if (! rel_base_reg_user) break; base_use = rel_base_reg_user->chain; } base_use_insn = base_use->insn; } base_use_scan = NEXT_INSN (base_use_scan); } /* If we are processing the start of a chain that starts with an instruction that also uses the base register, (that happens only if USE_INSN contains multiple distinct, but related values) and the chains using the base register have already been processed, the initializing instruction of the new register will end up after the adjustment of the base register. */ if (use_insn == base_use_insn && base_seen) base_offset = base_use->offset; } if (regno == base_regno) base_seen = 1; if (regno != base_regno || use->offset - base_offset) { rtx add; add = gen_add3_insn (reg, rel_base->reg, GEN_INT (use->offset - base_offset)); if (! add) abort (); if (GET_CODE (add) == SEQUENCE) { int i; for (i = XVECLEN (add, 0) - 1; i >= 0; i--) note_stores (PATTERN (XVECEXP (add, 0, i)), count_sets); } else note_stores (add, count_sets); if (use->insn) add = emit_insn_before (add, use->insn); else add = emit_insn_after (add, insert_after); if (use->call_tally > base_last_use_call_tally) base_last_use_call_tally = use->call_tally; /* If this is the last reg initializing insn, and we still have to place a death note for the base reg, attach it to this insn - unless we are still using the base register. */ if (chain0 == last_init_chain && rel_base->death && regno != base_regno) { XEXP (rel_base->death, 0) = rel_base->reg; XEXP (rel_base->death, 1) = REG_NOTES (add); REG_NOTES (add) = rel_base->death; REG_N_DEATHS (base_regno)++; } } for (last_use = 0, chain = chain0; chain; chain = chain->linked) { int last_offset; use = chain->chain; if (last_use) { rtx add = gen_add3_insn (reg, reg, GEN_INT (use->offset - last_use->offset)); if (! add) abort (); if (use->insn) emit_insn_before (add, use->insn); else { /* Set use->insn, so that base_offset will be adjusted in time if REG is REL_BASE->REG . */ use->insn = emit_insn_after (add, last_use->insn); } REG_N_SETS (regno)++; } for (last_offset = use->offset; use; use = use->next_chain) { rtx addr; int use_offset; addr = *use->addrp; if (GET_CODE (addr) != REG) remove_note (use->insn, find_reg_note (use->insn, REG_INC, XEXP (addr, 0))); use_offset = use->offset; if (use_offset == last_offset) { if (use->set_in_parallel) { REG_N_SETS (REGNO (addr))--; addr = reg; } else if (use->match_offset > use_offset) addr = gen_rtx_POST_INC (Pmode, reg); else if (use->match_offset < use_offset) addr = gen_rtx_POST_DEC (Pmode, reg); else addr = reg; } else if (use_offset > last_offset) addr = gen_rtx_PRE_INC (Pmode, reg); else addr = gen_rtx_PRE_DEC (Pmode, reg); /* Group changes from the same chain for the same insn together, to avoid failures for match_dups. */ validate_change (use->insn, use->addrp, addr, 1); if ((! use->next_chain || use->next_chain->insn != use->insn) && ! apply_change_group ()) abort (); if (addr != reg) REG_NOTES (use->insn) = gen_rtx_EXPR_LIST (REG_INC, reg, REG_NOTES (use->insn)); last_use = use; last_offset = use->match_offset; } } /* If REG dies, attach its death note to the last using insn in the set of linked chains we just handled. However, if REG is the base register, don't do this if there will be a later initializing instruction for another register. The initializing instruction for last_init_chain will be inserted before last_init_chain->chain->insn, so if the luids (and hence the insns these stand for) are equal, put the death note here. */ if (reg == rel->reg && rel->death && (rel != rel_base || last_use->luid >= last_init_chain->start_luid)) { XEXP (rel->death, 0) = reg; PUT_MODE (rel->death, (reg_set_p (reg, PATTERN (last_use->insn)) ? REG_UNUSED : REG_DEAD)); XEXP (rel->death, 1) = REG_NOTES (last_use->insn); REG_NOTES (last_use->insn) = rel->death; /* Mark this death as 'used up'. That is important for the base register. */ rel->death = NULL_RTX; REG_N_DEATHS (regno)++; } if (regno == base_regno) base_last_use_call_tally = last_use->call_tally; else REG_N_CALLS_CROSSED (regno) += last_use->call_tally - first_call_tally; } REG_N_CALLS_CROSSED (base_regno) += base_last_use_call_tally - rel_base->reg_set_call_tally; } /* Finally, clear the entries that we used in regno_related. We do it item by item here, because doing it with bzero for each basic block would give O(n*n) time complexity. */ for (rel = rel_base; rel; rel = rel->prev) regno_related[REGNO (rel->reg)] = 0; return baseinfo->prev_base; } /* Finalize the optimization for any related values know so far, and reset the entries in regno_related that we have disturbed. */ static void optimize_related_values_0 (rel_base_list, luid, call_tally, insert_after, regmove_dump_file) struct related *rel_base_list; int luid, call_tally; rtx insert_after; FILE *regmove_dump_file; { while (rel_base_list) rel_base_list = optimize_related_values_1 (rel_base_list, luid, call_tally, insert_after, regmove_dump_file); for ( ; unrelatedly_used; unrelatedly_used = unrelatedly_used->prev) regno_related[REGNO (unrelatedly_used->reg)] = 0; } /* Scan the entire function for instances where multiple registers are set to values that differ only by a constant. Then try to reduce the number of instructions and/or registers needed by exploiting auto_increment and true two-address additions. */ static void optimize_related_values (nregs, regmove_dump_file) int nregs; FILE *regmove_dump_file; { int b; rtx insn; int luid = 0; int call_tally = 0; int save_loop_depth = loop_depth; enum machine_mode mode; if (regmove_dump_file) fprintf (regmove_dump_file, "Starting optimize_related_values.\n"); /* For each integer mode, find minimum and maximum value for a single- instruction reg-constant add. */ for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode; mode = GET_MODE_WIDER_MODE (mode)) { rtx reg = gen_rtx_REG (mode, FIRST_PSEUDO_REGISTER); int icode = (int) add_optab->handlers[(int) mode].insn_code; HOST_WIDE_INT tmp; rtx add, set; int p, p_max; add_limits[(int) mode][0] = 0; add_limits[(int) mode][1] = 0; if (icode == CODE_FOR_nothing || ! (*insn_operand_predicate[icode][0]) (reg, mode) || ! (*insn_operand_predicate[icode][1]) (reg, mode) || ! (*insn_operand_predicate[icode][2]) (const1_rtx, mode)) continue; add = GEN_FCN (icode) (reg, reg, const1_rtx); if (GET_CODE (add) == SEQUENCE) continue; add = make_insn_raw (add); set = single_set (add); if (! set || GET_CODE (SET_SRC (set)) != PLUS || XEXP (SET_SRC (set), 1) != const1_rtx) continue; p_max = GET_MODE_BITSIZE (mode) - 1; if (p_max > HOST_BITS_PER_WIDE_INT - 2) p_max = HOST_BITS_PER_WIDE_INT - 2; for (p = 2; p < p_max; p++) { if (! validate_change (add, &XEXP (SET_SRC (set), 1), GEN_INT (((HOST_WIDE_INT) 1 << p) - 1), 0)) break; } add_limits[(int) mode][1] = tmp = INTVAL (XEXP (SET_SRC (set), 1)); /* We need a range of known good values for the constant of the add. Thus, before checking for the power of two, check for one less first, in case the power of two is an exceptional value. */ if (validate_change (add, &XEXP (SET_SRC (set), 1), GEN_INT (-tmp), 0)) { if (validate_change (add, &XEXP (SET_SRC (set), 1), GEN_INT (-tmp - 1), 0)) add_limits[(int) mode][0] = -tmp - 1; else add_limits[(int) mode][0] = -tmp; } } /* Insert notes before basic block ends, so that we can safely insert other insns. Don't do this when it would separate a BARRIER from the insn that it belongs to; we really need the notes only when the basic block end is due to a following label or to the