diff --git a/.mvn/wrapper/maven-wrapper.jar b/.mvn/wrapper/maven-wrapper.jar
index bf82ff01c..7967f30dd 100644
Binary files a/.mvn/wrapper/maven-wrapper.jar and b/.mvn/wrapper/maven-wrapper.jar differ
diff --git a/.mvn/wrapper/maven-wrapper.properties b/.mvn/wrapper/maven-wrapper.properties
index 30052152b..746205252 100644
--- a/.mvn/wrapper/maven-wrapper.properties
+++ b/.mvn/wrapper/maven-wrapper.properties
@@ -6,7 +6,7 @@
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
-# https://www.apache.org/licenses/LICENSE-2.0
+# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
@@ -14,5 +14,7 @@
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
-distributionUrl=https://repo.maven.apache.org/maven2/org/apache/maven/apache-maven/3.8.4/apache-maven-3.8.4-bin.zip
-wrapperUrl=https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.1.1/maven-wrapper-3.1.1.jar
+wrapperVersion=3.3.2
+distributionType=bin
+distributionUrl=https://repo.maven.apache.org/maven2/org/apache/maven/apache-maven/3.9.8/apache-maven-3.9.8-bin.zip
+wrapperUrl=https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.3.2/maven-wrapper-3.3.2.jar
diff --git a/CONTRIBUTE.md b/CONTRIBUTE.md
index 3b55ecb94..d35a2bca2 100644
--- a/CONTRIBUTE.md
+++ b/CONTRIBUTE.md
@@ -20,7 +20,7 @@ The following software is required to work with the Debezium codebase and build
* [Git 2.2.1](https://git-scm.com) or later
* JDK 11 or later, e.g. [OpenJDK](http://openjdk.java.net/projects/jdk/)
-* [Apache Maven](https://maven.apache.org/index.html) 3.8.4
+* [Apache Maven](https://maven.apache.org/index.html) 3.9.8
* [Docker Engine](https://docs.docker.com/engine/install/) or [Docker Desktop](https://docs.docker.com/desktop/) 1.9 or later
See the links above for installation instructions on your platform. You can verify the versions are installed and running:
diff --git a/README.md b/README.md
index 3dcd9aeba..ae0dcca31 100644
--- a/README.md
+++ b/README.md
@@ -56,7 +56,7 @@ The following software is required to work with the Debezium codebase and build
* [Git](https://git-scm.com) 2.2.1 or later
* JDK 17 or later, e.g. [OpenJDK](http://openjdk.java.net/projects/jdk/)
* [Docker Engine](https://docs.docker.com/engine/install/) or [Docker Desktop](https://docs.docker.com/desktop/) 1.9 or later
-* [Apache Maven](https://maven.apache.org/index.html) 3.8.4 or later
+* [Apache Maven](https://maven.apache.org/index.html) 3.9.8 or later
(or invoke the wrapper with `./mvnw` for Maven commands)
See the links above for installation instructions on your platform. You can verify the versions are installed and running:
diff --git a/README_JA.md b/README_JA.md
index 6cae78bd7..10b481061 100644
--- a/README_JA.md
+++ b/README_JA.md
@@ -56,7 +56,7 @@ Debezium のコードベースでを編集・ビルドする為には以下に
* [Git](https://git-scm.com) 2.2.1 or later
* JDK 11 or later, e.g. [OpenJDK](http://openjdk.java.net/projects/jdk/)
-* [Apache Maven](https://maven.apache.org/index.html) 3.8.4
+* [Apache Maven](https://maven.apache.org/index.html) 3.9.8
* [Docker Engine](https://docs.docker.com/engine/install/) or [Docker Desktop](https://docs.docker.com/desktop/) 1.9 or later
インストール手順については上記のリンクを参照して下さい。インストールされているバージョンを確認する為には以下のコマンドを実行します:
diff --git a/README_KO.md b/README_KO.md
index 7dd575492..096f62870 100644
--- a/README_KO.md
+++ b/README_KO.md
@@ -62,7 +62,7 @@ CDC(Change Data Capture)를 사용하면 데이터가 오리지널 데이터베
* [Git](https://git-scm.com) 2.2.1 버전 이상
* JDK 17 버전 이상, 예) [OpenJDK](http://openjdk.java.net/projects/jdk/)
* [Docker Engine](https://docs.docker.com/engine/install/) 또는 [Docker Desktop](https://docs.docker.com/desktop/) 1.9 버전 이상
-* [Apache Maven](https://maven.apache.org/index.html) 3.8.4 버전 이상
+* [Apache Maven](https://maven.apache.org/index.html) 3.9.8 버전 이상
(or invoke the wrapper with `./mvnw` for Maven commands)
각 소프트웨어를 설치하기 위해서는 위의 링크의 지침을 확인하세요. 아래의 명령어를 통해 설치되었는지 확인할 수 있습니다.
