and removing rspec

Gemfile

@@ -15,13 +15,12 @@ gem "ruby2js" , path: "../ruby2js"
 
 group :development, :test do
   gem "capybara"
-  gem 'guard-rspec', require: false
   gem "selenium-webdriver"
   gem "webdrivers"
   gem "puma"
-  gem 'rspec-rails' , require: "rspec-rails"
   gem 'guard-minitest'
-end
+  gem 'guard' # NOTE: this is necessary in newer versions
+ end
 
 # Start debugger with binding.b [https://github.com/ruby/debug]
 # gem "debug", ">= 1.0.0"

Gemfile.lock

@@ -110,7 +110,6 @@ GEM
       railties (>= 4.1.0)
       responders
       warden (~> 1.2.3)
-    diff-lcs (1.5.0)
     erubi (1.11.0)
     ffi (1.15.5)
     formatador (1.1.0)
@@ -132,10 +131,6 @@ GEM
     guard-minitest (2.4.6)
       guard-compat (~> 1.2)
       minitest (>= 3.0)
-    guard-rspec (4.7.3)
-      guard (~> 2.1)
-      guard-compat (~> 1.1)
-      rspec (>= 2.99.0, < 4.0)
     haml (6.0.12)
       temple (>= 0.8.2)
       thor
@@ -230,27 +225,6 @@ GEM
       actionpack (>= 5.0)
       railties (>= 5.0)
     rexml (3.2.5)
-    rspec (3.12.0)
-      rspec-core (~> 3.12.0)
-      rspec-expectations (~> 3.12.0)
-      rspec-mocks (~> 3.12.0)
-    rspec-core (3.12.0)
-      rspec-support (~> 3.12.0)
-    rspec-expectations (3.12.0)
-      diff-lcs (>= 1.2.0, < 2.0)
-      rspec-support (~> 3.12.0)
-    rspec-mocks (3.12.0)
-      diff-lcs (>= 1.2.0, < 2.0)
-      rspec-support (~> 3.12.0)
-    rspec-rails (6.0.1)
-      actionpack (>= 6.1)
-      activesupport (>= 6.1)
-      railties (>= 6.1)
-      rspec-core (~> 3.11)
-      rspec-expectations (~> 3.11)
-      rspec-mocks (~> 3.11)
-      rspec-support (~> 3.11)
-    rspec-support (3.12.0)
     rubyzip (2.3.2)
     selenium-webdriver (4.7.1)
       rexml (~> 3.2, >= 3.2.5)
@@ -292,13 +266,12 @@ PLATFORMS
 DEPENDENCIES
   capybara
   devise
+  guard
   guard-minitest
-  guard-rspec
   haml-rails
   importmap-rails
   merged!
   puma
-  rspec-rails
   ruby2js!
   selenium-webdriver
   sprockets-rails

Guardfile

@@ -1,28 +1,3 @@
-# A sample Guardfile
-# More info at https://github.com/guard/guard#readme
-
-## Uncomment and set this to only include directories you want to watch
-# directories %w(app lib config test spec features) \
-#  .select{|d| Dir.exist?(d) ? d : UI.warning("Directory #{d} does not exist")}
-
-## Note: if you are using the `directories` clause above and you are not
-## watching the project directory ('.'), then you will want to move
-## the Guardfile to a watched dir and symlink it back, e.g.
-#
-#  $ mkdir config
-#  $ mv Guardfile config/
-#  $ ln -s config/Guardfile .
-#
-# and, you'll have to watch "config/Guardfile" instead of "Guardfile"
-
-# Note: The cmd option is now required due to the increasing number of ways
-#       rspec may be run, below are examples of the most common uses.
-#  * bundler: 'bundle exec rspec'
-#  * bundler binstubs: 'bin/rspec'
-#  * spring: 'bin/rspec' (This will use spring if running and you have
-#                          installed the spring binstubs per the docs)
-#  * zeus: 'zeus rspec' (requires the server to be started separately)
-#  * 'just' rspec: 'rspec'
 