end of the function. We must never dispose a JUMP_INSN as last insn of a basic block, since this confuses save_call_clobbered_regs. */ for (b = 0; b < n_basic_blocks; b++) { rtx end = BLOCK_END (b); if (GET_CODE (end) != JUMP_INSN) { rtx next = next_nonnote_insn (BLOCK_END (b)); if (! next || GET_CODE (next) != BARRIER) BLOCK_END (b) = emit_note_after (NOTE_INSN_DELETED, BLOCK_END (b)); } } gcc_obstack_init (&related_obstack); regno_related = rel_alloc (nregs * sizeof *regno_related); bzero ((char *) regno_related, nregs * sizeof *regno_related); rel_base_list = 0; loop_depth = 1; for (insn = get_insns (); insn; insn = NEXT_INSN (insn)) { rtx cc0_user = NULL_RTX; luid++; if (GET_CODE (insn) == NOTE) { if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG) loop_depth++; else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END) loop_depth--; } if (GET_RTX_CLASS (GET_CODE (insn)) == 'i') { rtx note; if (GET_CODE (insn) == CALL_INSN) call_tally++; find_related (&PATTERN (insn), insn, luid, call_tally); for (note = REG_NOTES (insn); note; note = XEXP (note, 1)) { if (REG_NOTE_KIND (note) == REG_DEAD || (REG_NOTE_KIND (note) == REG_UNUSED && GET_CODE (XEXP (note, 0)) == REG)) { rtx reg = XEXP (note, 0); int regno = REGNO (reg); if (REG_NOTE_KIND (note) == REG_DEAD && reg_set_p (reg, PATTERN (insn))) { remove_note (insn, note); REG_N_DEATHS (regno)--; } else if (regno_related[regno] && ! regno_related[regno]->invalidate_luid) { regno_related[regno]->death = insn; regno_related[regno]->reg_orig_calls_crossed = call_tally - regno_related[regno]->reg_set_call_tally; } } } #ifdef HAVE_cc0 if (sets_cc0_p (PATTERN (insn))) cc0_user = next_cc0_user (insn); #endif } /* We always end the current processing when we have a cc0-setter-user pair, not only when the user ends a basic block. Otherwise, we might end up with one or more extra instructions inserted in front of the user, to set up or adjust a register. There are cases where this could be handled smarter, but most of the time the user will be a branch anyways, so the extra effort to handle the occaisonal conditional instruction is probably not justified by the little possible extra gain. */ if (GET_CODE (insn) == CODE_LABEL || GET_CODE (insn) == JUMP_INSN || (flag_exceptions && GET_CODE (insn) == CALL_INSN) || cc0_user) { optimize_related_values_0 (rel_base_list, luid, call_tally, prev_nonnote_insn (insn), regmove_dump_file); rel_base_list = 0; if (cc0_user) insn = cc0_user; } } optimize_related_values_0 (rel_base_list, luid, call_tally, get_last_insn (), regmove_dump_file); obstack_free (&related_obstack, 0); loop_depth = save_loop_depth; if (regmove_dump_file) fprintf (regmove_dump_file, "Finished optimize_related_values.\n"); } #endif /* REGISTER_CONSTRAINTS */ /* END CYGNUS LOCAL */ #endif /* AUTO_INC_DEC */ static int *regno_src_regno; /* Indicate how good a choice REG (which appears as a source) is to replace a destination register with. The higher the returned value, the better the choice. The main objective is to avoid using a register that is a candidate for tying to a hard register, since the output might in turn be a candidate to be tied to a different hard register. */ int replacement_quality(reg) rtx reg; { int src_regno; /* Bad if this isn't a register at all. */ if (GET_CODE (reg) != REG) return 0; /* If this register is not meant to get a hard register, it is a poor choice. */ if (REG_LIVE_LENGTH (REGNO (reg)) < 0) return 0; src_regno = regno_src_regno[REGNO (reg)]; /* If it was not copied from another register, it is fine. */ if (src_regno < 0) return 3; /* Copied from a hard register? */ if (src_regno < FIRST_PSEUDO_REGISTER) return 1; /* Copied from a pseudo register - not as bad as from a hard register, yet still cumbersome, since the register live length will be lengthened when the registers get tied. */ return 2; } /* INSN is a copy from SRC to DEST, both registers, and SRC does not die in INSN. Search forward to see if SRC dies before either it or DEST is modified, but don't scan past the end of a basic block. If so, we can replace SRC with DEST and let SRC die in INSN. This will reduce the number of registers live in that range and may enable DEST to be tied to SRC, thus often saving one register in addition to a register-register copy. */ static int optimize_reg_copy_1 (insn, dest, src) rtx insn; rtx dest; rtx src; { rtx p, q; rtx note; rtx dest_death = 0; int sregno = REGNO (src); int dregno = REGNO (dest); /* We don't want to mess with hard regs if register classes are small. */ if (sregno == dregno || (SMALL_REGISTER_CLASSES && (sregno < FIRST_PSEUDO_REGISTER || dregno < FIRST_PSEUDO_REGISTER)) /* We don't see all updates to SP if they are in an auto-inc memory reference, so we must disallow this optimization on them. */ || sregno == STACK_POINTER_REGNUM || dregno == STACK_POINTER_REGNUM) return 0; for (p = NEXT_INSN (insn); p; p = NEXT_INSN (p)) { if (GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN || (GET_CODE (p) == NOTE && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END))) break; /* ??? We can't scan past the end of a basic block without updating the register lifetime info (REG_DEAD/basic_block_live_at_start). A CALL_INSN might be the last insn of a basic block, if it is inside an EH region. There is no easy way to tell, so we just always break when we see a CALL_INSN if flag_exceptions is nonzero. */ if (flag_exceptions && GET_CODE (p) == CALL_INSN) break; if (GET_RTX_CLASS (GET_CODE (p)) != 'i') continue; if (reg_set_p (src, p) || reg_set_p (dest, p) /* Don't change a USE of a register. */ || (GET_CODE (PATTERN (p)) == USE && reg_overlap_mentioned_p (src, XEXP (PATTERN (p), 0)))) break; /* See if all of SRC dies in P. This test is slightly more conservative than it needs to be. */ if ((note = find_regno_note (p, REG_DEAD, sregno)) != 0 && GET_MODE (XEXP (note, 0)) == GET_MODE (src)) { int failed = 0; int d_length = 0; int s_length = 0; int d_n_calls = 0; int s_n_calls = 0; /* We can do the optimization. Scan forward from INSN again, replacing regs as we go. Set FAILED if a replacement can't be done. In that case, we can't move the death note for SRC. This should be rare. */ /* Set to stop at next insn. */ for (q = next_real_insn (insn); q != next_real_insn (p); q = next_real_insn (q)) { if (reg_overlap_mentioned_p (src, PATTERN (q))) { /* If SRC is a hard register, we might miss some overlapping registers with validate_replace_rtx, so we would have to undo it. We can't if DEST is present in the insn, so fail in that combination of cases. */ if (sregno < FIRST_PSEUDO_REGISTER && reg_mentioned_p (dest, PATTERN (q))) failed = 1; /* Replace all uses and make sure that the register isn't still present. */ else if (validate_replace_rtx (src, dest, q) && (sregno >= FIRST_PSEUDO_REGISTER || ! reg_overlap_mentioned_p (src, PATTERN (q)))) { /* We assume that a register is used exactly once per insn in the REG_N_REFS updates below. If this is not correct, no great harm is done. Since we do not know if we will change the lifetime of SREGNO or DREGNO, we must not update REG_LIVE_LENGTH or REG_N_CALLS_CROSSED at this time. */ if (sregno >= FIRST_PSEUDO_REGISTER) REG_N_REFS (sregno) -= loop_depth; if (dregno >= FIRST_PSEUDO_REGISTER) REG_N_REFS (dregno) += loop_depth; } else { validate_replace_rtx (dest, src, q); failed = 1; } } /* For SREGNO, count the total number of insns scanned. For DREGNO, count the total number of insns scanned after passing the