diff --git a/README_ZH.md b/README_ZH.md
index 1e859790c..ead1bc902 100644
--- a/README_ZH.md
+++ b/README_ZH.md
@@ -54,7 +54,7 @@ Debezium有很多非常有价值的使用场景,我们在这儿仅仅列出几
* [Git](https://git-scm.com) 2.2.1 or later
* JDK 17 or later, e.g. [OpenJDK](http://openjdk.java.net/projects/jdk/)
-* [Apache Maven](https://maven.apache.org/index.html) 3.8.4
+* [Apache Maven](https://maven.apache.org/index.html) 3.9.8
* [Docker Engine](https://docs.docker.com/engine/install/) or [Docker Desktop](https://docs.docker.com/desktop/) 1.9 or later
有关平台上的安装说明,请参阅上面的链接。您可以通过以下指令查看安装版本
diff --git a/mvnw b/mvnw
index b7f064624..5e9618cac 100755
--- a/mvnw
+++ b/mvnw
@@ -19,7 +19,7 @@
# ----------------------------------------------------------------------------
# ----------------------------------------------------------------------------
-# Apache Maven Wrapper startup batch script, version 3.1.1
+# Apache Maven Wrapper startup batch script, version 3.3.2
#
# Required ENV vars:
# ------------------
@@ -33,252 +33,297 @@
# MAVEN_SKIP_RC - flag to disable loading of mavenrc files
# ----------------------------------------------------------------------------
-if [ -z "$MAVEN_SKIP_RC" ] ; then
+if [ -z "$MAVEN_SKIP_RC" ]; then
- if [ -f /usr/local/etc/mavenrc ] ; then
+ if [ -f /usr/local/etc/mavenrc ]; then
. /usr/local/etc/mavenrc
fi
- if [ -f /etc/mavenrc ] ; then
+ if [ -f /etc/mavenrc ]; then
. /etc/mavenrc
fi
- if [ -f "$HOME/.mavenrc" ] ; then
+ if [ -f "$HOME/.mavenrc" ]; then
. "$HOME/.mavenrc"
fi
fi
# OS specific support. $var _must_ be set to either true or false.
-cygwin=false;
-darwin=false;
+cygwin=false
+darwin=false
mingw=false
-case "`uname`" in
- CYGWIN*) cygwin=true ;;
- MINGW*) mingw=true;;
- Darwin*) darwin=true
- # Use /usr/libexec/java_home if available, otherwise fall back to /Library/Java/Home
- # See https://developer.apple.com/library/mac/qa/qa1170/_index.html
- if [ -z "$JAVA_HOME" ]; then
- if [ -x "/usr/libexec/java_home" ]; then
- JAVA_HOME="`/usr/libexec/java_home`"; export JAVA_HOME
- else
- JAVA_HOME="/Library/Java/Home"; export JAVA_HOME
- fi
+case "$(uname)" in
+CYGWIN*) cygwin=true ;;
+MINGW*) mingw=true ;;
+Darwin*)
+ darwin=true
+ # Use /usr/libexec/java_home if available, otherwise fall back to /Library/Java/Home
+ # See https://developer.apple.com/library/mac/qa/qa1170/_index.html
+ if [ -z "$JAVA_HOME" ]; then
+ if [ -x "/usr/libexec/java_home" ]; then
+ JAVA_HOME="$(/usr/libexec/java_home)"
+ export JAVA_HOME
+ else
+ JAVA_HOME="/Library/Java/Home"
+ export JAVA_HOME
fi
- ;;
+ fi
+ ;;
esac
-if [ -z "$JAVA_HOME" ] ; then
- if [ -r /etc/gentoo-release ] ; then
- JAVA_HOME=`java-config --jre-home`
