initial commit

mpv/input.conf

@@ -0,0 +1,91 @@
+
+##
+## MPlayer-style key bindings
+##
+## Save it as ~/.config/mpv/input.conf to use it.
+##
+## Generally, it's recommended to use this as reference-only.
+##
+
+RIGHT seek +10
+LEFT seek -10
+DOWN seek -60
+UP seek +60
+PGUP seek 600
+PGDWN seek -600
+h seek -10
+t seek -60
+n seek +60
+s seek +10
+m cycle mute
+SHARP cycle audio           # switch audio streams
+d add audio-delay 0.100
+D add audio-delay -0.100
+[ multiply speed 0.9091	# scale playback speed
+] multiply speed 1.1
+{ multiply speed 0.5
+} multiply speed 2.0
+BS set speed 1.0	# reset speed to normal
+q quit
+ESC quit
+ENTER playlist-next force       # skip to next file
+p cycle pause
+. frame-step            # advance one frame and pause
+SPACE cycle pause
+HOME set playlist-pos 0 # not the same as MPlayer
+#END pt_up_step -1
+> playlist-next             # skip to next file
+< playlist-prev             #         previous
+#INS alt_src_step 1
+#DEL alt_src_step -1
+o osd
+I show-text "${filename}"     # display filename in osd
+P show-progress
+z add sub-delay -0.1        # subtract 100 ms delay from subs
+x add sub-delay +0.1        # add
+- add volume -1
++ add volume 1
+1 add contrast -1
+2 add contrast 1
+3 add brightness -1
+4 add brightness 1
+5 add hue -1
+6 add hue 1
+7 add saturation -1
+8 add saturation 1
+( add balance -0.1          # adjust audio balance in favor of left
+) add balance +0.1          #                                  right
+d cycle framedrop
+D cycle deinterlace # toggle deinterlacer (auto-inserted filter)
+r add sub-pos -1            # move subtitles up
+#t add sub-pos +1            #                down
+#? sub-step +1		# immediately display next subtitle
+#? sub-step -1		#                     previous
+#? add sub-scale +0.1	# increase subtitle font size
+#? add sub-scale -0.1	# decrease subtitle font size
+f cycle fullscreen
+T cycle ontop              # toggle video window ontop of other windows
+w add panscan -0.1          # zoom out with -panscan 0 -fs
+e add panscan +0.1          #      in
+c cycle stream-capture             # save (and append) file/stream to stream.dump with -capture
+S screenshot            # take a screenshot (if you want PNG, use "--screenshot-format=png")
+
+#b tv_step_chanlist
+
+#? add chapter -1      # skip to previous dvd chapter
+#? add chapter +1      #         next
+
+##
+## Advanced seek
+## Uncomment the following lines to be able to seek to n% of the media with
+## the Fx keys.
+##
+#F1 seek 10 absolute-percent
+#F2 seek 20 absolute-percent
+#F3 seek 30 absolute-percent
+#F4 seek 40 absolute-percent
+#F5 seek 50 absolute-percent
+#F6 seek 60 absolute-percent
+#F7 seek 70 absolute-percent
+#F8 seek 80 absolute-percent
+#F9 seek 90 absolute-percent

mpv/mpv.conf

@@ -0,0 +1,138 @@
+#
+# Example mpv configuration file
+#
+# Warning:
+#
+# The commented example options usually do _not_ set the default values. Call
+# mpv with --list-options to see the default values for most options. There is
+# no builtin or example mpv.conf with all the defaults.
+#
+#
+# Configuration files are read system-wide from /usr/local/etc/mpv.conf
+# and per-user from ~/.config/mpv/mpv.conf, where per-user settings override
+# system-wide settings, all of which are overridden by the command line.
+#
+# Configuration file settings and the command line options use the same
+# underlying mechanisms. Most options can be put into the configuration file
+# by dropping the preceding '--'. See the man page for a complete list of
+# options.
+#
+# Lines starting with '#' are comments and are ignored.
+#
+# See the CONFIGURATION FILES section in the man page
+# for a detailed description of the syntax.
+#
+# Profiles should be placed at the bottom of the configuration file to ensure
+# that settings wanted as defaults are not restricted to specific profiles.
+
+##################
+# video settings #
+##################
+
+# Start in fullscreen mode by default.
+#fs=yes
+
+# force starting with centered window
+#geometry=50%:50%
+
+# don't allow a new window to have a size larger than 90% of the screen size
+#autofit-larger=90%x90%
+
+# Do not close the window on exit.
+#keep-open=yes
+
+# Do not wait with showing the video window until it has loaded. (This will
+# resize the window once video is loaded. Also always shows a window with
+# audio.)
+#force-window=immediate
+
+# Disable the On Screen Controller (OSC).
+#osc=no
+
+# Keep the player window on top of all other windows.
+#ontop=yes
+
+# Specify high quality video rendering preset (for --vo=gpu only)
+# Can cause performance problems with some drivers and GPUs.
+#profile=gpu-hq
+
+# Force video to lock on the display's refresh rate, and change video and audio
+# speed to some degree to ensure synchronous playback - can cause problems
+# with some drivers and desktop environments.
+#video-sync=display-resample
+
+# Enable hardware decoding if available. Often, this does not work with all
+# video outputs, but should work well with default settings on most systems.
+# If performance or energy usage is an issue, forcing the vdpau or vaapi VOs
+# may or may not help.
+#hwdec=auto
+
+##################
+# audio settings #
+##################
+
+# Specify default audio device. You can list devices with: --audio-device=help
+# The option takes the device string (the stuff between the '...').
+#audio-device=alsa/default
+
+# Do not filter audio to keep pitch when changing playback speed.
+#audio-pitch-correction=no
+
+# Output 5.1 audio natively, and upmix/downmix audio with a different format.
+#audio-channels=5.1
+# Disable any automatic remix, _if_ the audio output accepts the audio format.
+# of the currently played file. See caveats mentioned in the manpage.
+# (The default is "auto-safe", see manpage.)
+#audio-channels=auto
+
+##################
+# other settings #
+##################
+
+# Pretend to be a web browser. Might fix playback with some streaming sites,
+# but also will break with shoutcast streams.
+#user-agent="Mozilla/5.0"
+
+# cache settings
+#
+# Use a large seekable RAM cache even for local input.
+#cache=yes
+#
+# Use extra large RAM cache (needs cache=yes to make it useful).
+#demuxer-max-bytes=500M
+#demuxer-max-back-bytes=100M
+#
+# Disable the behavior that the player will pause if the cache goes below a
+# certain fill size.
+#cache-pause=no
+#
+# Store cache payload on the hard disk instead of in RAM. (This may negatively
+# impact performance unless used for slow input such as network.)
+#cache-dir=~/.cache/
+#cache-on-disk=yes
+
+# Display English subtitles if available.
+#slang=en
+
+# Play Finnish audio if available, fall back to English otherwise.
+#alang=fi,en
+
+# Change subtitle encoding. For Arabic subtitles use 'cp1256'.
+# If the file seems to be valid UTF-8, prefer UTF-8.
+# (You can add '+' in front of the codepage to force it.)
+#sub-codepage=cp1256
+
+# You can also include other configuration files.
+#include=/path/to/the/file/you/want/to/include
+
+############
+# Profiles #
+############
+
+# The options declared as part of profiles override global default settings,
+# but only take effect when the profile is active.
+
+# The following profile can be enabled on the command line with: --profile=eye-cancer
+
+#[eye-cancer]
+#sharpen=5