death note for DREGNO. */ s_length++; if (dest_death) d_length++; /* If the insn in which SRC dies is a CALL_INSN, don't count it as a call that has been crossed. Otherwise, count it. */ if (q != p && GET_CODE (q) == CALL_INSN) { /* Similarly, total calls for SREGNO, total calls beyond the death note for DREGNO. */ s_n_calls++; if (dest_death) d_n_calls++; } /* If DEST dies here, remove the death note and save it for later. Make sure ALL of DEST dies here; again, this is overly conservative. */ if (dest_death == 0 && (dest_death = find_regno_note (q, REG_DEAD, dregno)) != 0) { if (GET_MODE (XEXP (dest_death, 0)) != GET_MODE (dest)) failed = 1, dest_death = 0; else remove_note (q, dest_death); } } if (! failed) { /* These counters need to be updated if and only if we are going to move the REG_DEAD note. */ if (sregno >= FIRST_PSEUDO_REGISTER) { if (REG_LIVE_LENGTH (sregno) >= 0) { REG_LIVE_LENGTH (sregno) -= s_length; /* REG_LIVE_LENGTH is only an approximation after combine if sched is not run, so make sure that we still have a reasonable value. */ if (REG_LIVE_LENGTH (sregno) < 2) REG_LIVE_LENGTH (sregno) = 2; } REG_N_CALLS_CROSSED (sregno) -= s_n_calls; } /* Move death note of SRC from P to INSN. */ remove_note (p, note); XEXP (note, 1) = REG_NOTES (insn); REG_NOTES (insn) = note; } /* Put death note of DEST on P if we saw it die. */ if (dest_death) { XEXP (dest_death, 1) = REG_NOTES (p); REG_NOTES (p) = dest_death; if (dregno >= FIRST_PSEUDO_REGISTER) { /* If and only if we are moving the death note for DREGNO, then we need to update its counters. */ if (REG_LIVE_LENGTH (dregno) >= 0) REG_LIVE_LENGTH (dregno) += d_length; REG_N_CALLS_CROSSED (dregno) += d_n_calls; } } return ! failed; } /* If SRC is a hard register which is set or killed in some other way, we can't do this optimization. */ else if (sregno < FIRST_PSEUDO_REGISTER && dead_or_set_p (p, src)) break; } return 0; } /* INSN is a copy of SRC to DEST, in which SRC dies. See if we now have a sequence of insns that modify DEST followed by an insn that sets SRC to DEST in which DEST dies, with no prior modification of DEST. (There is no need to check if the insns in between actually modify DEST. We should not have cases where DEST is not modified, but the optimization is safe if no such modification is detected.) In that case, we can replace all uses of DEST, starting with INSN and ending with the set of SRC to DEST, with SRC. We do not do this optimization if a CALL_INSN is crossed unless SRC already crosses a call or if DEST dies before the copy back to SRC. It is assumed that DEST and SRC are pseudos; it is too complicated to do this for hard registers since the substitutions we may make might fail. */ static void optimize_reg_copy_2 (insn, dest, src) rtx insn; rtx dest; rtx src; { rtx p, q; rtx set; int sregno = REGNO (src); int dregno = REGNO (dest); for (p = NEXT_INSN (insn); p; p = NEXT_INSN (p)) { if (GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN || (GET_CODE (p) == NOTE && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END))) break; /* ??? We can't scan past the end of a basic block without updating the register lifetime info (REG_DEAD/basic_block_live_at_start). A CALL_INSN might be the last insn of a basic block, if it is inside an EH region. There is no easy way to tell, so we just always break when we see a CALL_INSN if flag_exceptions is nonzero. */ if (flag_exceptions && GET_CODE (p) == CALL_INSN) break; if (GET_RTX_CLASS (GET_CODE (p)) != 'i') continue; set = single_set (p); if (set && SET_SRC (set) == dest && SET_DEST (set) == src && find_reg_note (p, REG_DEAD, dest)) { /* We can do the optimization. Scan forward from INSN again, replacing regs as we go. */ /* Set to stop at next insn. */ for (q = insn; q != NEXT_INSN (p); q = NEXT_INSN (q)) if (GET_RTX_CLASS (GET_CODE (q)) == 'i') { if (reg_mentioned_p (dest, PATTERN (q))) { PATTERN (q) = replace_rtx (PATTERN (q), dest, src); /* We assume that a register is used exactly once per insn in the updates below. If this is not correct, no great harm is done. */ REG_N_REFS (dregno) -= loop_depth; REG_N_REFS (sregno) += loop_depth; } if (GET_CODE (q) == CALL_INSN) { REG_N_CALLS_CROSSED (dregno)--; REG_N_CALLS_CROSSED (sregno)++; } } remove_note (p, find_reg_note (p, REG_DEAD, dest)); REG_N_DEATHS (dregno)--; remove_note (insn, find_reg_note (insn, REG_DEAD, src)); REG_N_DEATHS (sregno)--; return; } if (reg_set_p (src, p) || find_reg_note (p, REG_DEAD, dest) || (GET_CODE (p) == CALL_INSN && REG_N_CALLS_CROSSED (sregno) == 0)) break; } } /* INSN is a ZERO_EXTEND or SIGN_EXTEND of SRC to DEST. Look if SRC dies there, and if it is only set once, by loading it from memory. If so, try to encorporate the zero/sign extension into the memory read, change SRC to the mode of DEST, and alter the remaining accesses to use the appropriate SUBREG. This allows SRC and DEST to be tied later. */ static void optimize_reg_copy_3 (insn, dest, src) rtx insn; rtx dest; rtx src; { rtx src_reg = XEXP (src, 0); int src_no = REGNO (src_reg); int dst_no = REGNO (dest); rtx p, set, subreg; enum machine_mode old_mode; if (src_no < FIRST_PSEUDO_REGISTER || dst_no < FIRST_PSEUDO_REGISTER || ! find_reg_note (insn, REG_DEAD, src_reg) || REG_N_SETS (src_no) != 1) return; for (p = PREV_INSN (insn); ! reg_set_p (src_reg, p); p = PREV_INSN (p)) { if (GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN || (GET_CODE (p) == NOTE && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END))) return; /* ??? We can't scan past the end of a basic block without updating the register lifetime info (REG_DEAD/basic_block_live_at_start). A CALL_INSN might be the last insn of a basic block, if it is inside an EH region. There is no easy way to tell, so we just always break when we see a CALL_INSN if flag_exceptions is nonzero. */ if (flag_exceptions && GET_CODE (p) == CALL_INSN) return; if (GET_RTX_CLASS (GET_CODE (p)) != 'i') continue; } if (! (set = single_set (p)) || GET_CODE (SET_SRC (set)) != MEM || SET_DEST (set) != src_reg) return; /* Be conserative: although this optimization is also valid for volatile memory references, that could cause trouble in later passes. */ if (MEM_VOLATILE_P (SET_SRC (set))) return; /* Do not use a SUBREG to truncate from one mode to another if truncation is not a nop. */ if (GET_MODE_BITSIZE (GET_MODE (src_reg)) <= GET_MODE_BITSIZE (GET_MODE (src)) && !TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (GET_MODE (src)), GET_MODE_BITSIZE (GET_MODE (src_reg)))) return; old_mode = GET_MODE (src_reg); PUT_MODE (src_reg, GET_MODE (src)); XEXP (src, 0) = SET_SRC (set); /* Include this change in the group so that it's easily undone if one of the changes in the group is invalid. */ validate_change (p, &SET_SRC (set), src, 1); /* Now walk forward making additional replacements. We want to be able to undo all the changes if a later substitution fails. */ subreg = gen_rtx_SUBREG (old_mode, src_reg, 0); while (p = NEXT_INSN (p), p != insn) { if (GET_RTX_CLASS (GET_CODE (p)) != 'i') continue; /* Make a tenative change. */ validate_replace_rtx_group (src_reg, subreg, p); } validate_replace_rtx_group (src, src_reg, insn); /* Now see if all the changes are valid. */ if (! apply_change_group ()) { /* One or more changes were no good. Back out everything. */ PUT_MODE (src_reg, old_mode); XEXP (src, 0) = src_reg; } } /* If we were not able to update the users of src to use dest directly, try instead moving the value to dest directly