+if [ -z "$JAVA_HOME" ]; then
+ if [ -r /etc/gentoo-release ]; then
+ JAVA_HOME=$(java-config --jre-home)
fi
fi
# For Cygwin, ensure paths are in UNIX format before anything is touched
-if $cygwin ; then
- [ -n "$JAVA_HOME" ] &&
- JAVA_HOME=`cygpath --unix "$JAVA_HOME"`
- [ -n "$CLASSPATH" ] &&
- CLASSPATH=`cygpath --path --unix "$CLASSPATH"`
+if $cygwin; then
+ [ -n "$JAVA_HOME" ] \
+ && JAVA_HOME=$(cygpath --unix "$JAVA_HOME")
+ [ -n "$CLASSPATH" ] \
+ && CLASSPATH=$(cygpath --path --unix "$CLASSPATH")
fi
# For Mingw, ensure paths are in UNIX format before anything is touched
-if $mingw ; then
- [ -n "$JAVA_HOME" ] &&
- JAVA_HOME="`(cd "$JAVA_HOME"; pwd)`"
+if $mingw; then
+ [ -n "$JAVA_HOME" ] && [ -d "$JAVA_HOME" ] \
+ && JAVA_HOME="$(
+ cd "$JAVA_HOME" || (
+ echo "cannot cd into $JAVA_HOME." >&2
+ exit 1
+ )
+ pwd
+ )"
fi
if [ -z "$JAVA_HOME" ]; then
- javaExecutable="`which javac`"
- if [ -n "$javaExecutable" ] && ! [ "`expr \"$javaExecutable\" : '\([^ ]*\)'`" = "no" ]; then
+ javaExecutable="$(which javac)"
+ if [ -n "$javaExecutable" ] && ! [ "$(expr "$javaExecutable" : '\([^ ]*\)')" = "no" ]; then
# readlink(1) is not available as standard on Solaris 10.
- readLink=`which readlink`
- if [ ! `expr "$readLink" : '\([^ ]*\)'` = "no" ]; then
- if $darwin ; then
- javaHome="`dirname \"$javaExecutable\"`"
- javaExecutable="`cd \"$javaHome\" && pwd -P`/javac"
+ readLink=$(which readlink)
+ if [ ! "$(expr "$readLink" : '\([^ ]*\)')" = "no" ]; then
+ if $darwin; then
+ javaHome="$(dirname "$javaExecutable")"
+ javaExecutable="$(cd "$javaHome" && pwd -P)/javac"
else
- javaExecutable="`readlink -f \"$javaExecutable\"`"
+ javaExecutable="$(readlink -f "$javaExecutable")"
fi
- javaHome="`dirname \"$javaExecutable\"`"
- javaHome=`expr "$javaHome" : '\(.*\)/bin'`
+ javaHome="$(dirname "$javaExecutable")"
+ javaHome=$(expr "$javaHome" : '\(.*\)/bin')
JAVA_HOME="$javaHome"
export JAVA_HOME
fi
fi
fi
-if [ -z "$JAVACMD" ] ; then
- if [ -n "$JAVA_HOME" ] ; then
- if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
+if [ -z "$JAVACMD" ]; then
+ if [ -n "$JAVA_HOME" ]; then
+ if [ -x "$JAVA_HOME/jre/sh/java" ]; then
# IBM's JDK on AIX uses strange locations for the executables
JAVACMD="$JAVA_HOME/jre/sh/java"
else
JAVACMD="$JAVA_HOME/bin/java"
fi
else
- JAVACMD="`\\unset -f command; \\command -v java`"
+ JAVACMD="$(
+ \unset -f command 2>/dev/null
+ \command -v java
+ )"
fi
fi
-if [ ! -x "$JAVACMD" ] ; then
+if [ ! -x "$JAVACMD" ]; then
echo "Error: JAVA_HOME is not defined correctly." >&2
echo " We cannot execute $JAVACMD" >&2
exit 1
fi
-if [ -z "$JAVA_HOME" ] ; then
- echo "Warning: JAVA_HOME environment variable is not set."