 
 guard :minitest do
@@ -31,49 +6,3 @@ guard :minitest do
   watch(%r{^lib/(.*/)?([^/]+)\.rb$})     { |m| "test/#{m[1]}#{m[2]}_test.rb" }
   watch(%r{^test/test_helper\.rb$})      { 'test' }
 end
-
-guard :rspec, cmd: "bundle exec rspec" do
-  require "guard/rspec/dsl"
-  dsl = Guard::RSpec::Dsl.new(self)
-
-  # Feel free to open issues for suggestions and improvements
-
-  # RSpec files
-  rspec = dsl.rspec
-  watch(rspec.spec_helper) { rspec.spec_dir }
-  watch(rspec.spec_support) { rspec.spec_dir }
-  watch(rspec.spec_files)
-
-  # Ruby files
-  ruby = dsl.ruby
-  dsl.watch_spec_files_for(ruby.lib_files)
-
-  # Rails files
-  rails = dsl.rails(view_extensions: %w(erb haml slim))
-  dsl.watch_spec_files_for(rails.app_files)
-  dsl.watch_spec_files_for(rails.views)
-
-  watch(rails.controllers) do |m|
-    [
-      rspec.spec.call("routing/#{m[1]}_routing"),
-      rspec.spec.call("controllers/#{m[1]}_controller"),
-      rspec.spec.call("acceptance/#{m[1]}")
-    ]
-  end
-
-  # Rails config changes
-  watch(rails.spec_helper)     { rspec.spec_dir }
-  watch(rails.routes)          { "#{rspec.spec_dir}/routing" }
-  watch(rails.app_controller)  { "#{rspec.spec_dir}/controllers" }
-
-  # Capybara features specs
-  watch(rails.view_dirs)     { |m| rspec.spec.call("features/#{m[1]}") }
-  watch(rails.layouts)       { |m| rspec.spec.call("features/#{m[1]}") }
-
-  # Turnip features and steps
-  watch(%r{^spec/acceptance/(.+)\.feature$})
-  watch(%r{^spec/acceptance/steps/(.+)_steps\.rb$}) do |m|
-    Dir[File.join("**/#{m[1]}.feature")][0] || "spec/acceptance"
-  end
-  notification :off
-end

bin/rails

@@ -22,4 +22,3 @@ require "action_view/railtie"
 # require "action_cable/engine"
 
 require "rails/engine/commands"
-require "rspec-rails"

spec/rails_helper.rb

@@ -1,61 +0,0 @@
-# This file is copied to spec/ when you run 'rails generate rspec:install'
-require 'spec_helper'
-ENV['RAILS_ENV'] ||= 'test'
-require_relative '../test/dummy/config/environment'
-# Prevent database truncation if the environment is production
-abort("The Rails environment is running in production mode!") if Rails.env.production?
-require 'rspec/rails'
-require 'capybara/rails'
-
-# Add additional requires below this line. Rails is not loaded until this point!
-
-# Requires supporting ruby files with custom matchers and macros, etc, in
-# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
-# run as spec files by default. This means that files in spec/support that end
-# in _spec.rb will both be required and run as specs, causing the specs to be
-# run twice. It is recommended that you do not name files matching this glob to
-# end with _spec.rb. You can configure this pattern with the --pattern
-# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
-#
-# The following line is provided for convenience purposes. It has the downside
-# of increasing the boot-up time by auto-requiring all files in the support
-# directory. Alternatively, in the individual `*_spec.rb` files, manually
-# require only the support files necessary.
-#
-# Dir[Rails.root.join('spec', 'support', '**', '*.rb')].sort.each { |f| require f }
-
-Capybara.javascript_driver = :selenium_headless
-
-RSpec.configure do |config|
-
-
-  # Remove this line to enable support for ActiveRecord
-  config.use_active_record = false
-
-  # If you enable ActiveRecord support you should uncomment these lines,
-  # note if you'd prefer not to run each example within a transaction, you
-  # should set use_transactional_fixtures to false.
-  #
-  # config.fixture_path = "#{::Rails.root}/spec/fixtures"
-  # config.use_transactional_fixtures = true
-
-  # RSpec Rails can automatically mix in different behaviours to your tests
-  # based on their file location, for example enabling you to call `get` and
-  # `post` in specs under `spec/controllers`.
-  #
-  # You can disable this behaviour by removing the line below, and instead
-  # explicitly tag your specs with their type, e.g.:
-  #
-  #     RSpec.describe UsersController, type: :controller do
-  #       # ...
-  #     end
-  #
-  # The different available types are documented in the features, such as in
-  # https://relishapp.com/rspec/rspec-rails/docs
-  config.infer_spec_type_from_file_location!
-
-  # Filter lines from Rails gems in backtraces.
-  config.filter_rails_from_backtrace!
-  # arbitrary gems may also be filtered via:
-  # config.filter_gems_from_backtrace("gem name")
-end

