require_relative "nodes"

module Arm
  # ADDRESSING MODE 2
  # Implemented: immediate offset with offset=0
  class MemoryInstruction < Vm::MemoryInstruction
    include Arm::Constants

    def initialize(first , attributes)
      super(first , attributes)
      @attributes[:update_status] = 0 if @attributes[:update_status] == nil
      @attributes[:condition_code] = :al if @attributes[:condition_code] == nil
      @operand = 0

      @pre_post_index = 0 #P flag
      @add_offset = 0 #U flag
      @is_load = opcode.to_s[0] == "l" ? 1 : 0 #L (load) flag
    end
#    attr_accessor :i, :pre_post_index, :add_offset, :byte_access, :w, :is_load, :rn, :rd

    # arm intrucioons are pretty sensible, and always 4 bytes (thumb not supported)
    def length
      4
    end
                  
    # Build representation for target address
    def build
      arg = @attributes[:right]
      arg = "r#{arg.register}".to_sym if( arg.is_a? Vm::Word )
      #str / ldr are _serious instructions. With BIG possibilities not half are implemented
      if (arg.is_a?(Symbol)) #symbol is register
        @rn = arg
        if @attributes[:offset]
          @operand = @attributes[:offset]
          if (@operand < 0)
            @add_offset = 0
            #TODO test/check/understand
            @operand *= -1
          else
            @add_offset = 1
          end
          if (@operand.abs > 4095)
            raise "reference offset too large/small (max 4095) #{arg} #{inspect}"
          end
        end
      elsif (arg.is_a?(Vm::StringConstant) ) #use pc relative
        @rn = :pc
        @operand = arg.position - self.position  - 8 #stringtable is after code
        @add_offset = 1
        if (@operand.abs > 4095)
          raise "reference offset too large/small (max 4095) #{arg} #{inspect}"
        end
      elsif( arg.is_a?(Vm::IntegerConstant) )
        raise "is this working ??  #{arg} #{inspect}"
        @pre_post_index = 1
        @rn = pc
        @use_addrtable_reloc = true
        @addrtable_reloc_target = arg
      else
        raise "invalid operand argument #{arg.inspect} #{inspect}"
      end
    end

    def assemble(io)
      build
      i = 0 #I flag (third bit)
      #not sure about these 2 constants. They produce the correct output for str r0 , r1
      # but i can't help thinking that that is because they are not used in that instruction and
      # so it doesn't matter. Will see
      @add_offset = 1
      @pre_post_index = 1
      w = 0 #W flag
      byte_access = opcode.to_s[-1] == "b" ? 1 : 0 #B (byte) flag
      instuction_class =  0b01 # OPC_MEMORY_ACCESS
      val = @operand
      val = reg_code(@operand) if @operand.is_a?(Symbol)
      val = shift(val , 0 ) # for the test
      val |= shift(reg_code(@first) ,        12 )  
      val |= shift(reg_code(@rn) ,        12+4) #16  
      val |= shift(@is_load ,        12+4  +4)
      val |= shift(w ,              12+4  +4+1)
      val |= shift(byte_access ,    12+4  +4+1+1)
      val |= shift(@add_offset ,     12+4  +4+1+1+1)
      val |= shift(@pre_post_index , 12+4  +4+1+1+1+1)#24
      val |= shift(i ,              12+4  +4+1+1+1+1  +1) 
      val |= shift(instuction_class,12+4  +4+1+1+1+1  +1+1)  
      val |= shift(cond_bit_code ,  12+4  +4+1+1+1+1  +1+1+2)
      io.write_uint32 val
    end
    def shift val , by
      raise "Not integer #{val}:#{val.class} #{inspect}" unless val.is_a? Fixnum
      val << by
    end
  end
end