+if [ -z "$JAVA_HOME" ]; then
+ echo "Warning: JAVA_HOME environment variable is not set." >&2
fi
# traverses directory structure from process work directory to filesystem root
# first directory with .mvn subdirectory is considered project base directory
find_maven_basedir() {
- if [ -z "$1" ]
- then
- echo "Path not specified to find_maven_basedir"
+ if [ -z "$1" ]; then
+ echo "Path not specified to find_maven_basedir" >&2
return 1
fi
basedir="$1"
wdir="$1"
- while [ "$wdir" != '/' ] ; do
- if [ -d "$wdir"/.mvn ] ; then
+ while [ "$wdir" != '/' ]; do
+ if [ -d "$wdir"/.mvn ]; then
basedir=$wdir
break
fi
# workaround for JBEAP-8937 (on Solaris 10/Sparc)
if [ -d "${wdir}" ]; then
- wdir=`cd "$wdir/.."; pwd`
+ wdir=$(
+ cd "$wdir/.." || exit 1
+ pwd
+ )
fi
# end of workaround
done
- printf '%s' "$(cd "$basedir"; pwd)"
+ printf '%s' "$(
+ cd "$basedir" || exit 1
+ pwd
+ )"
}
# concatenates all lines of a file
concat_lines() {
if [ -f "$1" ]; then
- echo "$(tr -s '\n' ' ' < "$1")"
+ # Remove \r in case we run on Windows within Git Bash
+ # and check out the repository with auto CRLF management
+ # enabled. Otherwise, we may read lines that are delimited with
+ # \r\n and produce $'-Xarg\r' rather than -Xarg due to word
+ # splitting rules.
+ tr -s '\r\n' ' ' <"$1"
fi
}
-BASE_DIR=$(find_maven_basedir "$(dirname $0)")
+log() {
+ if [ "$MVNW_VERBOSE" = true ]; then
+ printf '%s\n' "$1"
+ fi
+}
+
+BASE_DIR=$(find_maven_basedir "$(dirname "$0")")
if [ -z "$BASE_DIR" ]; then
- exit 1;
+ exit 1
fi
-MAVEN_PROJECTBASEDIR=${MAVEN_BASEDIR:-"$BASE_DIR"}; export MAVEN_PROJECTBASEDIR
-if [ "$MVNW_VERBOSE" = true ]; then
- echo $MAVEN_PROJECTBASEDIR
-fi
+MAVEN_PROJECTBASEDIR=${MAVEN_BASEDIR:-"$BASE_DIR"}
+export MAVEN_PROJECTBASEDIR
+log "$MAVEN_PROJECTBASEDIR"
##########################################################################################
# Extension to allow automatically downloading the maven-wrapper.jar from Maven-central
# This allows using the maven wrapper in projects that prohibit checking in binary data.
##########################################################################################
-if [ -r "$BASE_DIR/.mvn/wrapper/maven-wrapper.jar" ]; then
- if [ "$MVNW_VERBOSE" = true ]; then
- echo "Found .mvn/wrapper/maven-wrapper.jar"
- fi
+wrapperJarPath="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.jar"
+if [ -r "$wrapperJarPath" ]; then
+ log "Found $wrapperJarPath"
else
- if [ "$MVNW_VERBOSE" = true ]; then
- echo "Couldn't find .mvn/wrapper/maven-wrapper.jar, downloading it ..."
- fi
- if [ -n "$MVNW_REPOURL" ]; then
- wrapperUrl="$MVNW_REPOURL/org/apache/maven/wrapper/maven-wrapper/3.1.1/maven-wrapper-3.1.1.jar"
- else
- wrapperUrl="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.1.1/maven-wrapper-3.1.1.jar"
- fi
- while IFS="=" read key value; do
- case "$key" in (wrapperUrl) wrapperUrl="$value"; break ;;
- esac
- done < "$BASE_DIR/.mvn/wrapper/maven-wrapper.properties"
- if [ "$MVNW_VERBOSE" = true ]; then
- echo "Downloading from: $wrapperUrl"
- fi
- wrapperJarPath="$BASE_DIR/.mvn/wrapper/maven-wrapper.jar"
- if $cygwin; then
- wrapperJarPath=`cygpath --path --windows "$wrapperJarPath"`
- fi
+ log "Couldn't find $wrapperJarPath, downloading it ..."