before the operation. */ static void copy_src_to_dest (insn, src, dest, loop_depth, old_max_uid) rtx insn; rtx src; rtx dest; int loop_depth; int old_max_uid; { rtx seq; rtx link; rtx next; rtx set; rtx move_insn; rtx *p_insn_notes; rtx *p_move_notes; int src_regno; int dest_regno; int bb; int insn_uid; int move_uid; /* A REG_LIVE_LENGTH of -1 indicates the register is equivalent to a constant or memory location and is used infrequently; a REG_LIVE_LENGTH of -2 is parameter when there is no frame pointer that is not allocated a register. For now, we just reject them, rather than incrementing the live length. */ if (GET_CODE (src) == REG && REG_LIVE_LENGTH (REGNO (src)) > 0 && GET_CODE (dest) == REG && REG_LIVE_LENGTH (REGNO (dest)) > 0 && (set = single_set (insn)) != NULL_RTX && !reg_mentioned_p (dest, SET_SRC (set)) && GET_MODE (src) == GET_MODE (dest)) { int old_num_regs = reg_rtx_no; /* Generate the src->dest move. */ start_sequence (); emit_move_insn (dest, src); seq = gen_sequence (); end_sequence (); /* If this sequence uses new registers, we may not use it. */ if (old_num_regs != reg_rtx_no || ! validate_replace_rtx (src, dest, insn)) { /* We have to restore reg_rtx_no to its old value, lest recompute_reg_usage will try to compute the usage of the new regs, yet reg_n_info is not valid for them. */ reg_rtx_no = old_num_regs; return; } emit_insn_before (seq, insn); move_insn = PREV_INSN (insn); p_move_notes = ®_NOTES (move_insn); p_insn_notes = ®_NOTES (insn); /* Move any notes mentioning src to the move instruction */ for (link = REG_NOTES (insn); link != NULL_RTX; link = next) { next = XEXP (link, 1); if (XEXP (link, 0) == src) { *p_move_notes = link; p_move_notes = &XEXP (link, 1); } else { *p_insn_notes = link; p_insn_notes = &XEXP (link, 1); } } *p_move_notes = NULL_RTX; *p_insn_notes = NULL_RTX; /* Is the insn the head of a basic block? If so extend it */ insn_uid = INSN_UID (insn); move_uid = INSN_UID (move_insn); if (insn_uid < old_max_uid) { bb = regmove_bb_head[insn_uid]; if (bb >= 0) { BLOCK_HEAD (bb) = move_insn; regmove_bb_head[insn_uid] = -1; } } /* Update the various register tables. */ dest_regno = REGNO (dest); REG_N_SETS (dest_regno) += loop_depth; REG_N_REFS (dest_regno) += loop_depth; REG_LIVE_LENGTH (dest_regno)++; if (REGNO_FIRST_UID (dest_regno) == insn_uid) REGNO_FIRST_UID (dest_regno) = move_uid; src_regno = REGNO (src); if (! find_reg_note (move_insn, REG_DEAD, src)) REG_LIVE_LENGTH (src_regno)++; if (REGNO_FIRST_UID (src_regno) == insn_uid) REGNO_FIRST_UID (src_regno) = move_uid; if (REGNO_LAST_UID (src_regno) == insn_uid) REGNO_LAST_UID (src_regno) = move_uid; if (REGNO_LAST_NOTE_UID (src_regno) == insn_uid) REGNO_LAST_NOTE_UID (src_regno) = move_uid; } } /* Return whether REG is set in only one location, and is set to a constant, but is set in a different basic block from INSN (an instructions which uses REG). In this case REG is equivalent to a constant, and we don't want to break that equivalence, because that may increase register pressure and make reload harder. If REG is set in the same basic block as INSN, we don't worry about it, because we'll probably need a register anyhow (??? but what if REG is used in a different basic block as well as this one?). FIRST is the first insn in the function. */ static int reg_is_remote_constant_p (reg, insn, first) rtx reg; rtx insn; rtx first; { register rtx p; if (REG_N_SETS (REGNO (reg)) != 1) return 0; /* Look for the set. */ for (p = LOG_LINKS (insn); p; p = XEXP (p, 1)) { rtx s; if (REG_NOTE_KIND (p) != 0) continue; s = single_set (XEXP (p, 0)); if (s != 0 && GET_CODE (SET_DEST (s)) == REG && REGNO (SET_DEST (s)) == REGNO (reg)) { /* The register is set in the same basic block. */ return 0; } } for (p = first; p && p != insn; p = NEXT_INSN (p)) { rtx s; if (GET_RTX_CLASS (GET_CODE (p)) != 'i') continue; s = single_set (p); if (s != 0 && GET_CODE (SET_DEST (s)) == REG && REGNO (SET_DEST (s)) == REGNO (reg)) { /* This is the instruction which sets REG. If there is a REG_EQUAL note, then REG is equivalent to a constant. */ if (find_reg_note (p, REG_EQUAL, NULL_RTX)) return 1; return 0; } } return 0; } /* INSN is adding a CONST_INT to a REG. We search backwards looking for another add immediate instruction with the same source and dest registers, and if we find one, we change INSN to an increment, and return 1. If no changes are made, we return 0. This changes (set (reg100) (plus reg1 offset1)) ... (set (reg100) (plus reg1 offset2)) to (set (reg100) (plus reg1 offset1)) ... (set (reg100) (plus reg100 offset2-offset1)) */ /* ??? What does this comment mean? */ /* cse disrupts preincrement / postdecrement squences when it finds a hard register as ultimate source, like the frame pointer. */ int fixup_match_2 (insn, dst, src, offset, regmove_dump_file) rtx insn, dst, src, offset; FILE *regmove_dump_file; { rtx p, dst_death = 0; int length, num_calls = 0; /* If SRC dies in INSN, we'd have to move the death note. This is considered to be very unlikely, so we just skip the optimization in this case. */ if (find_regno_note (insn, REG_DEAD, REGNO (src))) return 0; /* Scan backward to find the first instruction that sets DST. */ for (length = 0, p = PREV_INSN (insn); p; p = PREV_INSN (p)) { rtx pset; if (GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN || (GET_CODE (p) == NOTE && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END))) break; /* ??? We can't scan past the end of a basic block without updating the register lifetime info (REG_DEAD/basic_block_live_at_start). A CALL_INSN might be the last insn of a basic block, if it is inside an EH region. There is no easy way to tell, so we just always break when we see a CALL_INSN if flag_exceptions is nonzero. */ if (flag_exceptions && GET_CODE (p) == CALL_INSN) break; if (GET_RTX_CLASS (GET_CODE (p)) != 'i') continue; if (find_regno_note (p, REG_DEAD, REGNO (dst))) dst_death = p; if (! dst_death) length++; pset = single_set (p); if (pset && SET_DEST (pset) == dst && GET_CODE (SET_SRC (pset)) == PLUS && XEXP (SET_SRC (pset), 0) == src && GET_CODE (XEXP (SET_SRC (pset), 1)) == CONST_INT) { HOST_WIDE_INT newconst = INTVAL (offset) - INTVAL (XEXP (SET_SRC (pset), 1)); rtx add = gen_add3_insn (dst, dst, GEN_INT (newconst)); if (add && validate_change (insn, &PATTERN (insn), add, 0)) { /* Remove the death note for DST from DST_DEATH. */ if (dst_death) { remove_death (REGNO (dst), dst_death); REG_LIVE_LENGTH (REGNO (dst)) += length; REG_N_CALLS_CROSSED (REGNO (dst)) += num_calls; } REG_N_REFS (REGNO (dst)) += loop_depth; REG_N_REFS (REGNO (src)) -= loop_depth; if (regmove_dump_file) fprintf (regmove_dump_file, "Fixed operand of insn %d.