spec/spec_helper.rb

@@ -1,106 +0,0 @@
-require 'capybara/rspec'
-require "git"
-
-# This file was generated by the `rails generate rspec:install` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause
-# this file to always be loaded, without a need to explicitly require it in any
-# files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-# See https://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
-RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
-  config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
-    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
-  end
-
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
-  config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
-    mocks.verify_partial_doubles = true
-  end
-
-  config.before(:each) do |example|
-    # reset data so we can delete/edit/add at will. aka DatabaseCleaner
-    module Merged
-      git = Git.open(Engine.root)
-      git.checkout_file("HEAD" , "test/dummy/merged")
-      [Page, Section, Card].each { |m| m.reload(true) }
-    end
-  end
-
-  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
-  # have no way to turn it off -- the option exists only for backwards
-  # compatibility in RSpec 3). It causes shared context metadata to be
-  # inherited by the metadata hash of host groups and examples, rather than
-  # triggering implicit auto-inclusion in groups with matching metadata.
-  config.shared_context_metadata_behavior = :apply_to_host_groups
-
-# The settings below are suggested to provide a good initial experience
-# with RSpec, but feel free to customize to your heart's content.
-=begin
-  # This allows you to limit a spec run to individual examples or groups
-  # you care about by tagging them with `:focus` metadata. When nothing
-  # is tagged with `:focus`, all examples get run. RSpec also provides
-  # aliases for `it`, `describe`, and `context` that include `:focus`
-  # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
-  config.filter_run_when_matching :focus
-
-  # Allows RSpec to persist some state between runs in order to support
-  # the `--only-failures` and `--next-failure` CLI options. We recommend
-  # you configure your source control system to ignore this file.
-  config.example_status_persistence_file_path = "spec/examples.txt"
-
-  # Limits the available syntax to the non-monkey patched syntax that is
-  # recommended. For more details, see:
-  # https://relishapp.com/rspec/rspec-core/docs/configuration/zero-monkey-patching-mode
-  config.disable_monkey_patching!
-
-  # Many RSpec users commonly either run the entire suite or an individual
-  # file, and it's useful to allow more verbose output when running an
-  # individual spec file.
-  if config.files_to_run.one?
-    # Use the documentation formatter for detailed output,
-    # unless a formatter has already been configured
-    # (e.g. via a command-line flag).
-    config.default_formatter = "doc"
-  end
-
-  # Print the 10 slowest examples and example groups at the
-  # end of the spec run, to help surface which specs are running
-  # particularly slow.
-  config.profile_examples = 10
-
-  # Run specs in random order to surface order dependencies. If you find an
-  # order dependency and want to debug it, you can fix the order by providing
-  # the seed, which is printed after each run.
-  #     --seed 1234
-  config.order = :random
-
-  # Seed global randomization in this process using the `--seed` CLI option.
-  # Setting this allows you to use `--seed` to deterministically reproduce
-  # test failures related to randomization by passing the same `--seed` value
-  # as the one that triggered the failure.
-  Kernel.srand config.seed
-=end
-end

test/integration/view_test.rb

@@ -6,7 +6,7 @@ class ViewTest < ActionDispatch::IntegrationTest
   def test_returns_ok_all_pages
     Merged::Page.all.each do |page|
       visit "/" + page.name
-      assert_equal "/#{current_path}" , page.name
+      assert_equal "/#{page.name}" , current_path
     end
   end
 end