- if command -v wget > /dev/null; then
- QUIET="--quiet"
- if [ "$MVNW_VERBOSE" = true ]; then
- echo "Found wget ... using wget"
- QUIET=""
- fi
- if [ -z "$MVNW_USERNAME" ] || [ -z "$MVNW_PASSWORD" ]; then
- wget $QUIET "$wrapperUrl" -O "$wrapperJarPath"
- else
- wget $QUIET --http-user="$MVNW_USERNAME" --http-password="$MVNW_PASSWORD" "$wrapperUrl" -O "$wrapperJarPath"
- fi
- [ $? -eq 0 ] || rm -f "$wrapperJarPath"
- elif command -v curl > /dev/null; then
- QUIET="--silent"
- if [ "$MVNW_VERBOSE" = true ]; then
- echo "Found curl ... using curl"
- QUIET=""
- fi
- if [ -z "$MVNW_USERNAME" ] || [ -z "$MVNW_PASSWORD" ]; then
- curl $QUIET -o "$wrapperJarPath" "$wrapperUrl" -f -L
- else
- curl $QUIET --user "$MVNW_USERNAME:$MVNW_PASSWORD" -o "$wrapperJarPath" "$wrapperUrl" -f -L
- fi
- [ $? -eq 0 ] || rm -f "$wrapperJarPath"
+ if [ -n "$MVNW_REPOURL" ]; then
+ wrapperUrl="$MVNW_REPOURL/org/apache/maven/wrapper/maven-wrapper/3.3.2/maven-wrapper-3.3.2.jar"
+ else
+ wrapperUrl="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.3.2/maven-wrapper-3.3.2.jar"
+ fi
+ while IFS="=" read -r key value; do
+ # Remove '\r' from value to allow usage on windows as IFS does not consider '\r' as a separator ( considers space, tab, new line ('\n'), and custom '=' )
+ safeValue=$(echo "$value" | tr -d '\r')
+ case "$key" in wrapperUrl)
+ wrapperUrl="$safeValue"
+ break
+ ;;
+ esac
+ done <"$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.properties"
+ log "Downloading from: $wrapperUrl"
+
+ if $cygwin; then
+ wrapperJarPath=$(cygpath --path --windows "$wrapperJarPath")
+ fi
+
+ if command -v wget >/dev/null; then
+ log "Found wget ... using wget"
+ [ "$MVNW_VERBOSE" = true ] && QUIET="" || QUIET="--quiet"
+ if [ -z "$MVNW_USERNAME" ] || [ -z "$MVNW_PASSWORD" ]; then
+ wget $QUIET "$wrapperUrl" -O "$wrapperJarPath" || rm -f "$wrapperJarPath"
else
- if [ "$MVNW_VERBOSE" = true ]; then
- echo "Falling back to using Java to download"
- fi
- javaSource="$BASE_DIR/.mvn/wrapper/MavenWrapperDownloader.java"
- javaClass="$BASE_DIR/.mvn/wrapper/MavenWrapperDownloader.class"
- # For Cygwin, switch paths to Windows format before running javac
- if $cygwin; then
- javaSource=`cygpath --path --windows "$javaSource"`
- javaClass=`cygpath --path --windows "$javaClass"`
- fi
- if [ -e "$javaSource" ]; then
- if [ ! -e "$javaClass" ]; then
- if [ "$MVNW_VERBOSE" = true ]; then
- echo " - Compiling MavenWrapperDownloader.java ..."
- fi
- # Compiling the Java class
- ("$JAVA_HOME/bin/javac" "$javaSource")
- fi
- if [ -e "$javaClass" ]; then
- # Running the downloader
- if [ "$MVNW_VERBOSE" = true ]; then
- echo " - Running MavenWrapperDownloader.java ..."
- fi
- ("$JAVA_HOME/bin/java" -cp .mvn/wrapper MavenWrapperDownloader "$MAVEN_PROJECTBASEDIR")
- fi
- fi
+ wget $QUIET --http-user="$MVNW_USERNAME" --http-password="$MVNW_PASSWORD" "$wrapperUrl" -O "$wrapperJarPath" || rm -f "$wrapperJarPath"
fi
+ elif command -v curl >/dev/null; then
+ log "Found curl ... using curl"
+ [ "$MVNW_VERBOSE" = true ] && QUIET="" || QUIET="--silent"
+ if [ -z "$MVNW_USERNAME" ] || [ -z "$MVNW_PASSWORD" ]; then
+ curl $QUIET -o "$wrapperJarPath" "$wrapperUrl" -f -L || rm -f "$wrapperJarPath"
+ else
+ curl $QUIET --user "$MVNW_USERNAME:$MVNW_PASSWORD" -o "$wrapperJarPath" "$wrapperUrl" -f -L || rm -f "$wrapperJarPath"
+ fi
+ else
+ log "Falling back to using Java to download"
+ javaSource="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/MavenWrapperDownloader.java"
+ javaClass="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/MavenWrapperDownloader.class"
+ # For Cygwin, switch paths to Windows format before running javac
+ if $cygwin; then
+ javaSource=$(cygpath --path --windows "$javaSource")
+ javaClass=$(cygpath --path --windows "$javaClass")
+ fi
+ if [ -e "$javaSource" ]; then
+ if [ ! -e "$javaClass" ]; then
+ log " - Compiling MavenWrapperDownloader.java ..."