\n", INSN_UID (insn)); #ifdef AUTO_INC_DEC for (p = PREV_INSN (insn); p; p = PREV_INSN (p)) { if (GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN || (GET_CODE (p) == NOTE && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END))) break; if (GET_RTX_CLASS (GET_CODE (p)) != 'i') continue; if (reg_overlap_mentioned_p (dst, PATTERN (p))) { if (try_auto_increment (p, insn, 0, dst, newconst, 0)) return 1; break; } } for (p = NEXT_INSN (insn); p; p = NEXT_INSN (p)) { if (GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN || (GET_CODE (p) == NOTE && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END))) break; if (GET_RTX_CLASS (GET_CODE (p)) != 'i') continue; if (reg_overlap_mentioned_p (dst, PATTERN (p))) { try_auto_increment (p, insn, 0, dst, newconst, 1); break; } } #endif return 1; } } if (reg_set_p (dst, PATTERN (p))) break; /* If we have passed a call instruction, and the pseudo-reg SRC is not already live across a call, then don't perform the optimization. */ /* reg_set_p is overly conservative for CALL_INSNS, thinks that all hard regs are clobbered. Thus, we only use it for src for non-call insns. */ if (GET_CODE (p) == CALL_INSN) { if (! dst_death) num_calls++; if (REG_N_CALLS_CROSSED (REGNO (src)) == 0) break; if (call_used_regs [REGNO (dst)] || find_reg_fusage (p, CLOBBER, dst)) break; } else if (reg_set_p (src, PATTERN (p))) break; } return 0; } void regmove_optimize (f, nregs, regmove_dump_file) rtx f; int nregs; FILE *regmove_dump_file; { int old_max_uid = get_max_uid (); rtx insn; struct match match; int pass; /* CYGNUS LOCAL SH4-OPT */ int related_values_optimized = 0; /* END CYGNUS LOCAL */ int i; rtx copy_src, copy_dst; regno_src_regno = (int *)alloca (sizeof *regno_src_regno * nregs); for (i = nregs; --i >= 0; ) regno_src_regno[i] = -1; regmove_bb_head = (int *)alloca (sizeof (int) * (old_max_uid + 1)); for (i = old_max_uid; i >= 0; i--) regmove_bb_head[i] = -1; for (i = 0; i < n_basic_blocks; i++) regmove_bb_head[INSN_UID (BLOCK_HEAD (i))] = i; /* A forward/backward pass. Replace output operands with input operands. */ loop_depth = 1; for (pass = 0; pass <= 2; pass++) { if (! flag_regmove && pass >= flag_expensive_optimizations) return; if (regmove_dump_file) fprintf (regmove_dump_file, "Starting %s pass...\n", pass ? "backward" : "forward"); for (insn = pass ? get_last_insn () : f; insn; insn = pass ? PREV_INSN (insn) : NEXT_INSN (insn)) { rtx set; int op_no, match_no; if (GET_CODE (insn) == NOTE) { if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG) loop_depth++; else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END) loop_depth--; } set = single_set (insn); if (! set) continue; if (flag_expensive_optimizations && ! pass && (GET_CODE (SET_SRC (set)) == SIGN_EXTEND || GET_CODE (SET_SRC (set)) == ZERO_EXTEND) && GET_CODE (XEXP (SET_SRC (set), 0)) == REG && GET_CODE (SET_DEST(set)) == REG) optimize_reg_copy_3 (insn, SET_DEST (set), SET_SRC (set)); if (flag_expensive_optimizations && ! pass && GET_CODE (SET_SRC (set)) == REG && GET_CODE (SET_DEST(set)) == REG) { /* If this is a register-register copy where SRC is not dead, see if we can optimize it. If this optimization succeeds, it will become a copy where SRC is dead. */ if ((find_reg_note (insn, REG_DEAD, SET_SRC (set)) || optimize_reg_copy_1 (insn, SET_DEST (set), SET_SRC (set))) && REGNO (SET_DEST (set)) >= FIRST_PSEUDO_REGISTER) { /* Similarly for a pseudo-pseudo copy when SRC is dead. */ if (REGNO (SET_SRC (set)) >= FIRST_PSEUDO_REGISTER) optimize_reg_copy_2 (insn, SET_DEST (set), SET_SRC (set)); if (regno_src_regno[REGNO (SET_DEST (set))] < 0 && SET_SRC (set) != SET_DEST (set)) { int srcregno = REGNO (SET_SRC(set)); if (regno_src_regno[srcregno] >= 0) srcregno = regno_src_regno[srcregno]; regno_src_regno[REGNO (SET_DEST (set))] = srcregno; } } } if (! flag_regmove) continue; #ifdef REGISTER_CONSTRAINTS if (! find_matches (insn, &match)) continue; /* Now scan through the operands looking for a source operand which is supposed to match the destination operand. Then scan forward for an instruction which uses the dest operand. If it dies there, then replace the dest in both operands with the source operand. */ for (op_no = 0; op_no < recog_n_operands; op_no++) { rtx src, dst, src_subreg; enum reg_class src_class, dst_class; match_no = match.with[op_no]; /* Nothing to do if the two operands aren't supposed to match. */ if (match_no < 0) continue; src = recog_operand[op_no]; dst = recog_operand[match_no]; if (GET_CODE (src) != REG) continue; src_subreg = src; if (GET_CODE (dst) == SUBREG && GET_MODE_SIZE (GET_MODE (dst)) >= GET_MODE_SIZE (GET_MODE (SUBREG_REG (dst)))) { src_subreg = gen_rtx_SUBREG (GET_MODE (SUBREG_REG (dst)), src, SUBREG_WORD (dst)); dst = SUBREG_REG (dst); } if (GET_CODE (dst) != REG || REGNO (dst) < FIRST_PSEUDO_REGISTER) continue; if (REGNO (src) < FIRST_PSEUDO_REGISTER) { if (match.commutative[op_no] < op_no) regno_src_regno[REGNO (dst)] = REGNO (src); continue; } if (REG_LIVE_LENGTH (REGNO (src)) < 0) continue; /* op_no/src must be a read-only operand, and match_operand/dst must be a write-only operand. */ if (match.use[op_no] != READ || match.use[match_no] != WRITE) continue; if (match.early_clobber[match_no] && count_occurrences (PATTERN (insn), src) > 1) continue; /* Make sure match_operand is the destination. */ if (recog_operand[match_no] != SET_DEST (set)) continue; /* If the operands already match, then there is nothing to do. */ /* But in the commutative case, we might find a better match. */ if (operands_match_p (src, dst) || (match.commutative[op_no] >= 0 && operands_match_p (recog_operand[match.commutative [op_no]], dst) && (replacement_quality (recog_operand[match.commutative [op_no]]) >= replacement_quality (src)))) continue; src_class = reg_preferred_class (REGNO (src)); dst_class = reg_preferred_class (REGNO (dst)); if (! regclass_compatible_p (src_class, dst_class)) continue; /* CYGNUS LOCAL SH4-OPT */ #ifdef AUTO_INC_DEC /* See the comment in front of REL_USE_HASH_SIZE what this is about. */ if (flag_expensive_optimizations && GET_MODE (dst) == Pmode && GET_CODE (SET_SRC (set)) == PLUS && XEXP (SET_SRC (set), 0) == src_subreg && GET_CODE (XEXP (SET_SRC (set), 1)) == CONST_INT && ! related_values_optimized) { optimize_related_values (nregs, regmove_dump_file); related_values_optimized = 1; } #endif /* END CYGNUS LOCAL */ if (fixup_match_1 (insn, set, src, src_subreg, dst, pass, op_no, match_no, regmove_dump_file)) break; } } } /* A backward pass. Replace input operands with output operands. */ if (regmove_dump_file) fprintf (regmove_dump_file, "Starting backward pass...\n"); loop_depth = 1; for (insn = get_last_insn (); insn; insn = PREV_INSN (insn)) { if (GET_CODE (insn) == NOTE) { if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END) loop_depth++; else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG) loop_depth--; } if (GET_RTX_CLASS (GET_CODE (insn)) == 'i') { int op_no, match_no; int success = 0; if (! find_matches (insn, &match)) continue; /* Now scan through the operands looking for a destination operand which is supposed to match a source operand. Then scan backward for an instruction which sets the source operand. If safe, then replace the source operand with the dest operand in both instructions. */ copy_src = NULL_RTX; copy_dst = NULL_RTX; for (op_no = 0; op_no < recog_n_operands; op_no++) { rtx set, p, src, dst; rtx src_note, dst_note; int num_calls = 0; enum reg_class src_class, dst_class; int length; match_no = match.with[op_no]; /* Nothing to do if the two operands aren't supposed to match. */ if (match_no < 0) continue; dst = recog_operand[match_no]; src = recog_operand[op_no]; if (GET_CODE (src) != REG) continue; if (GET_CODE (dst) != REG || REGNO (dst) < FIRST_PSEUDO_REGISTER || REG_LIVE_LENGTH (REGNO (dst)) < 0) continue; /* If the operands already match, then there is nothing to do. */ if (operands_match_p (src, dst) || (match.commutative[op_no] >= 0 && operands_match_p (recog_operand[match.commutative[op_no]], dst))) continue; set = single_set (insn); if (! set) continue; /* match_no/dst must be a write-only operand, and operand_operand/src must be a read-only operand. */ if (match.use[op_no] != READ || match.use[match_no] != WRITE) continue; if (match.early_clobber[match_no] && count_occurrences (PATTERN (insn), src) > 1) continue; /* Make sure match_no is the destination. */ if (recog_operand[match_no] != SET_DEST (set)) continue; if (REGNO (src) < FIRST_PSEUDO_REGISTER) { if (GET_CODE (SET_SRC (set)) == PLUS && GET_CODE (XEXP (SET_SRC (set), 1)) == CONST_INT && XEXP (SET_SRC (set), 0) == src && fixup_match_2 (insn, dst, src, XEXP (SET_SRC (set), 1), regmove_dump_file)) break; continue; } src_class = reg_preferred_class (REGNO (src)); dst_class = reg_preferred_class (REGNO (dst)); if (! regclass_compatible_p (src_class, dst_class)) { if (!copy_src) { copy_src = src; copy_dst = dst; } continue; } /* Can not modify an earlier insn to set dst if this insn uses an old value in the source. */ if (reg_overlap_mentioned_p (dst, SET_SRC (set))) { if (!copy_src) { copy_src = src; copy_dst = dst; } continue; } if (! (src_note = find_reg_note (insn, REG_DEAD, src))) { if (!copy_src) { copy_src = src; copy_dst = dst; } continue; } /* If src is set once in a different basic block, and is set equal to a constant, then do not use it for this optimization, as this would make it no longer equivalent to a constant. */ if (reg_is_remote_constant_p (src, insn, f)) { if (!copy_src) { copy_src = src; copy_dst = dst; } continue; } if (regmove_dump_file) fprintf (regmove_dump_file, "Could fix operand %d of insn %d matching operand %d.\n", op_no, INSN_UID (insn), match_no); /* Scan backward to find the first instruction that uses the input operand. If the operand is set here, then replace it in both instructions with match_no. */ for (length = 0, p = PREV_INSN (insn); p; p = PREV_INSN (p)) { rtx pset; if (GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN || (GET_CODE (p) == NOTE && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END))) break; /* ??? We can't scan past the end of a basic block without updating the register lifetime info (REG_DEAD/basic_block_live_at_start). A CALL_INSN might be the last insn of a basic block, if it is inside an EH region. There is no easy way to tell, so we just always break when we see a CALL_INSN if flag_exceptions is nonzero. */ if (flag_exceptions && GET_CODE (p) == CALL_INSN) break; if (GET_RTX_CLASS (GET_CODE (p)) != 'i') continue; length++; /* ??? See if all of SRC is set in P. This test is much more conservative than it needs to be. */ pset = single_set (p); if (pset && SET_DEST (pset) == src) { /* We use validate_replace_rtx, in case there are multiple identical source operands. All of them have to be changed at the same time. */ if (validate_replace_rtx (src, dst, insn)) { if (validate_change (p, &SET_DEST (pset), dst, 0)) success = 1; else { /* Change all source operands back. This modifies the dst as a side-effect. */ validate_replace_rtx (dst, src, insn); /* Now make sure the dst is right. */ validate_change (insn, recog_operand_loc[match_no], dst, 0); } } break; } if (reg_overlap_mentioned_p (src, PATTERN (p)) || reg_overlap_mentioned_p (dst, PATTERN (p))) break; /* If we have passed a call instruction, and the pseudo-reg DST is not already live across a call, then don't perform the optimization. */ if (GET_CODE (p) == CALL_INSN) { num_calls++; if (REG_N_CALLS_CROSSED (REGNO (dst)) == 0) break; } } if (success) { int dstno, srcno; /* Remove the death note for SRC from INSN. */ remove_note (insn, src_note); /* Move the death note for SRC to P if it is used there. */ if (reg_overlap_mentioned_p (src, PATTERN (p))) { XEXP (src_note, 1) = REG_NOTES (p); REG_NOTES (p) = src_note; } /* If there is a REG_DEAD note for DST on P, then remove it, because DST is now set there. */ if ((dst_note = find_reg_note (p, REG_DEAD, dst))) remove_note (p, dst_note); dstno = REGNO (dst); srcno = REGNO (src); REG_N_SETS (dstno)++; REG_N_SETS (srcno)--; REG_N_CALLS_CROSSED (dstno) += num_calls; REG_N_CALLS_CROSSED (srcno) -= num_calls; REG_LIVE_LENGTH (dstno) += length; if (REG_LIVE_LENGTH (srcno) >= 0) { REG_LIVE_LENGTH (srcno) -= length; /* REG_LIVE_LENGTH is only an approximation after combine if sched is not run, so make sure that we still have a reasonable value. */ if (REG_LIVE_LENGTH (srcno) < 2) REG_LIVE_LENGTH (srcno) = 2; } /* We assume that a register is used exactly once per insn in the updates above. If this is not correct, no great harm is done. */ REG_N_REFS (dstno) += 2 * loop_depth; REG_N_REFS (srcno) -= 2 * loop_depth; /* If that was the only time src was set, and src was not live at the start of the function, we know that we have no more references to src; clear REG_N_REFS so it won't make reload do any work. */ if (REG_N_SETS (REGNO (src)) == 0 && ! regno_uninitialized (REGNO (src))) REG_N_REFS (REGNO (src)) = 0; if (regmove_dump_file) fprintf (regmove_dump_file, "Fixed operand %d of insn %d matching operand %d.\n", op_no, INSN_UID (insn), match_no); break; } } /* If we weren't able to replace any of the alternatives, try an alternative appoach of copying the source to the destination. */ if (!success && copy_src != NULL_RTX) copy_src_to_dest (insn, copy_src, copy_dst, loop_depth, old_max_uid); } } #endif /* REGISTER_CONSTRAINTS */ /* In fixup_match_1, some insns may have been inserted after basic block ends. Fix that here. */ for (i = 0; i < n_basic_blocks; i++) { rtx end = BLOCK_END (i); rtx new = end; rtx next = NEXT_INSN (new); while (next != 0 && INSN_UID (next) >= old_max_uid && (i == n_basic_blocks - 1 || BLOCK_HEAD (i + 1) != next)) new = next, next = NEXT_INSN (new); BLOCK_END (i) = new; } } /* Returns nonzero if INSN's pattern has matching constraints for any operand. Returns 0 if INSN can't be recognized, or if the alternative can't be determined. Initialize the info in MATCHP based on the constraints. */ static int find_matches (insn, matchp) rtx insn; struct match *matchp; { int likely_spilled[MAX_RECOG_OPERANDS]; int op_no; int any_matches = 0; extract_insn (insn); if (! constrain_operands (0)) return 0; /* Must initialize this before main loop, because the code for the commutative case may set matches for operands other than the current one. */ for (op_no = recog_n_operands; --op_no >= 0; ) matchp->with[op_no] = matchp->commutative[op_no] = -1; for (op_no = 0; op_no < recog_n_operands; op_no++) { char *p, c; int i = 0; p = recog_constraints[op_no]; likely_spilled[op_no] = 0; matchp->use[op_no] = READ; matchp->early_clobber[op_no] = 0; if (*p == '=') matchp->use[op_no] = WRITE; else if (*p == '+') matchp->use[op_no] = READWRITE; for (;*p && i < which_alternative; p++) if (*p == ',') i++; while ((c = *p++) != '\0' && c != ',') switch (c) { case '=': break; case '+': break; case '&': matchp->early_clobber[op_no] = 1; break; case '%': matchp->commutative[op_no] = op_no + 1; matchp->commutative[op_no + 1] = op_no; break; case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': c -= '0'; if (c < op_no && likely_spilled[(unsigned char) c]) break; matchp->with[op_no] = c; any_matches = 1; if (matchp->commutative[op_no] >= 0) matchp->with[matchp->commutative[op_no]] = c; break; case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': case 'h': case 'j': case 'k': case 'l': case 'p': case 'q': case 't': case 'u': case 'v': case 'w': case 'x': case 'y': case 'z': case 'A': case 'B': case 'C': case 'D': case 'W': case 'Y': case 'Z': if (CLASS_LIKELY_SPILLED_P (REG_CLASS_FROM_LETTER ((unsigned char)c))) likely_spilled[op_no] = 1; break; } } return any_matches; } /* Try to replace output operand DST in SET, with input operand SRC. SET is the