+ ("$JAVA_HOME/bin/javac" "$javaSource")
+ fi
+ if [ -e "$javaClass" ]; then
+ log " - Running MavenWrapperDownloader.java ..."
+ ("$JAVA_HOME/bin/java" -cp .mvn/wrapper MavenWrapperDownloader "$wrapperUrl" "$wrapperJarPath") || rm -f "$wrapperJarPath"
+ fi
+ fi
+ fi
fi
##########################################################################################
# End of extension
##########################################################################################
+# If specified, validate the SHA-256 sum of the Maven wrapper jar file
+wrapperSha256Sum=""
+while IFS="=" read -r key value; do
+ case "$key" in wrapperSha256Sum)
+ wrapperSha256Sum=$value
+ break
+ ;;
+ esac
+done <"$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.properties"
+if [ -n "$wrapperSha256Sum" ]; then
+ wrapperSha256Result=false
+ if command -v sha256sum >/dev/null; then
+ if echo "$wrapperSha256Sum $wrapperJarPath" | sha256sum -c >/dev/null 2>&1; then
+ wrapperSha256Result=true
+ fi
+ elif command -v shasum >/dev/null; then
+ if echo "$wrapperSha256Sum $wrapperJarPath" | shasum -a 256 -c >/dev/null 2>&1; then
+ wrapperSha256Result=true
+ fi
+ else
+ echo "Checksum validation was requested but neither 'sha256sum' or 'shasum' are available." >&2
+ echo "Please install either command, or disable validation by removing 'wrapperSha256Sum' from your maven-wrapper.properties." >&2
+ exit 1
+ fi
+ if [ $wrapperSha256Result = false ]; then
+ echo "Error: Failed to validate Maven wrapper SHA-256, your Maven wrapper might be compromised." >&2
+ echo "Investigate or delete $wrapperJarPath to attempt a clean download." >&2
+ echo "If you updated your Maven version, you need to update the specified wrapperSha256Sum property." >&2
+ exit 1
+ fi
+fi
+
MAVEN_OPTS="$(concat_lines "$MAVEN_PROJECTBASEDIR/.mvn/jvm.config") $MAVEN_OPTS"
# For Cygwin, switch paths to Windows format before running java
if $cygwin; then
- [ -n "$JAVA_HOME" ] &&
- JAVA_HOME=`cygpath --path --windows "$JAVA_HOME"`
- [ -n "$CLASSPATH" ] &&
- CLASSPATH=`cygpath --path --windows "$CLASSPATH"`
- [ -n "$MAVEN_PROJECTBASEDIR" ] &&
- MAVEN_PROJECTBASEDIR=`cygpath --path --windows "$MAVEN_PROJECTBASEDIR"`
+ [ -n "$JAVA_HOME" ] \
+ && JAVA_HOME=$(cygpath --path --windows "$JAVA_HOME")
+ [ -n "$CLASSPATH" ] \
+ && CLASSPATH=$(cygpath --path --windows "$CLASSPATH")
+ [ -n "$MAVEN_PROJECTBASEDIR" ] \
+ && MAVEN_PROJECTBASEDIR=$(cygpath --path --windows "$MAVEN_PROJECTBASEDIR")
fi
# Provide a "standardized" way to retrieve the CLI args that will
# work with both Windows and non-Windows executions.
-MAVEN_CMD_LINE_ARGS="$MAVEN_CONFIG $@"
+MAVEN_CMD_LINE_ARGS="$MAVEN_CONFIG $*"
export MAVEN_CMD_LINE_ARGS
WRAPPER_LAUNCHER=org.apache.maven.wrapper.MavenWrapperMain
+# shellcheck disable=SC2086 # safe args
exec "$JAVACMD" \
$MAVEN_OPTS \
$MAVEN_DEBUG_OPTS \
diff --git a/mvnw.cmd b/mvnw.cmd
index 474c9d6b7..4136715f0 100644
--- a/mvnw.cmd
+++ b/mvnw.cmd
@@ -18,7 +18,7 @@
@REM ----------------------------------------------------------------------------
@REM ----------------------------------------------------------------------------
-@REM Apache Maven Wrapper startup batch script, version 3.1.1
+@REM Apache Maven Wrapper startup batch script, version 3.3.2
@REM
@REM Required ENV vars:
@REM JAVA_HOME - location of a JDK home dir
@@ -59,22 +59,22 @@ set ERROR_CODE=0
@REM ==== START VALIDATION ====
if not "%JAVA_HOME%" == "" goto OkJHome
-echo.
+echo. >&2
echo Error: JAVA_HOME not found in your environment. >&2
echo Please set the JAVA_HOME variable in your environment to match the >&2
echo location of your Java installation. >&2
-echo.
+echo. >&2
goto error
:OkJHome
if exist "%JAVA_HOME%\bin\java.exe" goto init
-echo.
+echo. >&2
echo Error: JAVA_HOME is set to an invalid directory. >&2
echo JAVA_HOME = "%JAVA_HOME%" >&2
echo Please set the JAVA_HOME variable in your environment to match the >&2
echo location of your Java installation. >&2
-echo.
+echo. >&2
goto error
@REM ==== END VALIDATION ====
@@ -119,7 +119,7 @@ SET MAVEN_JAVA_EXE="%JAVA_HOME%\bin\java.exe"
set WRAPPER_JAR="%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.jar"
set WRAPPER_LAUNCHER=org.apache.maven.wrapper.MavenWrapperMain
-set WRAPPER_URL="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.1.1/maven-wrapper-3.1.1.jar"
+set WRAPPER_URL="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.3.2/maven-wrapper-3.3.2.jar"
FOR /F "usebackq tokens=1,2 delims==" %%A IN ("%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.properties") DO (
IF "%%A"=="wrapperUrl" SET WRAPPER_URL=%%B
@@ -133,7 +133,7 @@ if exist %WRAPPER_JAR% (
)
) else (
if not "%MVNW_REPOURL%" == "" (
- SET WRAPPER_URL="%MVNW_REPOURL%/org/apache/maven/wrapper/maven-wrapper/3.1.1/maven-wrapper-3.1.1.jar"
+ SET WRAPPER_URL="%MVNW_REPOURL%/org/apache/maven/wrapper/maven-wrapper/3.3.2/maven-wrapper-3.3.2.jar"
)
if "%MVNW_VERBOSE%" == "true" (
echo Couldn't find %WRAPPER_JAR%, downloading it ...
@@ -153,6 +153,25 @@ if exist %WRAPPER_JAR% (
)
@REM End of extension
+@REM If specified, validate the SHA-256 sum of the Maven wrapper jar file
+SET WRAPPER_SHA_256_SUM=""
+FOR /F "usebackq tokens=1,2 delims==" %%A IN ("%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.properties") DO (
+ IF "%%A"=="wrapperSha256Sum" SET WRAPPER_SHA_256_SUM=%%B
+)
+IF NOT %WRAPPER_SHA_256_SUM%=="" (
+ powershell -Command "&{"^
+ "Import-Module $PSHOME\Modules\Microsoft.PowerShell.Utility -Function Get-FileHash;"^
+ "$hash = (Get-FileHash \"%WRAPPER_JAR%\" -Algorithm SHA256).Hash.ToLower();"^
+ "If('%WRAPPER_SHA_256_SUM%' -ne $hash){"^
+ " Write-Error 'Error: Failed to validate Maven wrapper SHA-256, your Maven wrapper might be compromised.';"^
+ " Write-Error 'Investigate or delete %WRAPPER_JAR% to attempt a clean download.';"^
+ " Write-Error 'If you updated your Maven version, you need to update the specified wrapperSha256Sum property.';"^
+ " exit 1;"^
+ "}"^
+ "}"
+ if ERRORLEVEL 1 goto error
+)
+
@REM Provide a "standardized" way to retrieve the CLI args that will
@REM work with both Windows and non-Windows executions.
set MAVEN_CMD_LINE_ARGS=%*
diff --git a/pom.xml b/pom.xml
index da423ac86..d7e95ee07 100644
--- a/pom.xml
+++ b/pom.xml
@@ -70,7 +70,7 @@
3.1.1
3.0.0-M2
- 3.8.4
+ 3.9.8
3.0.2
3.1.0
3.1.1
@@ -350,7 +350,7 @@
- [${version.maven},3.8.5),[3.8.6,)
+ [${version.maven},)