only set in INSN. INSN has just been recgnized and constrained. SRC is operand number OPERAND_NUMBER in INSN. DST is operand number MATCH_NUMBER in INSN. If BACKWARD is nonzero, we have been called in a backward pass. Return nonzero for success. */ static int fixup_match_1 (insn, set, src, src_subreg, dst, backward, operand_number, match_number, regmove_dump_file) rtx insn, set, src, src_subreg, dst; int backward, operand_number, match_number; FILE *regmove_dump_file; { rtx p; rtx post_inc = 0, post_inc_set = 0, search_end = 0; int success = 0; int num_calls = 0, s_num_calls = 0; enum rtx_code code = NOTE; HOST_WIDE_INT insn_const, newconst; rtx overlap = 0; /* need to move insn ? */ rtx src_note = find_reg_note (insn, REG_DEAD, src), dst_note; int length, s_length, true_loop_depth; if (! src_note) { /* Look for (set (regX) (op regA constX)) (set (regY) (op regA constY)) and change that to (set (regA) (op regA constX)). (set (regY) (op regA constY-constX)). This works for add and shift operations, if regA is dead after or set by the second insn. */ code = GET_CODE (SET_SRC (set)); if ((code == PLUS || code == LSHIFTRT || code == ASHIFT || code == ASHIFTRT) && XEXP (SET_SRC (set), 0) == src && GET_CODE (XEXP (SET_SRC (set), 1)) == CONST_INT) insn_const = INTVAL (XEXP (SET_SRC (set), 1)); else if (! stable_but_for_p (SET_SRC (set), src, dst)) return 0; else /* We might find a src_note while scanning. */ code = NOTE; } if (regmove_dump_file) fprintf (regmove_dump_file, "Could fix operand %d of insn %d matching operand %d.\n", operand_number, INSN_UID (insn), match_number); /* If SRC is equivalent to a constant set in a different basic block, then do not use it for this optimization. We want the equivalence so that if we have to reload this register, we can reload the constant, rather than extending the lifespan of the register. */ if (reg_is_remote_constant_p (src, insn, get_insns ())) return 0; /* Scan forward to find the next instruction that uses the output operand. If the operand dies here, then replace it in both instructions with operand_number. */ for (length = s_length = 0, p = NEXT_INSN (insn); p; p = NEXT_INSN (p)) { if (GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN || (GET_CODE (p) == NOTE && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END))) break; /* ??? We can't scan past the end of a basic block without updating the register lifetime info (REG_DEAD/basic_block_live_at_start). A CALL_INSN might be the last insn of a basic block, if it is inside an EH region. There is no easy way to tell, so we just always break when we see a CALL_INSN if flag_exceptions is nonzero. */ if (flag_exceptions && GET_CODE (p) == CALL_INSN) break; if (GET_RTX_CLASS (GET_CODE (p)) != 'i') continue; length++; if (src_note) s_length++; if (reg_set_p (src, p) || reg_set_p (dst, p) || (GET_CODE (PATTERN (p)) == USE && reg_overlap_mentioned_p (src, XEXP (PATTERN (p), 0)))) break; /* See if all of DST dies in P. This test is slightly more conservative than it needs to be. */ if ((dst_note = find_regno_note (p, REG_DEAD, REGNO (dst))) && (GET_MODE (XEXP (dst_note, 0)) == GET_MODE (dst))) { if (! src_note) { rtx q; rtx set2; /* If an optimization is done, the value of SRC while P is executed will be changed. Check that this is OK. */ if (reg_overlap_mentioned_p (src, PATTERN (p))) break; for (q = p; q; q = NEXT_INSN (q)) { if (GET_CODE (q) == CODE_LABEL || GET_CODE (q) == JUMP_INSN || (GET_CODE (q) == NOTE && (NOTE_LINE_NUMBER (q) == NOTE_INSN_LOOP_BEG || NOTE_LINE_NUMBER (q) == NOTE_INSN_LOOP_END))) { q = 0; break; } /* ??? We can't scan past the end of a basic block without updating the register lifetime info (REG_DEAD/basic_block_live_at_start). A CALL_INSN might be the last insn of a basic block, if it is inside an EH region. There is no easy way to tell, so we just always break when we see a CALL_INSN if flag_exceptions is nonzero. */ if (flag_exceptions && GET_CODE (q) == CALL_INSN) { q = 0; break; } if (GET_RTX_CLASS (GET_CODE (q)) != 'i') continue; if (reg_overlap_mentioned_p (src, PATTERN (q)) || reg_set_p (src, q)) break; } if (q) set2 = single_set (q); if (! q || ! set2 || GET_CODE (SET_SRC (set2)) != code || XEXP (SET_SRC (set2), 0) != src || GET_CODE (XEXP (SET_SRC (set2), 1)) != CONST_INT || (SET_DEST (set2) != src && ! find_reg_note (q, REG_DEAD, src))) { /* If this is a PLUS, we can still save a register by doing src += insn_const; P; src -= insn_const; . This also gives opportunities for subsequent optimizations in the backward pass, so do it there. */ if (code == PLUS && backward /* Don't do this if we can likely tie DST to SET_DEST of P later; we can't do this tying here if we got a hard register. */ && ! (dst_note && ! REG_N_CALLS_CROSSED (REGNO (dst)) && single_set (p) && GET_CODE (SET_DEST (single_set (p))) == REG && (REGNO (SET_DEST (single_set (p))) < FIRST_PSEUDO_REGISTER)) #ifdef HAVE_cc0 /* We may not emit an insn directly after P if the latter sets CC0. */ && ! sets_cc0_p (PATTERN (p)) #endif ) { search_end = q; q = insn; set2 = set; newconst = -insn_const; code = MINUS; } else break; } else { newconst = INTVAL (XEXP (SET_SRC (set2), 1)) - insn_const; /* Reject out of range shifts. */ if (code != PLUS && (newconst < 0 || (newconst >= GET_MODE_BITSIZE (GET_MODE (SET_SRC (set2)))))) break; if (code == PLUS) { post_inc = q; if (SET_DEST (set2) != src) post_inc_set = set2; } } /* We use 1 as last argument to validate_change so that all changes are accepted or rejected together by apply_change_group when it is called by validate_replace_rtx . */ validate_change (q, &XEXP (SET_SRC (set2), 1), GEN_INT (newconst), 1); } validate_change (insn, recog_operand_loc[match_number], src, 1); if (validate_replace_rtx (dst, src_subreg, p)) success = 1; break; } if (reg_overlap_mentioned_p (dst, PATTERN (p))) break; if (! src_note && reg_overlap_mentioned_p (src, PATTERN (p))) { /* INSN was already checked to be movable when we found no REG_DEAD note for src on it. */ overlap = p; src_note = find_reg_note (p, REG_DEAD, src); } /* If we have passed a call instruction, and the pseudo-reg SRC is not already live across a call, then don't perform the optimization. */ if (GET_CODE (p) == CALL_INSN) { if (REG_N_CALLS_CROSSED (REGNO (src)) == 0) break; num_calls++; if (src_note) s_num_calls++; } } if (! success) return 0; true_loop_depth = backward ? 2 - loop_depth : loop_depth; /* Remove the death note for DST from P. */ remove_note (p, dst_note); if (code == MINUS) { post_inc = emit_insn_after (copy_rtx (PATTERN (insn)), p); if ((HAVE_PRE_INCREMENT || HAVE_PRE_DECREMENT) && search_end && try_auto_increment (search_end, post_inc, 0, src, newconst, 1)) post_inc = 0; validate_change (insn, &XEXP (SET_SRC (set), 1), GEN_INT (insn_const), 0); REG_N_SETS (REGNO (src))++; REG_N_REFS (REGNO (src)) += true_loop_depth; REG_LIVE_LENGTH (REGNO (src))++; } if (overlap) { /* The lifetime of src and dest overlap, but we can change this by moving insn. */ rtx pat = PATTERN (insn); if (src_note) remove_note (overlap, src_note); #if defined (HAVE_POST_INCREMENT) || defined (HAVE_POST_DECREMENT) if (code == PLUS && try_auto_increment (overlap, insn, 0, src, insn_const, 0)) insn = overlap; else #endif { rtx notes = REG_NOTES (insn); emit_insn_after_with_line_notes (pat, PREV_INSN (p), insn); PUT_CODE (insn, NOTE); NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED; NOTE_SOURCE_FILE (insn) = 0; /* emit_insn_after_with_line_notes has no return value, so search for the new insn. */ for (insn = p; PATTERN (insn) != pat; ) insn = PREV_INSN (insn); REG_NOTES (insn) = notes; } } /* Sometimes we'd generate src = const; src += n; if so, replace the instruction that set src in the first place. */ if (! overlap && (code == PLUS || code == MINUS)) { rtx note = find_reg_note (insn, REG_EQUAL, NULL_RTX); rtx q, set2; int num_calls2 = 0, s_length2 = 0; if (note && CONSTANT_P (XEXP (note, 0))) { for (q = PREV_INSN (insn); q; q = PREV_INSN(q)) { if (GET_CODE (q) == CODE_LABEL || GET_CODE (q) == JUMP_INSN || (GET_CODE (q) == NOTE && (NOTE_LINE_NUMBER (q) == NOTE_INSN_LOOP_BEG || NOTE_LINE_NUMBER (q) == NOTE_INSN_LOOP_END))) { q = 0; break; } /* ??? We can't scan past the end of a basic block without updating the register lifetime info (REG_DEAD/basic_block_live_at_start). A CALL_INSN might be the last insn of a basic block, if it is inside an EH region. There is no easy way to tell, so we just always break when we see a CALL_INSN if flag_exceptions is nonzero. */ if (flag_exceptions && GET_CODE (q) == CALL_INSN) { q = 0; break; } if (GET_RTX_CLASS (GET_CODE (q)) != 'i') continue; s_length2++; if (reg_set_p (src, q)) { set2 = single_set (q); break; } if (reg_overlap_mentioned_p (src, PATTERN (q))) { q = 0; break; } if (GET_CODE (p) == CALL_INSN) num_calls2++; } if (q && set2 && SET_DEST (set2) == src && CONSTANT_P (SET_SRC (set2)) && validate_change (insn, &SET_SRC (set), XEXP (note, 0), 0)) { PUT_CODE (q, NOTE); NOTE_LINE_NUMBER (q) = NOTE_INSN_DELETED; NOTE_SOURCE_FILE (q) = 0; REG_N_SETS (REGNO (src))--; REG_N_CALLS_CROSSED (REGNO (src)) -= num_calls2; REG_N_REFS (REGNO (src)) -= true_loop_depth; REG_LIVE_LENGTH (REGNO (src)) -= s_length2; insn_const = 0; } } } /* Don't remove this seemingly useless if, it is needed to pair with the else in the next two conditionally included code blocks. */ if (0) {;} else if ((HAVE_PRE_INCREMENT || HAVE_PRE_DECREMENT) && (code == PLUS || code == MINUS) && insn_const && try_auto_increment (p, insn, 0, src, insn_const, 1)) insn = p; else if ((HAVE_POST_INCREMENT || HAVE_POST_DECREMENT) && post_inc && try_auto_increment (p, post_inc, post_inc_set, src, newconst, 0)) post_inc = 0; /* If post_inc still prevails, try to find an insn where it can be used as a pre-in/decrement. If code is MINUS, this was already tried. */ if (post_inc && code == PLUS /* Check that newconst is likely to be usable in a pre-in/decrement before starting the search. */ && ((HAVE_PRE_INCREMENT && newconst > 0 && newconst <= MOVE_MAX) || (HAVE_PRE_DECREMENT && newconst < 0 && newconst >= -MOVE_MAX)) && exact_log2 (newconst)) { rtx q, inc_dest; inc_dest = post_inc_set ? SET_DEST (post_inc_set) : src; for (q = post_inc; (q = NEXT_INSN (q)); ) { if (GET_CODE (q) == CODE_LABEL || GET_CODE (q) == JUMP_INSN || (GET_CODE (q) == NOTE && (NOTE_LINE_NUMBER (q) == NOTE_INSN_LOOP_BEG || NOTE_LINE_NUMBER (q) == NOTE_INSN_LOOP_END))) break; /* ??? We can't scan past the end of a basic block without updating the register lifetime info (REG_DEAD/basic_block_live_at_start). A CALL_INSN might be the last insn of a basic block, if it is inside an EH region. There is no easy way to tell so we just always break when we see a CALL_INSN if flag_exceptions is nonzero. */ if (flag_exceptions && GET_CODE (q) == CALL_INSN) break; if (GET_RTX_CLASS (GET_CODE (q)) != 'i') continue; if (src != inc_dest && (reg_overlap_mentioned_p (src, PATTERN (q)) || reg_set_p (src, q))) break; if (reg_set_p (inc_dest, q)) break; if (reg_overlap_mentioned_p (inc_dest, PATTERN (q))) { try_auto_increment (q, post_inc, post_inc_set, inc_dest, newconst, 1); break; } } } /* Move the death note for DST to INSN if it is used there. */ if (reg_overlap_mentioned_p (dst, PATTERN (insn))) { XEXP (dst_note, 1) = REG_NOTES (insn); REG_NOTES (insn) = dst_note; } if (src_note) { /* Move the death note for SRC from INSN to P. */ if (! overlap) remove_note (insn, src_note); XEXP (src_note, 1) = REG_NOTES (p); REG_NOTES (p) = src_note; REG_N_CALLS_CROSSED (REGNO (src)) += s_num_calls; } REG_N_SETS (REGNO (src))++; REG_N_SETS (REGNO (dst))--; REG_N_CALLS_CROSSED (REGNO (dst)) -= num_calls; REG_LIVE_LENGTH (REGNO (src)) += s_length; if (REG_LIVE_LENGTH (REGNO (dst)) >= 0) { REG_LIVE_LENGTH (REGNO (dst)) -= length; /* REG_LIVE_LENGTH is only an approximation after combine if sched is not run, so make sure that we still have a reasonable value. */ if (REG_LIVE_LENGTH (REGNO (dst)) < 2) REG_LIVE_LENGTH (REGNO (dst)) = 2; } /* We assume that a register is used exactly once per insn in the updates above. If this is not correct, no great harm is done. */ REG_N_REFS (REGNO (src)) += 2 * true_loop_depth; REG_N_REFS (REGNO (dst)) -= 2 * true_loop_depth; /* If that was the only time dst was set, and dst was not live at the start of the function, we know that we have no more references to dst; clear REG_N_REFS so it won't make reload do any work. */ if (REG_N_SETS (REGNO (dst)) == 0 && ! regno_uninitialized (REGNO (dst))) REG_N_REFS (REGNO (dst)) = 0; if (regmove_dump_file) fprintf (regmove_dump_file, "Fixed operand %d of insn %d matching operand %d.\n", operand_number, INSN_UID (insn), match_number); return 1; } /* return nonzero if X is stable but for mentioning SRC or mentioning / changing DST . If in doubt, presume it is unstable. */ static int stable_but_for_p (x, src, dst) rtx x, src, dst; { RTX_CODE code = GET_CODE (x); switch (GET_RTX_CLASS (code)) { case '<': case '1': case 'c': case '2': case 'b': case '3': { int i; char *fmt = GET_RTX_FORMAT (code); for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) if (fmt[i] == 'e' && ! stable_but_for_p (XEXP (x, i), src, dst)) return 0; return 1; } case 'o': if (x == src || x == dst) return 1; /* fall through */ default: return ! rtx_unstable_p (x); } } /* Test if regmove seems profitable for this target. Regmove is useful only if some common patterns are two address, i.e. require matching constraints, so we check that condition here. */ int regmove_profitable_p () { #ifdef REGISTER_CONSTRAINTS struct match match; enum machine_mode mode; optab tstoptab = add_optab; do /* check add_optab and ashl_optab */ for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode; mode = GET_MODE_WIDER_MODE (mode)) { int icode = (int) tstoptab->handlers[(int) mode].insn_code; rtx reg0, reg1, reg2, pat; int i; if (GET_MODE_BITSIZE (mode) < 32 || icode == CODE_FOR_nothing) continue; for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) if (TEST_HARD_REG_BIT (reg_class_contents[GENERAL_REGS], i)) break; if (i + 2 >= FIRST_PSEUDO_REGISTER) break; reg0 = gen_rtx_REG (insn_operand_mode[icode][0], i); reg1 = gen_rtx_REG (insn_operand_mode[icode][1], i + 1); reg2 = gen_rtx_REG (insn_operand_mode[icode][2], i + 2); if (! (*insn_operand_predicate[icode][0]) (reg0, VOIDmode) || ! (*insn_operand_predicate[icode][1]) (reg1, VOIDmode) || ! (*insn_operand_predicate[icode][2]) (reg2, VOIDmode)) break; pat = GEN_FCN (icode) (reg0, reg1, reg2); if (! pat) continue; if (GET_CODE (pat) == SEQUENCE) pat = XVECEXP (pat, 0, XVECLEN (pat, 0) - 1); else pat = make_insn_raw (pat); if (! single_set (pat) || GET_CODE (SET_SRC (single_set (pat))) != tstoptab->code) /* Unexpected complexity; don't need to handle this unless we find a machine where this occurs and regmove should be enabled. */ break; if (find_matches (pat, &match)) return 1; break; } while (tstoptab != ashl_optab && (tstoptab = ashl_optab, 1)); #endif /* REGISTER_CONSTRAINTS */ return 0; }